#1: Car not putting the power down (catching up to revs) Author: Mod4hire, Location: HampshirePosted: Fri Jul 08, 2011 11:27 am ---- Hi all,
Car (1.6 16v Xsi 2001)
For this kind of a problem I thought it was the clutch, so last weekend I had the whole thing replaced with the OEM version. Seemed fine driving it back etc... But gave it its first real drive last night. Now the mechanic that did the job is a family friend, been a mechanic for nearly 30 years and he said the clutch he removed was pretty knackered, which doesn't suprise me as the car had a pretty neglectfull 100,000k life before I owned it the last 5000k. Since then I've had a full cam belt kit on, fully serviced it, sparks super 4's of course, front and rear brakes needed replacing, same goes with the front discs. It has needed a lot of work since I've owned it, but I love the car and don't mind the odd bit going here and there, but now I'm stuck with what could be wrong with it now. The revs far exceed what the car should be putting down, as an example when I tested for the problem yesterday, I took the car in 2nd up to 5000 revs and it was struggling to catch up to 40 on the clock, eventually the car caught up and the car was matching the revs.
Can anyone advise me here please?
Thanks in advance
#2: Re: Car not putting the power down (catching up to revs) Author: Seabook, Posted: Fri Jul 08, 2011 11:42 am ---- oil on the clutch?
#3: Re: Car not putting the power down (catching up to revs) Author: MrZiggerz, Location: Milton KeynesPosted: Fri Jul 08, 2011 11:45 am ---- Slipping clutch. Like Seabrook said.
#4: Re: Car not putting the power down (catching up to revs) Author: Mod4hire, Location: HampshirePosted: Fri Jul 08, 2011 11:49 am ---- Its just had a new one a week ago, how can it be slipping?
#5: Re: Car not putting the power down (catching up to revs) Author: macj, Location: EssexPosted: Fri Jul 08, 2011 11:50 am ---- What was the flywheel face like.
Had one in with the friction/drive plate in the wrong way round Last edited by macj on Fri Jul 08, 2011 11:52 am; edited 1 time in total
#6: Re: Car not putting the power down (catching up to revs) Author: MrZiggerz, Location: Milton KeynesPosted: Fri Jul 08, 2011 11:51 am ---- Ask your family friend who did it, cause that's what it sounds like to me.
#7: Re: Car not putting the power down (catching up to revs) Author: E5GDM, Location: EssexPosted: Fri Jul 08, 2011 11:53 am ---- Is the clutch cable adusted correctly?
#8: Re: Car not putting the power down (catching up to revs) Author: Mod4hire, Location: HampshirePosted: Fri Jul 08, 2011 12:05 pm ---- Don't think the cable would be an issue, its a hydrolic clutch? Not sure on the fly wheel, I've left a message with him, when he gets back to me I shall enquire the above
#9: Re: Car not putting the power down (catching up to revs) Author: mjsroofing, Location: south walesPosted: Fri Jul 08, 2011 1:02 pm ---- clutch problem somewhere,
#10: Re: Car not putting the power down (catching up to revs) Author: -Dave-, Location: North ManchesterPosted: Fri Jul 08, 2011 1:25 pm ----
mjsroofing wrote:
clutch problem somewhere,
I think that had been established
#11: Re: Car not putting the power down (catching up to revs) Author: Howey, Location: Kings LynnPosted: Fri Jul 08, 2011 1:50 pm ----
Suicidalsoldi3r wrote:
mjsroofing wrote:
clutch problem somewhere,
I think that had been established
#12: Re: Car not putting the power down (catching up to revs) Author: Mattie-RS, Location: A Track near you ;)Posted: Fri Jul 08, 2011 2:47 pm ----
Suicidalsoldi3r wrote:
mjsroofing wrote:
clutch problem somewhere,
I think that had been established
Is it a clutch problem?
#13: Re: Car not putting the power down (catching up to revs) Author: Mod4hire, Location: HampshirePosted: Sun Aug 14, 2011 6:14 am ---- Been a while since I posted this, but the problem has only just been solved. A full clutch kit was fitted all was well, but the slave cylinder went shortly after the new kit was fitted causing slip, which in turn burnt the clutch a little. But because I know the guy he straight swapped it (with a story) for a valeo one and fitted a new slave cylinder along side the valeo, all is well now the cars driving great
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17121
Online Now [305]:
Visitors: 304
Members: 0
Staff Online Now:
Page Views:
General
