#1: Sighh, so much for that! Author: EDP407, Location: Melksham, WiltshirePosted: Sun Dec 19, 2010 5:22 am ---- After my last thread about how great my 306 is and how pleased I am with it, I start it up this morning and something is wrong.
ABS light is displayed and the car won't go any faster than 20mph and when I rev it it revs really slowly and no higher than 2000rpm.
Perhaps I have to rethink the new car situation again...
#2: Re: Sighh, so much for that! Author: kieron, Location: in the housePosted: Sun Dec 19, 2010 5:37 am ---- has it gone into limp mode?
#3: Re: Sighh, so much for that! Author: Andrew, Location: Black Country Ay IPosted: Sun Dec 19, 2010 5:47 am ---- That car seems to give you real trouble by the sounds
Time for a 206?
#4: Re: Sighh, so much for that! Author: EDP407, Location: Melksham, WiltshirePosted: Sun Dec 19, 2010 5:50 am ----
Andrewxps wrote:
That car seems to give you real trouble by the sounds
Time for a 206?
to be honest I am seriously considering it. Been looking at 307's etc but hear horror stories about them as well. I had a 206 for my first car, a Flamenco red 52 plate 1.4 and was sound. Gonna have a look through autotrader now because u can pick em up for tuppence now
#5: Re: Sighh, so much for that! Author: EDP407, Location: Melksham, WiltshirePosted: Sun Dec 19, 2010 5:57 am ---- www.autotrader.co.uk/c...ogcode=flp
one i have my eye on
#6: Re: Sighh, so much for that! Author: Lecktorious, Location: ScotlandPosted: Sun Dec 19, 2010 6:00 am ---- Its gone into limp mode. Have you tried starting it again since?
Snow tends to wreck havoc with ABS on some cars in the snow.
#7: Re: Sighh, so much for that! Author: MrBSI, Location: What's it to you? ? ?Posted: Sun Dec 19, 2010 6:03 am ---- Later 306's ABS should be able to flash out a fault code with the dash light if it's the Bosch 2E ABS system fitted
#8: Re: Sighh, so much for that! Author: EDP407, Location: Melksham, WiltshirePosted: Sun Dec 19, 2010 6:06 am ----
MrBSI wrote:
Later 306's ABS should be able to flash out a fault code with the dash light if it's the Bosch 2E ABS system fitted
this means jibberish to me!!
#9: Re: Sighh, so much for that! Author: EDP407, Location: Melksham, WiltshirePosted: Sun Dec 19, 2010 6:08 am ----
G. wrote:
Its gone into limp mode. Have you tried starting it again since?
Snow tends to wreck havoc with ABS on some cars in the snow.
I haven't yet no, a friend told me the same thing so I have put in my Mum's garage and whacked the heat up in there to let it thore out
#10: Re: Sighh, so much for that! Author: Lecktorious, Location: ScotlandPosted: Sun Dec 19, 2010 6:18 am ---- Try starting it up again. My 206 has kicked into limp mode before, cleared itself when I took the key out the ignition and restarted it.
#11: Re: Sighh, so much for that! Author: EDP407, Location: Melksham, WiltshirePosted: Sun Dec 19, 2010 6:42 am ----
G. wrote:
Try starting it up again. My 206 has kicked into limp mode before, cleared itself when I took the key out the ignition and restarted it.
gave that shot, also disconnected and reconnected the battery and its worked! Thanks.
ABS light is still on but its not in limp mdoe anymore, I will give it another try in a few hours when the ice is melted. Got 2 heaters on full blast and a tumble dryer on in their so should get nice and toasty soon
#12: Re: Sighh, so much for that! Author: MrBSI, Location: What's it to you? ? ?Posted: Sun Dec 19, 2010 6:45 am ---- Are the brake lights working correctly?
I know older Pugs if the brake light bulbs have failed the ABS warning light will come on during the pre start check.
#13: Re: Sighh, so much for that! Author: EDP407, Location: Melksham, WiltshirePosted: Sun Dec 19, 2010 6:54 am ----
MrBSI wrote:
Are the brake lights working correctly?
I know older Pugs if the brake light bulbs have failed the ABS warning light will come on during the pre start check.
yeh they work fine, the ABS light comes on before start up all the time on the later model 306's like mine
#14: Re: Sighh, so much for that! Author: MrBSI, Location: What's it to you? ? ?Posted: Sun Dec 19, 2010 6:58 am ----
EDP407 wrote:
MrBSI wrote:
Are the brake lights working correctly?
I know older Pugs if the brake light bulbs have failed the ABS warning light will come on during the pre start check.
yeh they work fine, the ABS light comes on before start up all the time on the later model 306's like mine
ABS light should come on for around 5 seconds during pre start check then go out.
#15: Re: Sighh, so much for that! Author: EDP407, Location: Melksham, WiltshirePosted: Sun Dec 19, 2010 7:39 am ----
MrBSI wrote:
EDP407 wrote:
MrBSI wrote:
Are the brake lights working correctly?
I know older Pugs if the brake light bulbs have failed the ABS warning light will come on during the pre start check.
yeh they work fine, the ABS light comes on before start up all the time on the later model 306's like mine
ABS light should come on for around 5 seconds during pre start check then go out.
yep thats what it normally does. Stays on constantly at the moment though.
#16: Re: Sighh, so much for that! Author: MrBSI, Location: What's it to you? ? ?Posted: Sun Dec 19, 2010 7:55 am ---- Have a look under the bonnet for the ABS unit.
If its a Bosch one find the 10 digit ID number & post it up.
It will look something like X XXX XXX XXX
If it turns out to be the Bosch 2E system you can easily flash out the fault codes with the ABS dash warning light
#17: Re: Sighh, so much for that! Author: EDP407, Location: Melksham, WiltshirePosted: Sun Dec 19, 2010 8:30 am ----
MrBSI wrote:
Have a look under the bonnet for the ABS unit.
If its a Bosch one find the 10 digit ID number & post it up.
It will look something like X XXX XXX XXX
If it turns out to be the Bosch 2E system you can easily flash out the fault codes with the ABS dash warning light
does it look like this? This si the only bosche thing i could see
It says:
Bosche 515
Code: 0 445 010 046
#18: Re: Sighh, so much for that! Author: EDP407, Location: Melksham, WiltshirePosted: Sun Dec 19, 2010 9:35 am ---- Wise, kind people of 206info.co.uk I thank you for all your help once again! The problem is resolved. Thanks MrBSI for all your help, and "G."
Problem fixed by just melting away the snow that must have been blocking the ABS sensor
#19: Re: Sighh, so much for that! Author: Lecktorious, Location: ScotlandPosted: Sun Dec 19, 2010 10:32 am ---- Snow trapped around the driveshaft?
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17126
Online Now [62]:
Visitors: 61
Members: 0
Staff Online Now:
Page Views:
General
