#16: Re: 206T16's Ecosse 206 Virtuel Thread Author: Brian, Location: VVT Land, FifePosted: Mon Feb 15, 2010 6:36 pm ---- Nice to see you back Graeme Tiz true what you say though folks, the paint on this thing is pretty damn flawless apart from shipped splitters! Can't help that though!
#17: Re: 206T16's Ecosse 206 Virtuel Thread Author: 206T16, Posted: Tue Feb 16, 2010 3:35 am ---- Cheers for all the positive comments guys, will be 2 years old this April and still gets good feedback
JackFOG wrote:
The interior shots - did you re-paint the centre console and dash-board, or just laquer it? It looks really tidy, nice work mate!
The centre console and the instrument binnacle were both sprayed graphite then lacquered
Brian wrote:
Nice to see you back Graeme Tiz true what you say though folks, the paint on this thing is pretty damn flawless apart from shipped splitters! Can't help that though
Cheers Brian, ive now got new splitters on them and im determined to keep these ones perfect and so far i have so fingers crossed!
#18: Re: 206T16's Ecosse 206 Virtuel Thread Author: andrewpro, Location: londonPosted: Sat Feb 20, 2010 12:48 pm ---- what lacquer did you use to get the high gloss effect ??
#19: Re: 206T16's Ecosse 206 Virtuel Thread Author: anthony_839, Location: romfordPosted: Sat Feb 20, 2010 1:27 pm ---- verry nice car i love the barnical was that hard to do thinking of that or a leather on for my car.
#20: Re: 206T16's Ecosse 206 Virtuel Thread Author: chrisgordon7gti, Location: DurhamPosted: Sun Feb 21, 2010 4:46 pm ---- Your car looks ace mate.
#21: Re: 206T16's Ecosse 206 Virtuel Thread Author: bolly92, Location: LongridgePosted: Sun Feb 21, 2010 4:58 pm ---- bet that interior is a b***h when the sun shines on it ! just a thought, but a really nice car.
#22: Re: 206T16's Ecosse 206 Virtuel Thread Author: S222Chan, Location: Northampton/SomersetPosted: Sun Feb 21, 2010 8:37 pm ---- Love the work gone into this mate, especially the shine on the rubstrips
what colour did u have them resprayed in??
#23: Re: 206T16's Ecosse 206 Virtuel Thread Author: coopskin, Location: Hull, East YorkshirePosted: Sun Feb 21, 2010 9:09 pm ---- can i ask how you got Hid's to work with your masked valeos
#24: Re: 206T16's Ecosse 206 Virtuel Thread Author: 206T16, Posted: Mon Feb 22, 2010 4:35 am ---- andrewpro - I've no idea what lacquer was used as Ecosse did it for me.
anthony_839 - Ecosse also did the binnacle so i couldnt say how hard it was, they did say though it was abit tricky having to sand it down and the prepping of it.
Bolly92 - It's not that bad when the sun hits it, although usually at night i get the street lights, bouncing off it and onto my windscreen lol
coopskin - Ecosse fitted the HIDs
#25: Re: 206T16's Ecosse 206 Virtuel Thread Author: Ross, Location: West MidlandsPosted: Mon Feb 22, 2010 6:59 am ----
coopskin wrote:
can i ask how you got Hid's to work with your masked valeos
HID kits do fit straight into the lights, or at least they did on my old Morettes, it's just they're not legal.
Looks really good Graeme. Any more plans? The one thing I'd look to change if it were mine would be the wheels, the ones on it are fine but I think you could do a lot better, something a bit more special could really set it apart and give it a fresh new look for this years shows (assuming you're taking it to the shows anyway).
Something wide and dished with a bit of poke could really beef up the stance, would look tough!
#26: Re: 206T16's Ecosse 206 Virtuel Thread Author: Matt, Posted: Mon Feb 22, 2010 7:13 am ---- this car is stunning!!!
#27: Re: 206T16's Ecosse 206 Virtuel Thread Author: Taff!, Location: Havant nr PortsmouthPosted: Mon Feb 22, 2010 7:23 am ---- That's a nice example of how it should be done.
#28: Re: 206T16's Ecosse 206 Virtuel Thread Author: 206T16, Posted: Mon Feb 22, 2010 7:52 am ----
Ross wrote:
HID kits do fit straight into the lights, or at least they did on my old Morettes, it's just they're not legal.
Looks really good Graeme. Any more plans? The one thing I'd look to change if it were mine would be the wheels, the ones on it are fine but I think you could do a lot better, something a bit more special could really set it apart and give it a fresh new look for this years shows (assuming you're taking it to the shows anyway).
Something wide and dished with a bit of poke could really beef up the stance, would look tough!
HID kits are legal, as long as they are not over the legal brightness.
As for plans, im looking to get some Cobra Misanos or Recaro Sportster CS seats, so hopefully i can get them before the show season starts, although it all depends if Ecosse go to any shows this year. Tbh i dont think big deep dished alloys would suit the Virtuel kit, its just not wide enough to pull them off, if i had the Impact kit then that would be a different story.
#29: Re: 206T16's Ecosse 206 Virtuel Thread Author: coopskin, Location: Hull, East YorkshirePosted: Mon Feb 22, 2010 7:54 am ---- dont suppose you could find out what the brightness on your HID's are could you
#30: Re: 206T16's Ecosse 206 Virtuel Thread Author: Ross, Location: West MidlandsPosted: Mon Feb 22, 2010 8:08 am ----
206T16 wrote:
Ross wrote:
HID kits do fit straight into the lights, or at least they did on my old Morettes, it's just they're not legal.
Looks really good Graeme. Any more plans? The one thing I'd look to change if it were mine would be the wheels, the ones on it are fine but I think you could do a lot better, something a bit more special could really set it apart and give it a fresh new look for this years shows (assuming you're taking it to the shows anyway).
Something wide and dished with a bit of poke could really beef up the stance, would look tough!
HID kits are legal, as long as they are not over the legal brightness.
As for plans, im looking to get some Cobra Misanos or Recaro Sportster CS seats, so hopefully i can get them before the show season starts, although it all depends if Ecosse go to any shows this year. Tbh i dont think big deep dished alloys would suit the Virtuel kit, its just not wide enough to pull them off, if i had the Impact kit then that would be a different story.
Since when? Last I heard you needed headlight washers and auto-levelling headlights which the 206 hasn't got, therefore rendering them illegal. I'm not having a go anyway, I don't care, considering I had them fitted on my old 206 in Morettes and they never caused anyone a problem.
Misano's are lovely, not seen the other seats you mention. I think big deep dished alloys can suit anything, particularly when you've got flared arches like your car has. I just think it could set the car apart.... BobSparkle is one of example of this with his RH rims (pretty sure they were RH anyway!).
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy
Membership:
Latest: 
New Today: 0
New Yesterday: 1
Overall: 17127
Online Now [41]:
Visitors: 40
Members: 0
Staff Online Now:
Page Views:
General
Tiz true what you say though folks, the paint on this thing is pretty damn flawless apart from shipped splitters! Can't help that though! 
just a thought, but a really nice car.
