The Peugeot 206 Info Exchange › Forums › Request a how-to › Post a reply › Re: replace door locks and ignition barrell with pics

Request a how-to › Post a reply › Re: replace door locks and ignition barrell with pics

Username

Subject

Message body

Emoticons






More smilies

[quote="Harry"][quote="MrBSI"][quote="Harry"]You will really struggle with getting the door ones off without removing the doorcards I doubt it's possible as they need to be undone and reconnected to the solenoids inside. 
[/quote]

[quote="smiddies"]
You will need to take the doorcard off to gain access to behind the door lock, basically its got a metal holder, get a flat head and a hammer, and basically place the flat head into the corner of the metal holder, and hit with hammer, and then just switch the door lock over, ensuring the plastic bit on the door lock is back into position! 
[/quote]

Do either of you 2 actually know what your talking about?  :roll:

Door lock barrels on a 206 & most other PSA Peugeot / Citroen stuff, p**s easy job, less then 90 seconds a side, no need to remove the door card, Peugeot designed in an easy way of removing the lock barrel securing clip.

Remove rubber bung.

Insert your threaded tool & screw it in to the clip.

Push the tool in to the door to release the clip.

Lift the barrel out & unclip it.

Refitting is reversal of removal.

Ignition barrel - about 5 minutes:

Remove the plastic trim around the steering lock.

Unplug the barrel from the wiring loom.

Check for a small securing grub screw in end of barrel ( not all barrels have this! )

Insert key & turn to the LOCK SERVICE position.

Push the securing clip down & then pull the barrel out the steering lock, if the transponder aerial gets in the way unplug / unclip it.

Refitting is reversal of removal.[/quote]

Yes I do, thanks.

Done it before and taking the door card made it 10 times easier and only took 30 seconds to remove.

Other people have opinions and different ways of doing things you know.[/quote]

Options
HTML is ON
BBCode is ON
Smilies are ON

	Disable HTML in this post
	Disable BBCode in this post
	Disable Smilies in this post