#76: Re: B47t0n's 2L Intercooled HDI Author: philb121, Location: WrexhamPosted: Sat Jun 19, 2010 11:26 am ----
b47t0n wrote:
have you got bleed valve ?
and he said it should cost £295 but if its on any longer for any reason it should cost £350 most
no i havent, do they need one fitted before the remap
#77: Re: B47t0n's 2L Intercooled HDI Author: b47t0n, Location: sheffieldPosted: Sat Jun 19, 2010 12:27 pm ---- yeah you will need 1 fitting as thats how they adjust the boost he told me on the phone and at FCS
#78: Re: B47t0n's 2L Intercooled HDI Author: philb121, Location: WrexhamPosted: Sat Jun 19, 2010 12:38 pm ---- where did u fit it to, have u got any pics
thanks
#79: Re: B47t0n's 2L Intercooled HDI Author: b47t0n, Location: sheffieldPosted: Sat Jun 19, 2010 12:57 pm ---- it goes to the actuator pipe on turbo
remove the old pipe and put in place the bleed /boost valve
#80: Re: B47t0n's 2L Intercooled HDI Author: LKHtyke, Location: chesterfieldPosted: Sat Jun 19, 2010 1:17 pm ---- Realy Realy nice looking car you have there mate
can i just ask how much the front and rear is lowered by?
is the decatt specificly made up for your exhaust set up or will it fit a std 2.0 HDI exhaust system?
#81: Re: B47t0n's 2L Intercooled HDI Author: philb121, Location: WrexhamPosted: Sat Jun 19, 2010 1:18 pm ---- Thanks alot a great help one last question wat goes on the hose comin from middle of the bleed valve is it for a boost gauge or something
#82: Re: B47t0n's 2L Intercooled HDI Author: b47t0n, Location: sheffieldPosted: Sat Jun 19, 2010 2:35 pm ----
LKHtyke wrote:
Realy Realy nice looking car you have there mate
can i just ask how much the front and rear is lowered by?
is the decatt specificly made up for your exhaust set up or will it fit a std 2.0 HDI exhaust system?
thank you very much
the rear is 70mm and im sure he set the front coilovers to the same height
the decatt is a bolt on bolt off made by exhaust uk
or you could d.i.y it which u just cut the cat off and weld a straight pipe up to it
so yeah it will fit any 206 2.0l hdi
#83: Re: B47t0n's 2L Intercooled HDI Author: b47t0n, Location: sheffieldPosted: Sat Jun 19, 2010 2:37 pm ----
philb121 wrote:
Thanks alot a great help one last question wat goes on the hose comin from middle of the bleed valve is it for a boost gauge or something
no worries pal happy to help if i can
the middle hose just dangles doesn't go to anything as thats where it bleeds from
#84: Re: B47t0n's 2L Intercooled HDI Author: philb121, Location: WrexhamPosted: Sat Jun 19, 2010 2:43 pm ---- ok thanks you will have to let us all know how the remap goes.
#85: Re: B47t0n's 2L Intercooled HDI Author: b47t0n, Location: sheffieldPosted: Sat Jun 19, 2010 2:51 pm ---- will do pal cannot wait all i want to do is hit that 150bhp mark
#86: Re: B47t0n's 2L Intercooled HDI Author: b47t0n, Location: sheffieldPosted: Mon Jun 21, 2010 1:05 pm ---- my engine in its horrible currant state
Just a little update now fitted boost valve currently running at 1bar 14.5 psi
and now bucked in at rs-tunning in leeds for 10th july full remapp
hehe..... i run 1.1bar as standard. am upping to 1.4 bar when my boost valve arrives and have ic plumbed in..... then its the massive save for the remap lol.....
#88: Re: B47t0n's 2L Intercooled HDI Author: b47t0n, Location: sheffieldPosted: Tue Jun 22, 2010 11:30 am ---- mine seems to spike at anything over 1.1 :S
#89: Re: B47t0n's 2L Intercooled HDI Author: Teebag, Location: exhall, bedworth, coventryPosted: Tue Jun 22, 2010 4:58 pm ---- max mine can safely run with no mods is 1.4....
dont forget the turbos in the 2.0 and 1.4 are completely different lol. my baby turbo runs crazy boost lol.
#90: Re: B47t0n's 2L Intercooled HDI Author: Teebag, Location: exhall, bedworth, coventryPosted: Fri Jul 02, 2010 6:10 am ---- mate. u had any issues with lag? just plumbed mine in and there's a noticeable increase in lag but once past that it chuffin flys lol.
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy