#16: Re: My Black 206 Project! Author: MrBSI, Location: What's it to you? ? ?Posted: Wed Aug 31, 2011 5:20 am ----
Rob2859 wrote:
you can find the paint code on the inside of the door
I reckon being an early 206 that the white info sticker will be on the passenger side suspension strut tower under the bonnet.
#17: Re: My Black 206 Project! Author: MrBSI, Location: What's it to you? ? ?Posted: Wed Aug 31, 2011 5:24 am ----
Reflekt. wrote:
Thanks for the comments guys. Ive got my eye on some ph2 front lights that end tomorrow on ebay so time will tell.
You will also need a non plexed GTI / double optic headlamp stalk to make crystal headlamps work correctly.
You MAY be lucky & find the grey 3 pin headlamp connectors already tucked up behind the headlamps ready & waiting, if not then you also need to order the following parts from your local Peugeot / Citroen main dealer.
Grey H7 connector 6541 J6 £2.30 elec clip holder & you need 2.
Pin for the connector 6541 E6 £0.53 Harness clip & you need 6.
#18: Re: My Black 206 Project! Author: rick-gti, Location: welshpool, mid walesPosted: Wed Aug 31, 2011 6:08 am ---- very clean example, and welcome to the site
#19: Re: My Black 206 Project! Author: PugJH, Location: NorthantsPosted: Wed Aug 31, 2011 6:48 am ----
MrBSI wrote:
Rob2859 wrote:
you can find the paint code on the inside of the door
I reckon being an early 206 that the white info sticker will be on the passenger side suspension strut tower under the bonnet.
removing front plate might show colour code aswel
#20: Re: My Black 206 Project! Author: 00budham00, Location: IpsPosted: Wed Aug 31, 2011 1:46 pm ---- hi and welcome
#21: Re: My Black 206 Project! Author: Reflekt., Location: South WalesPosted: Wed Aug 31, 2011 2:49 pm ---- thanks again for the comments people!
MrBSI wrote:
Reflekt. wrote:
Thanks for the comments guys. Ive got my eye on some ph2 front lights that end tomorrow on ebay so time will tell.
You will also need a non plexed GTI / double optic headlamp stalk to make crystal headlamps work correctly.
You MAY be lucky & find the grey 3 pin headlamp connectors already tucked up behind the headlamps ready & waiting, if not then you also need to order the following parts from your local Peugeot / Citroen main dealer.
Grey H7 connector 6541 J6 £2.30 elec clip holder & you need 2.
Pin for the connector 6541 E6 £0.53 Harness clip & you need 6.
Thats awesome mate thanks for your help. Is the stalk simply plug & play with the said connectors in place? also best place to get a stalk? Will any Ph2 stalk do?
#22: Re: My Black 206 Project! Author: Reflekt., Location: South WalesPosted: Wed Aug 31, 2011 3:16 pm ---- Also just won these bad boys on eBay///
#23: Re: My Black 206 Project! Author: MrBSI, Location: What's it to you? ? ?Posted: Thu Sep 01, 2011 3:34 am ----
Reflekt. wrote:
Thats awesome mate thanks for your help. Is the stalk simply plug & play with the said connectors in place? also best place to get a stalk? Will any Ph2 stalk do?
Fit the connectors then stalk is simple plug & play, NOT phase 2!
You need a non plexed phase 1 GTI / double optic headlamp stalk
OR
PM Lee on here as he can tweak your original stalk so it works correctly with the crystals.
#24: Re: My Black 206 Project! Author: Reflekt., Location: South WalesPosted: Thu Sep 01, 2011 6:29 pm ---- Picked up my lights today and very eager to get them in, gettin the relays ect tomorrow to fit them... Was gonna smoke them but dont think im gonna bother just yet.
I managed to get an SP handbrake (i think). The guy selling the lights had a box full of bits from a grand turisme he had broken and gave it to me and happend to have the handbrake in with it! Bargain!
Also should have some SP sliders and a Ph2 bootstrip within the next two weeks.
Me and my mate fixed the speakers today aswell, nice surprise to see some alpine type S behind the door cards unwired, saves me buying a new set!
Pics will be up tomorrow.
#25: Re: My Black 206 Project! Author: MrBSI, Location: What's it to you? ? ?Posted: Fri Sep 02, 2011 2:15 am ----
Reflekt. wrote:
Picked up my lights today and very eager to get them in, gettin the relays ect tomorrow to fit them...
You DON'T need relays, simply change the headlamp stalk for the correct DOUBLE optic type & then the crystal lights will work correctly.
#26: Re: My Black 206 Project! Author: Reflekt., Location: South WalesPosted: Fri Sep 02, 2011 2:52 am ---- I know, but the local scrappie wants £20 for one, when a relay and a bit of wire is quite alot less. Eventually I will do it properly with the correct stalk but I'm impatient and want it done now lol
#27: Re: My Black 206 Project! Author: Reflekt., Location: South WalesPosted: Fri Sep 02, 2011 7:58 am ---- Riiiight... Another update.
Got my lights in The mrs left her car in the way of the drive and went shopping with the her mother (Women!!) so couldnt get the car out to get a relay, so i just wired them in, no relay or stalk ect. They work fine for now, bar the low beam going off when the high beams on, so when i can be bothered ill get myself a stalk and go from there. VERY easy to do i dont see what all the fuss is about?! Could have got my Nan down here to do it!
Anyway pics
Also a pic of my new handbrake...
Finally, i got some goodies through the door in the shape of LED numberplate lights. Took the cases from the bootstrip to find this...
Errrrr! so they got cleaned...
And final product...
ALOT better.
Will get some pics of them in when its dark, pretty pointless taking pics in the daylight
Also dont know wether ive mentioned but ive got some flat blade wipers on the way.
C&C?
#28: Re: My Black 206 Project! Author: johnboy1989, Location: South walesPosted: Fri Sep 02, 2011 11:13 am ---- Cant believe you got that Handbrake for free off that guy when we went to get the lights you lucky git lol
#29: Re: My Black 206 Project! Author: Reflekt., Location: South WalesPosted: Sat Sep 03, 2011 12:35 pm ----
johnboy1989 wrote:
Cant believe you got that Handbrake for free off that guy when we went to get the lights you lucky git lol
Lol i know ive had nothing but good luck with it! (touch wood)
Ordered some new foglight bulbs yesterday as one has blown, also some sidelight bulbs.
Debating getting HID's, are they blinding for people infront on the 206? I had some on my corsa with reflector headlights and they lit up absolutely everything infront of me lol. I know theyre illegal ect but they look so good!
#30: Re: My Black 206 Project! Author: Rob2859, Location: HalifaxPosted: Sat Sep 03, 2011 6:16 pm ---- Get H7r's/Anti-glare HID's. I have some in mine and my mates who i have driven past/behind me said they had no problem.
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17123
Online Now [109]:
Visitors: 108
Members: 0
Staff Online Now:
Page Views:
General
The mrs left her car in the way of the drive and went shopping with the her mother (Women!!) so couldnt get the car out to get a relay, so i just wired them in, no relay or stalk ect. They work fine for now, bar the low beam going off when the high beams on, so when i can be bothered ill get myself a stalk and go from there. VERY easy to do i dont see what all the fuss is about?! Could have got my Nan down here to do it!
