#1: Stealies to Alloys. Author: LeeThr, Location: North West WalesPosted: Wed Apr 13, 2011 6:49 pm ---- Right, bought some XSI alloys for my 1.4 LX earlier. Went to fit them tonight, and they seem rather snug to get on. the bolt holes line up as they should. Just the centre caps dont quite fit on like the stealies did. Got them on in the end. However tightened the bolts up went for a quick drive and checked them again, they tightened up again. Went for a longer drive and they stayed tightish but I still got a bit more turn on them. I used the bolts that came with the stealies, do i need some different ones? Anybody else done this? Will the fit properly?
Lee
#2: Re: Stealies to Alloys. Author: ukskater01, Location: sutton surrey/welwyn garden cityPosted: Wed Apr 13, 2011 11:23 pm ---- You need alloy bolts I think! Something like mcguard locking nuts
#3: Re: Stealies to Alloys. Author: cartoonhead, Location: North ManchesterPosted: Thu Apr 14, 2011 2:04 am ---- not the clearest pic but you need these
steelies bolt's will probably end up just ripping thru the alloy
thats a set i dont use if your interested
#4: Re: Stealies to Alloys. Author: MrBSI, Location: What's it to you? ? ?Posted: Thu Apr 14, 2011 3:40 am ----
LeeThr wrote:
I used the bolts that came with the stealies, do i need some different ones?
You MUST not use steel wheel bolts on alloy wheels!
Get the correct alloy wheels bolts fitted ASAP / stop driving the car / put the steel wheels back on till you have the correct alloy bolts for the alloy wheels!
#5: Re: Stealies to Alloys. Author: LeeThr, Location: North West WalesPosted: Thu Apr 14, 2011 4:08 am ----
MrBSI wrote:
LeeThr wrote:
I used the bolts that came with the stealies, do i need some different ones?
You MUST not use steel wheel bolts on alloy wheels!
Get the correct alloy wheels bolts fitted ASAP / stop driving the car / put the steel wheels back on till you have the correct alloy bolts for the alloy wheels!
The stealies will be back on as soon as i get back to them.
#6: Re: Stealies to Alloys. Author: LeeThr, Location: North West WalesPosted: Thu Apr 14, 2011 5:43 pm ---- Right, quick update, back on the stealies for now. The fronts where okish, seemed a bit snug on the centre caps but came off with very little force needed. However the rears where very snug. Had to give them a good quick from behind to get them off. Does anybody know whats up? Anybody else done put XSI alloys on a 1.4 LX? How snug where they or wernt they?
#7: Re: Stealies to Alloys. Author: Antknee, Location: ManchesterPosted: Thu Apr 14, 2011 6:01 pm ---- can put any alloys of any 206 onto any other 206, just make sure you have the right bolts
#8: Re: Stealies to Alloys. Author: LeeThr, Location: North West WalesPosted: Thu Apr 14, 2011 6:08 pm ---- I know in theory they should fit. They did seem to-ish. Just like I said where the centre caps sit was a lot more snug than the stealies, the stealies with a tiny bit of effort you can move them around a bit if the stud holes dont quite line up. However the alloys once there sat on the centre caps will not budge watsoever.
#9: Re: Stealies to Alloys. Author: ukskater01, Location: sutton surrey/welwyn garden cityPosted: Fri Apr 15, 2011 12:47 am ---- They may have been snug but the steel bolts could of worked there way out or even snapped, better to be safe than sorry
#10: Re: Stealies to Alloys. Author: LeeThr, Location: North West WalesPosted: Fri Apr 15, 2011 10:33 am ----
ukskater01 wrote:
They may have been snug but the steel bolts could of worked there way out or even snapped, better to be safe than sorry
I know that, the alloys are now sat in the garage untill I get the correct bolts. I just want to know why the centre caps on the alloys where the meet the hubs are so snug. Are they all like this?
#11: Re: Stealies to Alloys. Author: ukskater01, Location: sutton surrey/welwyn garden cityPosted: Fri Apr 15, 2011 11:15 am ---- Oh sorry! I'm afraid I'm not sure as I haven't taken my alloys off yet, I'm sure someone else will be able to answer this
cheers
#12: Re: Stealies to Alloys. Author: Antknee, Location: ManchesterPosted: Fri Apr 15, 2011 11:17 am ---- probably just a slightly smaller centre bore on the alloys
#13: Re: Stealies to Alloys. Author: Seabook, Posted: Fri Apr 15, 2011 11:19 am ---- no, they should be quite tight fit
#14: Re: Stealies to Alloys. Author: LeeThr, Location: North West WalesPosted: Fri Apr 15, 2011 11:20 am ----
Seabook wrote:
no, they should be quite tight fit
As in that tight they wont even spin on the centre caps?
#15: Re: Stealies to Alloys. Author: Antknee, Location: ManchesterPosted: Fri Apr 15, 2011 11:22 am ----
LeeThr wrote:
Seabook wrote:
no, they should be quite tight fit
As in that tight they wont even spin on the centre caps?
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17123
Online Now [56]:
Visitors: 55
Members: 0
Staff Online Now:
Page Views:
General
