#1: Bleed screws. Author: Danweider, Posted: Wed Nov 22, 2017 9:36 am ---- Hi lads, I am currently after x4 bleed screws, x2 for the calipers, x2 for the rear drums, on my peugeot 206 1.4. I cannot find where to buy them for the life of me. Any suggestions?
Thanks
Dan
#2: Re: Bleed screws. Author: gazza82, Location: South BucksPosted: Wed Nov 22, 2017 11:07 am ---- Dealer? Peugeot or Citroen will be able to get them .. and don't assume they are more expensive .. I've bought new parts from them cheaper than I could find on fleabay!
#3: Re: Bleed screws. Author: LeeThr, Location: North West WalesPosted: Wed Nov 22, 2017 12:09 pm ---- Brakes International
#4: Re: Bleed screws. Author: Danweider, Posted: Wed Nov 22, 2017 5:57 pm ---- Cheers guys! Went to my local dealership, got x4 on order for £18! Happy days.
#5: Re: Bleed screws. Author: LeeThr, Location: North West WalesPosted: Thu Nov 23, 2017 3:27 pm ---- £18 for 4 bleed screws? Ouch....
#6: Re: Bleed screws. Author: Danweider, Posted: Fri Nov 24, 2017 12:06 pm ---- I know quite deer. But this is another thing I need to come on to..the rear bleed screws in the hubs, are seriously stuck, I have tried soaking in WD40, and with a pair of mole grips, trying to wiggle them free..no luck. I have gone out and got some plus gas lubricant which I will be trying, also I am going to try heating them up if the plus gas, fails. Any other ideas? I cannot get a spanner on there as they just keep slipping.
#7: Re: Bleed screws. Author: gazza82, Location: South BucksPosted: Fri Nov 24, 2017 3:16 pm ---- Now I know why one of our rear caliper bleed screws was snapped off ..
#8: Re: Bleed screws. Author: LeeThr, Location: North West WalesPosted: Fri Nov 24, 2017 5:12 pm ---- Use a proper flared brake union spanner and apply plenty of heat first.
#9: Re: Bleed screws. Author: Danweider, Posted: Fri Nov 24, 2017 6:43 pm ---- Gazza, i think the only solution for that is a new caliper, when needing to bleed, although my college tutor (studying vehicle mechanics) said you can get away with just bleeding the other points it should be fine.
Lee, i dont have a flare spanner, would mole grips do the job? Being careful of course.
Thank you for the help
Dan.
#10: Re: Bleed screws. Author: Indigo_GTI, Location: AberdeenshirePosted: Fri Nov 24, 2017 11:36 pm ---- try a socket (best fit, ie hexagon only, not a double hexagon style socket) and a bit of heat as suggested. Stainless bleed screws are a good investment, particularly if you plan the keep the car for a while.
#11: Re: Bleed screws. Author: gazza82, Location: South BucksPosted: Sat Nov 25, 2017 12:45 am ----
Danweider wrote:
Gazza, i think the only solution for that is a new caliper, when needing to bleed, although my college tutor (studying vehicle mechanics) said you can get away with just bleeding the other points it should be fine.
Lee, i dont have a flare spanner, would mole grips do the job? Being careful of course.
Thank you for the help
Dan.
Sold the CC! Not my probkem now
#12: Re: Bleed screws. Author: Danweider, Posted: Sun Nov 26, 2017 1:16 pm ---- I've tried heating them with a blowtorch, using plus gas lubricant, no avail. It's completely rounded now. Anyone have any last minute tips before it goes to the garage?
#13: Re: Bleed screws. Author: Indigo_GTI, Location: AberdeenshirePosted: Tue Nov 28, 2017 12:22 pm ---- hammer on a socket that's a bit too small, might be enough to grip it. If it does come off, its easy enough to get the bit out of the socket with a metal punch
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17112
Online Now [55]:
Visitors: 55
Members: 0
Staff Online Now:
Page Views:
General
