#1: torsion bar removal tool Author: charlie-52, Location: telfordPosted: Tue Nov 09, 2010 6:38 pm ---- im in talks with a guy who works with metal he makes a removal tool for the Alfa romeo, so ive asked him about one for a 206 just after how much interest there would be for one, it will work the same way as the 30mm socket .... so would you be interested in one?
they wont be expensive either!! around the 20 pound mark + p&p
#2: Re: torsion bar removal tool Author: NorthantsBen, Location: Raunds, NorthamptonshirePosted: Tue Nov 09, 2010 7:00 pm ---- Wouldn't mind seeing a pic,
#3: Re: torsion bar removal tool Author: Rich196, Posted: Tue Nov 09, 2010 7:21 pm ---- it would work like a 30mm socket, so hes going to make you a 30mm socket is there any point?
#4: Re: torsion bar removal tool Author: charlie-52, Location: telfordPosted: Wed Nov 10, 2010 3:01 am ---- im not totaly sure hes going to send me pictures i gess the part which works as the 30mm socket will be threaded
#5: Re: torsion bar removal tool Author: V9977, Location: Athens, GreecePosted: Wed Nov 10, 2010 4:54 am ---- Interested.
#6: Re: torsion bar removal tool Author: Big_Rich180, Posted: Wed Nov 10, 2010 4:58 am ---- Guess it would be like this cgi.ebay.co.uk/Peugeot...3f049b021d
#7: Re: torsion bar removal tool Author: LilLew, Location: PlymouthPosted: Wed Nov 10, 2010 6:01 am ----
Yep i guess just like that i am gonna invest in one
#8: Re: torsion bar removal tool Author: Seabook, Posted: Wed Nov 10, 2010 7:44 am ---- why do you need that??
#9: Re: torsion bar removal tool Author: Big_Rich180, Posted: Wed Nov 10, 2010 7:46 am ----
Seabook wrote:
why do you need that??
I'd guess its easier than hammering it out.
If it works..
#10: Re: torsion bar removal tool Author: Edward, Location: In the garagePosted: Wed Nov 10, 2010 7:49 am ---- Nothing is easier than using a sledge hammer. Seized torsion bars need brute forced not delicate little tools.
#11: Re: torsion bar removal tool Author: Seabook, Posted: Wed Nov 10, 2010 7:50 am ----
Big_Rich180 wrote:
Seabook wrote:
why do you need that??
I'd guess its easier than hammering it out.
If it works..
Edward wrote:
Nothing is easier than using a sledge hammer. Seized torsion bars need brute forced not delicate little tools.
#12: Re: torsion bar removal tool Author: Big_Rich180, Posted: Wed Nov 10, 2010 7:51 am ----
Seabook wrote:
Big_Rich180 wrote:
Seabook wrote:
why do you need that??
I'd guess its easier than hammering it out.
If it works..
Edward wrote:
Nothing is easier than using a sledge hammer. Seized torsion bars need brute forced not delicate little tools.
Personally i wouldnt bother at all, id get some one else to do it
#13: Re: torsion bar removal tool Author: NorthantsBen, Location: Raunds, NorthamptonshirePosted: Wed Nov 10, 2010 10:54 am ---- True hammer is Easier, tryed the bolt method once and snapped the bolt so never tryed it that way since.
#14: Re: torsion bar removal tool Author: charlie-52, Location: telfordPosted: Thu Nov 11, 2010 3:18 am ---- how about if i had a a very high tensile bar made with an m10 thred on one end a large nut half way down (welded into place) to wind it into the torsion bar and a flat surface on the other end to hit with a BIG hammer, atleast then you wont damge the threads while hitting the torsion bar
#15: Re: torsion bar removal tool Author: NorthantsBen, Location: Raunds, NorthamptonshirePosted: Thu Nov 11, 2010 3:22 am ---- Sounds like a idea, I normally push a smaller bolt into bar and hit on that (if you use right size the head gets disformed and can't get it out)
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17123
Online Now [472]:
Visitors: 471
Members: 0
Staff Online Now:
Page Views:
General
