#16: Re: Help me with my diag readout. Author: Rob2859, Location: HalifaxPosted: Tue Jun 28, 2011 9:46 am ---- They found nothing apart from a badly wired up 02 sensor. They were getting many errors including intermittent ECU fault, a number of injector errors, Knock sensor error and other but I can't remember what he said. Not been to pick the car up yet. The car then stopped giving errors like it did with me before. He said the BSI is probably had it.
#17: Re: Help me with my diag readout. Author: Lee, Location: EnglandPosted: Tue Jun 28, 2011 9:56 am ---- You're non-plexed right?
Very rare for a non-plexed bsi to just go if you haven't been tampering with it
#18: Re: Help me with my diag readout. Author: Rob2859, Location: HalifaxPosted: Tue Jun 28, 2011 10:06 am ---- Thats right. Well what do you think lee? I have tried everything.
#19: Re: Help me with my diag readout. Author: Lee, Location: EnglandPosted: Tue Jun 28, 2011 10:16 am ---- Just seems strange that all the faults are in the engine ECU but yet they are saying its the BSI
What they scanning it with?
#20: Re: Help me with my diag readout. Author: Rob2859, Location: HalifaxPosted: Tue Jun 28, 2011 10:30 am ---- I don't know tbh. He said BSI maybe he was mistaken? What control does the BSI actually have over the ECU?
#21: Re: Help me with my diag readout. Author: Lee, Location: EnglandPosted: Tue Jun 28, 2011 10:34 am ---- The BSI contains the IMMO and that's it.
#22: Re: Help me with my diag readout. Author: namgaj, Location: Chasing Ash, Addaz and Lee........... hopefully catching Addaz and havin fun :PPosted: Tue Jun 28, 2011 10:42 am ---- Its f****d!
#23: Re: Help me with my diag readout. Author: MrBSI, Location: What's it to you? ? ?Posted: Tue Jun 28, 2011 10:45 am ---- Has it been scanned with Peugeot Planet?
If the garage reckon the BSI unit is defective id be tempted to speak to BBA & send them both the engine ecu & the BSI unit for testing / quote to repair.
#24: Re: Help me with my diag readout. Author: Lee, Location: EnglandPosted: Tue Jun 28, 2011 10:50 am ---- If the BSI only controls the IMMO in the car then it should be fine, as the IMMO is working otherwise the car wouldn't start and they wouldn't be able to access the engine ECU.
If it's only engine based things at fault then it will either be some sensor/s or the engine ECU
#25: Re: Help me with my diag readout. Author: Rob2859, Location: HalifaxPosted: Tue Jun 28, 2011 10:52 am ----
namgaj wrote:
Its f****d!
Than you for that useful diagnosis
Maybe he was mistaken and was talking about the ECU, he didn't really sound like he know what he was doing tbh. Will have to call again tomorrow. I might send the ECU off. How much to BBA charge? I can get hold of a band new ECU for £100, not sure if its blank or just needs coding.
#26: Re: Help me with my diag readout. Author: MrBSI, Location: What's it to you? ? ?Posted: Tue Jun 28, 2011 10:53 am ---- Wonder if the engine ecu connectors are still covered in the w**ky silicone grease Peugeot used on the production line
Might be worth spraying some electrical contact cleaner spray on the connectors.
#27: Re: Help me with my diag readout. Author: Lee, Location: EnglandPosted: Tue Jun 28, 2011 10:54 am ---- New ECU needs to be unlocked or come with the matching BSI and transponder
#28: Re: Help me with my diag readout. Author: Rob2859, Location: HalifaxPosted: Tue Jun 28, 2011 10:55 am ----
Lee wrote:
If the BSI only controls the IMMO in the car then it should be fine, as the IMMO is working otherwise the car wouldn't start and they wouldn't be able to access the engine ECU.
If it's only engine based things at fault then it will either be some sensor/s or the engine ECU
A dodgy battery spazzed me electrics and blew my windows and central locking but I do not think its related as it was already on 2 cylinders. Not bothered trying to fix those yet.
#29: Re: Help me with my diag readout. Author: Rob2859, Location: HalifaxPosted: Tue Jun 28, 2011 11:07 am ----
Lee wrote:
New ECU needs to be unlocked or come with the matching BSI and transponder
How much is unlocking? The one i can get is from a pre-plexed i suppose it different though?
#30: Re: Help me with my diag readout. Author: Lee, Location: EnglandPosted: Tue Jun 28, 2011 11:10 am ---- Is it currently on a car that will start?
If so, then I'll tell you how to unlock it for free
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17128
Online Now [144]:
Visitors: 143
Members: 0
Staff Online Now:
Page Views:
General
