#1: removing this engine mount?? Author: NorthantsBen, Location: Raunds, NorthamptonshirePosted: Sat Apr 23, 2011 1:08 pm ---- how does it come off, my old cars one was just a nut and haynes only shows a nut too, but this one has a rubber thing on top
there is a nut under the rubber thing but cant get spanner on it
i have tried pulling rubber thing off but no joy
ben, Last edited by NorthantsBen on Sat Apr 23, 2011 1:15 pm; edited 1 time in total
#2: Re: removing this engine mount?? Author: cartoonhead, Location: North ManchesterPosted: Sat Apr 23, 2011 1:10 pm ---- that needs a 32mm socket or similar
#3: Re: removing this engine mount?? Author: NorthantsBen, Location: Raunds, NorthamptonshirePosted: Sat Apr 23, 2011 1:34 pm ----
cartoonhead wrote:
that needs a 32mm socket or similar
come again?
looks like a bit of round rubber there is a 16or13mm nut under it ??
#4: Re: removing this engine mount?? Author: XSIcheeseman, Location: OrpingtonPosted: Sat Apr 23, 2011 1:50 pm ---- get the rubber bit off the top . l mine was in two bits when i removed it lol i thinks its like a 16 or 17mm but cant really remember , i just airguned it off ( as it was f****d) then screwdriver on the side of hte metal mount' hit it with a hammer so that its un screws .. take it off screw the new one on handtight . put the rest of the mounts back on and tight up with a snap bar .. thats how i done mine at college with my teacher
#5: Re: removing this engine mount?? Author: cartoonhead, Location: North ManchesterPosted: Sat Apr 23, 2011 2:02 pm ---- its just a 32mm nut with a bit of rubber on so if you push down on a 33mm socket it will go on and undo it.
feels like its gonna slip/round off the nut but it will grip it enough to undo it.
that nut goes from the rubber to the base which is the threaded nut
#6: Re: removing this engine mount?? Author: NorthantsBen, Location: Raunds, NorthamptonshirePosted: Sat Apr 23, 2011 2:14 pm ----
cartoonhead wrote:
its just a 32mm nut with a bit of rubber on so if you push down on a 33mm socket it will go on and undo it.
feels like its gonna slip/round off the nut but it will grip it enough to undo it.
that nut goes from the rubber to the base which is the threaded nut
nice one, i got a 32mm that i use for the driveshafts and rear hubs so will smack that on
couldnt see this in the haynes tho lol
or was on my last car
#7: Re: removing this engine mount?? Author: NorthantsBen, Location: Raunds, NorthamptonshirePosted: Sun Apr 24, 2011 9:10 am ---- Tried what u said but it just spins
#8: Re: removing this engine mount?? Author: MrBSI, Location: What's it to you? ? ?Posted: Sun Apr 24, 2011 9:19 am ---- That rubber thing has a M10 threaded metal insert inside it, you really need to grip it tightly to get it to start to undo.
You might end up destroying it on removal.
#9: Re: removing this engine mount?? Author: NorthantsBen, Location: Raunds, NorthamptonshirePosted: Sun Apr 24, 2011 9:23 am ---- Thanks I ripped the top off it trying lol,
Will get some mole grips on it and try again
Thanks
#10: Re: removing this engine mount?? Author: MrBSI, Location: What's it to you? ? ?Posted: Sun Apr 24, 2011 9:25 am ---- You removing the complete engine mount?
Hope you have the special Peugeot tool
Hammer & decent punch works if your carefull with your aim
#11: Re: removing this engine mount?? Author: NorthantsBen, Location: Raunds, NorthamptonshirePosted: Sun Apr 24, 2011 9:30 am ---- Well yer trying to,
Why is it this rubber thing is not in the Haynes and when I too it out my last car it was just a nut and took 2mins lol
#12: Re: removing this engine mount?? Author: MrBSI, Location: What's it to you? ? ?Posted: Sun Apr 24, 2011 9:34 am ----
NorthantsBen wrote:
Why is it this rubber thing is not in the Haynes and when I too it out my last car it was just a nut and took 2mins lol
Rubber thing isnt fitted on all 206's, just some of them
#13: Re: removing this engine mount?? Author: XSIcheeseman, Location: OrpingtonPosted: Sun Apr 24, 2011 10:01 am ---- Air gun it! If your removing it then dont matter if you reck it lol i done it at college air gun the nut off , hammer and screwdriver bang to unscrew it and screw the new one on
#14: Re: removing this engine mount?? Author: NorthantsBen, Location: Raunds, NorthamptonshirePosted: Sun Apr 24, 2011 10:06 am ---- Lol I have snapon air gun but next door compressor don't reach car lol
#15: Re: removing this engine mount?? Author: Antknee, Location: ManchesterPosted: Tue Apr 26, 2011 10:12 am ---- out of curiosity im getting quote a bit of a rattle when starting the car up and this engine mount has a gap either side of it between there the bolt is and the rubber things on either side (buffers?), would that cause a loud rattling or is there supposed to be about a 5mm gap either side? because that's how it is on mine atm
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy
Membership:
Latest: 
New Today: 0
New Yesterday: 1
Overall: 17128
Online Now [57]:
Visitors: 56
Members: 0
Staff Online Now:
Page Views:
General
