#1: What connector? Author: karimali831, Location: EnglandPosted: Thu Nov 10, 2011 6:16 pm ---- I upgraded from frosted to crystal headlights, the setup is pretty much straight forward but the main lights uses different connector, so can anyone tell me I what connector I need as circled red in the picture:
And also the headlight bolts, current ones are too rusty.
Thanks.
EDIT. Forgot to mention, do I need relay also with this also? If so can someone point my in the right direction where to buy the relay?
#2: Re: What connector? Author: Ali_H, Location: Chichester, SussexPosted: Thu Nov 10, 2011 6:18 pm ---- H4 to H7 adaptor.
#3: Re: What connector? Author: karimali831, Location: EnglandPosted: Thu Nov 10, 2011 6:27 pm ----
Ali_H wrote:
H4 to H7 adaptor.
Where from? I'm looking for the straight 3-pin connector, looks the same as the adjuster motor lead.
#4: Re: What connector? Author: DJ-, Location: UKPosted: Fri Nov 11, 2011 1:52 am ---- its not the same as the adjuster, its bigger.
#5: Re: What connector? Author: NorthantsBen, Location: Raunds, NorthamptonshirePosted: Fri Nov 11, 2011 2:51 am ---- The adjuster motor plug is the exact sIze dj, just has the notch in different place so you can't fit it In
Are you Any good at wireing karimali831 ?
#6: Re: What connector? Author: MrBSI, Location: What's it to you? ? ?Posted: Fri Nov 11, 2011 3:21 am ---- The connectors plugs & pins are less then £8 for a set from any Peugeot / Citroen main dealer.
This info has been covered / posted up no end of times on here by Lee & myself
#7: Re: What connector? Author: Lee, Location: EnglandPosted: Fri Nov 11, 2011 4:54 am ----
NorthantsBen wrote:
The adjuster motor plug is the exact sIze dj, just has the notch in different place so you can't fit it In
Are you Any good at wireing karimali831 ?
Nothing a stanley knife blade can't sort out
#8: Re: What connector? Author: NorthantsBen, Location: Raunds, NorthamptonshirePosted: Fri Nov 11, 2011 7:33 am ----
Lee wrote:
NorthantsBen wrote:
The adjuster motor plug is the exact sIze dj, just has the notch in different place so you can't fit it In
Are you Any good at wireing karimali831 ?
Nothing a stanley knife blade can't sort out
Exactly
Not that I have ever done that before
#9: Re: What connector? Author: karimali831, Location: EnglandPosted: Fri Nov 11, 2011 9:11 am ----
NorthantsBen wrote:
The adjuster motor plug is the exact sIze dj, just has the notch in different place so you can't fit it In
Are you Any good at wireing karimali831 ?
Yes I'm good at wiring, I just want a link to buy the parts because I won't be able to drive at night without them
I was just about to go out to use the adjuster plug for the lights so you sure it won't fit in at all? And also the headlight bolts, can't find them anywhere.
Thanks again.
#10: Re: What connector? Author: karimali831, Location: EnglandPosted: Fri Nov 11, 2011 7:11 pm ---- anyone know where to get 3-pin connector part please?
"6541.J6" doesn't return any results for me..
#11: Re: What connector? Author: macca1411, Location: Westhoughton, LancashirePosted: Sat Nov 12, 2011 2:02 am ----
karimali831 wrote:
anyone know where to get 3-pin connector part please?
"6541.J6" doesn't return any results for me..
Have you been into the dealer and asked for that part number?
#12: Re: What connector? Author: MrBSI, Location: What's it to you? ? ?Posted: Sat Nov 12, 2011 4:27 am ----
macca1411 wrote:
karimali831 wrote:
anyone know where to get 3-pin connector part please?
"6541.J6" doesn't return any results for me..
Have you been into the dealer and asked for that part number?
Dont talk daft, thats far to easy
#13: Re: What connector? Author: karimali831, Location: EnglandPosted: Sat Nov 12, 2011 6:31 pm ----
MrBSI wrote:
macca1411 wrote:
karimali831 wrote:
anyone know where to get 3-pin connector part please?
"6541.J6" doesn't return any results for me..
Have you been into the dealer and asked for that part number?
Dont talk daft, thats far to easy
Waiting for monday
I have another question, one end obviously to connect to the headlight but the other end the wires go into in from the loom? How does that work?
Cheers!
#14: Re: What connector? Author: NorthantsBen, Location: Raunds, NorthamptonshirePosted: Sun Nov 13, 2011 2:53 am ---- This might be of big help, got a diagram that may be able to use to wire the plugs in.
#15: Re: What connector? Author: karimali831, Location: EnglandPosted: Mon Nov 14, 2011 8:05 pm ---- I have got the clips now and understand the wiring diagram but don't understand how the wires will fit inside? I was told there is another part that connects to the clip but is not sold as a seperate as it should come from the loom. For my case I just have those 3 wires and clip any suggestions?
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy