#1: would anyone be interested? Author: Lowercase, Location: East SussexPosted: Thu Oct 27, 2011 1:12 pm ---- Hey Info'ers
As some of you know I'm trimming up some leather recaro's at the moment, and im thinking of further things i could offer members of 206info.
im already in talks with some people for wallet friendly retrims.
£45 per front seat, £50 rear bench + materials.
Door cards: £50 a set (2 fronts, 2 backs)? + materials (may vary a bit if you want something extra special/ add a bit if you want boot door trim, or parcel shelf etc too) cheaper if its just the inserts you want done
but would anyone be interested in things such as:
- Leather/alcantara Speedo binacles £35?
- matching leather centre console? (would def like to try make some of them)
- Gear Gaitors
i'll either make a limited number batch, or i could do some with different colour stitching, or two tone leather etc.
anything else you think you might like? Last edited by Lowercase on Thu Oct 27, 2011 3:55 pm; edited 3 times in total
#2: Re: would anyone be interested? Author: Rob2859, Location: HalifaxPosted: Thu Oct 27, 2011 1:18 pm ---- All I can say is good luck. I am re-trimming most of my interior and its a ball ache.
#3: Re: would anyone be interested? Author: Lowercase, Location: East SussexPosted: Thu Oct 27, 2011 1:19 pm ----
Rob2859 wrote:
All I can say is good luck. I am re-trimming most of my interior and its a ball ache.
thanks bro, yea its a bit daunting at first but with a bit of patience and some sneaky trade secrets its worth doing!
#4: Re: would anyone be interested? Author: mtempsch, Location: Gothenburg, SwedenPosted: Thu Oct 27, 2011 2:25 pm ----
DaSneakyGit wrote:
Hey Info'ers
but would anyone be interested in things such as:
- matching leather centre console? (would def like to try make some of them)
Definitely interested (depending on price) in one matching the stock 180/RC binnacle
#5: Re: would anyone be interested? Author: MRyan89, Location: Home: Fleet, Hampshire, Uni: Portsmouth!Posted: Thu Oct 27, 2011 2:33 pm ---- Yeah I would love to get my center console done, and maybe the seats too at some point because they are looking a bit tired lol
#6: Re: would anyone be interested? Author: Ali_H, Location: Chichester, SussexPosted: Thu Oct 27, 2011 2:50 pm ---- Door cards?
#7: Re: would anyone be interested? Author: Lowercase, Location: East SussexPosted: Thu Oct 27, 2011 2:55 pm ----
mtempsch wrote:
DaSneakyGit wrote:
Hey Info'ers
but would anyone be interested in things such as:
- matching leather centre console? (would def like to try make some of them)
Definitely interested (depending on price) in one matching the stock 180/RC binnacle
hopefully i can find a matching material to the 180 one. otherwise i could do a bundle deal for a binacle and centre console so they both match.
#8: Re: would anyone be interested? Author: 206Mike, Location: ManchesterPosted: Thu Oct 27, 2011 3:00 pm ---- What's a Binnacle?
#9: Re: would anyone be interested? Author: Lowercase, Location: East SussexPosted: Thu Oct 27, 2011 3:00 pm ----
Ali_H wrote:
Door cards?
id be up for doing that yea mate.
thankfully its a matter of doing it once and then ill have a good template i can do all future door cards off/tailor as you want it.
#10: Re: would anyone be interested? Author: Lowercase, Location: East SussexPosted: Thu Oct 27, 2011 3:05 pm ----
Fowla wrote:
:( What's a Binnacle?
this
#11: Re: would anyone be interested? Author: Ali_H, Location: Chichester, SussexPosted: Thu Oct 27, 2011 3:14 pm ----
DaSneakyGit wrote:
Ali_H wrote:
Door cards?
id be up for doing that yea mate.
thankfully its a matter of doing it once and then ill have a good template i can do all future door cards off/tailor as you want it.
I was actually thinking of my 306, i'm thinking of giving it a freshen up for next years show season and the door cards still need matching off with the seats.
#12: Re: would anyone be interested? Author: Rob2859, Location: HalifaxPosted: Thu Oct 27, 2011 3:19 pm ---- You will be lucky to trim the centre console as you vents probably won't fit back in. The door-cards are quite annoying to do, hence why they are under my bed haha.
#13: Re: would anyone be interested? Author: Lowercase, Location: East SussexPosted: Thu Oct 27, 2011 3:24 pm ----
Ali_H wrote:
DaSneakyGit wrote:
Ali_H wrote:
Door cards?
id be up for doing that yea mate.
thankfully its a matter of doing it once and then ill have a good template i can do all future door cards off/tailor as you want it.
I was actually thinking of my 306, i'm thinking of giving it a freshen up for next years show season and the door cards still need matching off with the seats.
ah yea, as long as you can send me the cards then i can figure something out i think.
#14: Re: would anyone be interested? Author: 206Mike, Location: ManchesterPosted: Thu Oct 27, 2011 3:27 pm ---- Looks sexy, Nice job on that
#15: Re: would anyone be interested? Author: Lowercase, Location: East SussexPosted: Thu Oct 27, 2011 3:28 pm ----
Rob2859 wrote:
You will be lucky to trim the centre console as you vents probably won't fit back in. The door-cards are quite annoying to do, hence why they are under my bed haha.
yea, the top cowel is the easy bit. the flush fit around the air vents is a challenge, it depends on the thickness of the material mostly, as obviously you need to get it around the edges without it being a big buldgey mess. i have a little trick to help with that. but yea, ill be attempting it on my own first.
alcantara would be the easier option for the center console, as its nicer to work with on intricate shapes.
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy