#1: D's Projcet Show UPDATED PICS ADDED Author: bigdave237, Location: cannockPosted: Thu Feb 18, 2010 10:24 am ---- Hello as you may rember i bought the car for nothing really think it cost me £800 which isnt bad for a 51 plate car with 45,000 on the clock
think the bodykit has something to do with that as it was going rusty where they fitted it using screws then using filler over the top
so the plan was to tidy the car up and use for work and going out, however after seeing priceys old 206 kit up for sale with the smooth boot i got thinking and after a few chats with phil at kolorshack, where i work we decided that we would use the kit i bought from pricey to add to my 206.................... its an on going WIP and i will add pics off all as and when i do it. i recently sold my project clio so i have some reddies to get the project under way
first thing is first is to add pics of the rust etc so you can see what to be aware of when buying a car with a kit on it then stripp it ready for the xodus kit Last edited by bigdave237 on Mon Mar 15, 2010 6:36 am; edited 1 time in total
#2: Re: D's Projcet Show Author: Dabamash, Location: The car in frontPosted: Thu Feb 18, 2010 10:34 am ---- Your car look badass. Ditch the Lexus lights though. Also, get a phase 2 bumper strip, they look more awesome.
#3: Re: D's Projcet Show Author: Quarmbo, Location: Bristol & LeicesterPosted: Thu Feb 18, 2010 10:42 am ---- I remember this car from the forum before it went down!! £800 for that is a very good deal though, and if you have the same colour scheme as Pricey you'll be laughin!
#4: Re: D's Projcet Show Author: Ams1592, Location: West MidlandsPosted: Thu Feb 18, 2010 10:44 am ---- Looking good but unsure on the lexus lights. Get some LED's
#5: Re: D's Projcet Show Author: bigdave237, Location: cannockPosted: Thu Feb 18, 2010 1:57 pm ---- the cars down for a complete overall, ran it up today to find the head has gone so i need that fixing, the lexus lights will be gone and some clear LED's will be put on, unfortunatley i dont want to copy priceys 206 so i have got a different colour scheme dont want to give to much away atm but remeber burnsies 206 from ecosse? im using that colour for the detailing
#6: Re: D's Projcet Show Author: bigdave237, Location: cannockPosted: Tue Feb 23, 2010 8:51 am ---- heres a few pics of the state of the car and unltimatly what i am gonig to do to fix these
rust onder the bonnet etc, will require some fettling with to get back to condition
this is the same both sides where the headlight fits unsure wether we can treat it yet may need new bit on
as the wings are being changed im not worried about this problem
both doors are suffering from this where they have been cuaght rubbed and caused paint to flake ff and leave bare metal = rusttty
skirts will be removed to make way for the kit however need to repair the sills before hand
inside of the car when i bought it looks ok for now wil have some changes including smooth dash
cheap lights result in condensation
being changed for a set of clear LED's
when the previous owner decided to diy the induction kit he decided this was the best option
and finally this is where i need your help i have noticed this cable was just hanging loose and not sure if its the brake servor or what?? help needed on this one
cheers
#7: Re: D's Projcet Show Author: bigdave237, Location: cannockPosted: Wed Mar 10, 2010 2:38 pm ---- today heard from the garage there fitting a new blet etc water pump copper headgasket skimming my alloy head, fixing my brake servo and a service, fitted 2 new sensors a new fan
but all for just under £300
#8: Re: D's Projcet Show Author: Steve., Location: FarehamPosted: Wed Mar 10, 2010 4:04 pm ---- im liking the exhaust, keep it up
#9: Re: D's Projcet Show Author: bigdave237, Location: cannockPosted: Thu Mar 11, 2010 4:08 am ---- My gt bumper arrived today, will look miles better when fitted, orderd a new set of black halo eyes, blakc roof and bonnet, hopefully got my new interior, and phase 2 bootstrip.
#10: Re: D's Projcet Show Author: Brian, Location: VVT Land, FifePosted: Thu Mar 11, 2010 7:16 am ---- Interesting...how's the GT bumper going to tie in with the rest of what ever kit you're choosing to get?
#11: Re: D's Projcet Show Author: bigdave237, Location: cannockPosted: Thu Mar 11, 2010 3:32 pm ---- well atm im thinking of keeping the exsiting kit, basically due to not wanting to rush into an overhaul with priceys old kit then regretting the work and it resulting in me majourly out of pocket.
decided to go for the gt bumper basically because the other bumper to me seemed really rectangle and i think the gt bumper a steal thanks coopskin for showing me where it was on ebay haha, will flow better.
i have also fitted my new optima yellow top battery, and trialed my bootbuild pics added
#12: Re: D's Projcet Show Author: bigdave237, Location: cannockPosted: Mon Mar 15, 2010 6:31 am ---- Today i have started work on seeing how the bumper fits etc, but as im ment to be working hard haha cable ties have started off for now lol, the entire front is not ie headlights bumper badgless grill have not been fitted more placed so i can get a rough idea and i think it looks loads better already i cant wait to fit it all properly
#13: Re: D's Projcet Show UPDATED PICS ADDED Author: Addaz, Location: SuffolkPosted: Mon Mar 15, 2010 6:59 am ---- I wish i had a GT front bumper now
Looking good progress mate
Any ideas for under the bonnet? Maybe just little details here and there?
#14: Re: D's Projcet Show UPDATED PICS ADDED Author: no_offences, Location: LeedsPosted: Mon Mar 15, 2010 7:27 am ---- Good decition on the GT bumper that bodykit is god awful, im liking the arches, you getting rid of the rear bumper?
#15: Re: D's Projcet Show UPDATED PICS ADDED Author: 20619d, Location: barnstaplePosted: Mon Mar 15, 2010 9:26 am ---- front looks kool
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17123
Online Now [44]:
Visitors: 43
Members: 0
Staff Online Now:
Page Views:
General
then using filler over the top
he decided this was the best option 
