#16: Re: Average price for rear bearing? Author: Seabook, Posted: Tue Mar 29, 2011 1:07 pm ---- one arm off already, easier than i though, and definitely easier than do the torsion bar
#17: Re: Average price for rear bearing? Author: mcfly666, Location: DevonPosted: Tue Mar 29, 2011 5:11 pm ---- near side is easier, if i have a car parked next to me tommorow im fooked as i wont be able to get the arb out lol
Oh can anyone tell me what size bolt you need to get the arb plate out (if you know what i mean, the triangle shaped plate attached to the swing arm? Last edited by mcfly666 on Tue Mar 29, 2011 5:20 pm; edited 1 time in total
#18: Re: Average price for rear bearing? Author: Seabook, Posted: Tue Mar 29, 2011 5:19 pm ----
mcfly666 wrote:
near side is easier, if i have a car parked next to me tommorow im fooked as i wont be able to get the arb out lol
just the same to me
as the axle is not on the car atm
i think i might give it a polish before i put it on
#19: Re: Average price for rear bearing? Author: mcfly666, Location: DevonPosted: Tue Mar 29, 2011 5:21 pm ---- Yeah and loads of grease matie! I put a bit extra on my post above me, any help would be handy
#20: Re: Average price for rear bearing? Author: Steve206, Location: UKPosted: Wed Mar 30, 2011 5:39 am ----
mcfly666 wrote:
near side is easier, if i have a car parked next to me tommorow im fooked as i wont be able to get the arb out lol
Oh can anyone tell me what size bolt you need to get the arb plate out (if you know what i mean, the triangle shaped plate attached to the swing arm?
If you have rear discs, use a bolt from the caliber, if not you could try a front caliper bolt.
#21: Re: Average price for rear bearing? Author: Seabook, Posted: Wed Mar 30, 2011 5:58 am ----
mcfly666 wrote:
Yeah and loads of grease matie! I put a bit extra on my post above me, any help would be handy
M12 1.5thread bolt
#22: Re: Average price for rear bearing? Author: mcfly666, Location: DevonPosted: Wed Mar 30, 2011 9:52 am ---- thanks guys, got a M12 from bnq and it fitted (blind luck) job is done now, stub pin wasnt too bad after a good sand and wire brushing with a dremel. hardes part was banging the bearing in, the torsion bar would not move so I had to free it up from the other side and do the work on the trailing arm with the torsion bar fapping around :/
Who knows how long it will last:P
#23: Re: Average price for rear bearing? Author: Seabook, Posted: Wed Mar 30, 2011 4:14 pm ---- how did you bang in the bearing?
i am still removing the left overbit inside the trailing arm lol
i was considering to pay the garage to press the bearing in for me lol
#24: Re: Average price for rear bearing? Author: mcfly666, Location: DevonPosted: Thu Mar 31, 2011 12:17 pm ---- Banged the inside bearing in with a piece of wood (it has a lip on it) the outer bearing I banged in with wood untill flush and finished it of with a piece of 52/51mm bar, it sits inside the trailing arm about 1/4 of an inch.
#25: Re: Average price for rear bearing? Author: Steve206, Location: UKPosted: Thu Mar 31, 2011 2:24 pm ---- Anyone got any pics of what theyve been doing?
#26: Re: Average price for rear bearing? Author: mcfly666, Location: DevonPosted: Sat Apr 02, 2011 7:29 am ---- I dont steve, my job is all finished There is a guide on youtube which might help you (I posted near the start of the thread)
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17126
Online Now [59]:
Visitors: 58
Members: 0
Staff Online Now:
Page Views:
General
There is a guide on youtube which might help you (I posted near the start of the thread)
