#1: heater blower/climate control Author: stevepengilly, Location: readingPosted: Sat Oct 08, 2011 6:38 am ---- Blower/Motor Will Stop Going...Then Start Up Again By Itself...Dont Think It Actually Stops Can Hear It A Tad...And A Wee Squealing Noise When It Stops Blowing, it works when car is started but gets lairy whilst driving!
any ideas folks
this is a x reg GTI with climate control....new to Pug world! :-/
#2: Re: heater blower/climate control Author: A18NHH, Location: MiddlesbroughPosted: Sat Oct 08, 2011 6:42 am ---- thnk you need to replace the heater blower motor - had a similar problem on my 2002 GTi, bought a replacement motor and fitted it myself and never had a problem since
#3: Re: heater blower/climate control Author: paul_c, Location: UKPosted: Sat Oct 08, 2011 6:47 am ---- A drop fo WD40 will probably cure the squeak. Stopping and starting of the motor is normal for climate control, you can control the fan to blow at a fixed speed if you want though.
#4: Re: heater blower/climate control Author: Edward, Location: In the garagePosted: Sat Oct 08, 2011 7:46 am ---- Definately needs a new fan. Mine behaved in an identical manner. Buying a new fan solved the problem. No point getting a 2nd hand fan. Fan is specific to cars with climate control.
#5: Re: heater blower/climate control Author: A18NHH, Location: MiddlesbroughPosted: Sat Oct 08, 2011 10:23 am ---- i found a fan from anoother 206 GTi with climate control - 2nd hand pair £25 and like i say still have no problems with it now
#6: Re: heater blower/climate control Author: ronnie, Location: LanarksPosted: Mon Oct 24, 2011 2:51 pm ---- is this the same blower motor for a Y-reg 206cc 2.0ltr
I think I have the same problem as original poster
Is the blower motor controled by a + and - buttom?
Our 1.6 206cc has a switch so it is a bit different
Did you ever get it sorted?
#7: Re: heater blower/climate control Author: ronnie, Location: LanarksPosted: Thu Oct 27, 2011 9:31 am ---- It is the blower motor resistor
Just sorted mine with a brand new resistor from e-bay £40
It is from a 307 but it works fine.
30 minute job to remove the motor unit ,replace the resistor and then install back in the car.
Remove glove box and housing with 7 torx screws and then twist off the blower unit complete.
Hardest part was pressing off the blower fan cage as I was worried it would break.
Easy fix.
Hope this helps others
Ronnie
#8: Re: heater blower/climate control Author: Edward, Location: In the garagePosted: Thu Oct 27, 2011 12:19 pm ----
ronnie wrote:
It is the blower motor resistor
No it's not because the cars with climate control don't have a resistor for the fan.
#9: Re: heater blower/climate control Author: ronnie, Location: LanarksPosted: Thu Oct 27, 2011 1:01 pm ---- HEATER BLOWER MOTOR RESISTOR FOR XSARA PICASSO 307 206 AIRCON MODEL CLIMATE
#10: Re: heater blower/climate control Author: djaydearz, Location: UKPosted: Mon Nov 14, 2011 11:19 am ---- Hi all, sorry for the bump thread
I have a 2002, 206 1.4lx
My fan only works on setting 4, looking into other posts, it seems to be the motor or more probable, the resistor iteself.
My problem is that i can't for the life of me work out how to remove the blower motor. People say just turn it clockwise/anticlockwise (mixed instructions there) but i can't get it to budge the slightest
(I have removed the 1 screw in it) but its so awkward i can barely get my hands in the gaps!)
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy
Membership:
Latest: 
New Today: 0
New Yesterday: 1
Overall: 17127
Online Now [66]:
Visitors: 65
Members: 0
Staff Online Now:
Page Views:
General
