#1: Engine continues to run.... Author: nicholad, Location: CambridgshirePosted: Thu Mar 31, 2011 5:25 am ---- I have noticed that when I park up and turn the engine off and remove the key the engine is still running. It doesn't happen everytime but when it does happen it the engine continues to run for a few seconds and then switches off. What is this - is it going to lead to a bigger problem. Many thanks for your advice N
#2: Re: Engine continues to run.... Author: kieron, Location: in the housePosted: Thu Mar 31, 2011 5:36 am ---- is it the dw8 1.9 engine?
#3: Re: Engine continues to run.... Author: Rob2859, Location: HalifaxPosted: Thu Mar 31, 2011 5:45 am ---- fuel cut off solenoid. Don't know where it is located
#4: Re: Engine continues to run.... Author: cartoonhead, Location: North ManchesterPosted: Thu Mar 31, 2011 6:00 am ----
Rob2859 wrote:
fuel cut off solenoid. Don't know where it is located
normaly on the pump.
#5: Re: Engine continues to run.... Author: Rob2859, Location: HalifaxPosted: Thu Mar 31, 2011 6:18 am ---- Its strange I had that problem a few times but then it was fine after. I think it got water logged.
#6: Re: Engine continues to run.... Author: MrBSI, Location: What's it to you? ? ?Posted: Thu Mar 31, 2011 6:20 am ---- Wrong bulb in the rear cluster for stop / tail can cause ignition faults
1.4 GLX in profile, its gonna be a TU3 lump.
#7: Re: Engine continues to run.... Author: Debbie22, Location: TamworthPosted: Thu Mar 31, 2011 8:07 am ---- that happened to my 306 and turned out it was head gasket :/
#8: Re: Engine continues to run.... Author: Lee, Location: EnglandPosted: Thu Mar 31, 2011 8:32 am ----
MrBSI wrote:
Wrong bulb in the rear cluster for stop / tail can cause ignition faults
1.4 GLX in profile, its gonna be a TU3 lump.
Send +12v down the side light wire and the ignition comes on
#9: Re: Engine continues to run.... Author: MrBSI, Location: What's it to you? ? ?Posted: Thu Mar 31, 2011 8:36 am ----
Lee wrote:
MrBSI wrote:
Wrong bulb in the rear cluster for stop / tail can cause ignition faults
1.4 GLX in profile, its gonna be a TU3 lump.
Send +12v down the side light wire and the ignition comes on
Originally found out by Ricky / Porndog all those years ago
#10: Re: Engine continues to run.... Author: nicholad, Location: CambridgshirePosted: Thu Mar 31, 2011 9:14 am ---- Thanks for your replies - my car is indeed a 1.4 GLX. You mentioned a light bulb? I did have a rear light out a couple of weeks ago and the bulb was replaced - could the engine running fault be down to that then? Also I have noticed when I drive in the dark my tail light is permenantly on too.....
#11: Re: Engine continues to run.... Author: MrBSI, Location: What's it to you? ? ?Posted: Thu Mar 31, 2011 9:19 am ----
nicholad wrote:
Thanks for your replies - my car is indeed a 1.4 GLX. You mentioned a light bulb? I did have a rear light out a couple of weeks ago and the bulb was replaced - could the engine running fault be down to that then? Also I have noticed when I drive in the dark my tail light is permenantly on too.....
Bingo
Make sure the stop / tail bulb is the correct twin filiment 5w21 type & its fitted the correct way round.
#12: Re: Engine continues to run.... Author: Didz, Location: UK, Isle of ManPosted: Thu Mar 31, 2011 9:54 am ---- gotta love an easy fix
on the leci tricks, if you turn the hazard switch round in a nova 14sri you can bump the car and it runs
#13: Re: Engine continues to run.... Author: MrBSI, Location: What's it to you? ? ?Posted: Thu Mar 31, 2011 9:59 am ----
Didz wrote:
on the leci tricks, if you turn the hazard switch round in a nova 14sri you can bump the car and it runs
Thats old school Vauxhall.
There is a similar one for the first generation Vectra but I aint posting it up on a public forum
Reminds me of the first generation Peugeot / Citroen alarm & immobiliser system, that was so easy to bypass in seconds
#14: Re: Engine continues to run.... Author: mdstone, Location: South WalesPosted: Thu Mar 31, 2011 1:21 pm ----
Lee wrote:
MrBSI wrote:
Wrong bulb in the rear cluster for stop / tail can cause ignition faults
1.4 GLX in profile, its gonna be a TU3 lump.
Send +12v down the side light wire and the ignition comes on
Does this mean we can all go and hotwire a 206?
#15: Re: Engine continues to run.... Author: pug206lx, Location: Taking a gearbox off somewherePosted: Thu Mar 31, 2011 1:25 pm ----
mdstone wrote:
Lee wrote:
MrBSI wrote:
Wrong bulb in the rear cluster for stop / tail can cause ignition faults
1.4 GLX in profile, its gonna be a TU3 lump.
Send +12v down the side light wire and the ignition comes on
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17128
Online Now [232]:
Visitors: 231
Members: 0
Staff Online Now:
Page Views:
General
