#1: Wardie's White Fiesta ST Project Author: wardie_206, Location: Rayleigh, essexPosted: Sat Dec 10, 2011 1:18 pm ---- Hey Guys,
So after owning my 206 for 3 years i wanted something a bit quicker but still something i can mod, i decided that after alot of looking and what i could afford the ST was the car for me:
this was my pug
Now after owning my ST now for around 2 months, i thought it was about time to show you all what i have been doing to it and let you no my future plans :)! sorry about the pictures guys!
So here goes:
This is her when i got her, she come with a K&N 57i induction kit and a millteck cat back which sounds the dogs n*ts lol. the wheels had also recently been powder coated black which i think looks nice with the white.
So after looking at the things i wanted to do mods wise, i decided to buy some white with black writing gel overlays for the ford badges:
After looking at alot of other cars that had been lowered i wanted to get her dropped, so i decided to buy eibach extra low, lowering springs... i wanted to get a set of coilies but what with it coming to christmas i didnt have the money.... however the springs have dropped the car to a really nice height and im really pleased with the look.
So these arrived and off i went and got them fitted
this was the car before the springs,
and this was the car after the sprigs were fitted, its sitting a tiny bit lower now as the springs have settled
I was really pleased with the stance and how much the springs have dropped the car by. the handling is so much better now aswell so i really pleased with them.
Then i had a look at some wind deflectors, personally i think they look really nice so ordered some and got them fitted.
I have also painted the grey, dull plastics gloss black, just another little mod that i feel adds just a little something more to the look of the car.
And this is how the car sits ATM whilst i wait for my birthday and christmas to see what goodies i get lol.
So mods to come are :
4-1 Millteck mani and decat
Newman cams
remap, either dreamscience or custom
omex launch control system
possably cossie wheels
windows tinted
cossie inlet mani.
Thanks for looking,... Let me no what u think guys, all comments good or bad are most welcome :)! sorry again about the pictures!
Wardie
#2: Re: Wardie's White Fiesta ST Project Author: Lewis, Location: Isle Of WightPosted: Sat Dec 10, 2011 1:21 pm ---- nice car i think you should either have the wheels done white or get rid of the blue stripe as the blue and black dont go! Other than that, nice car
#3: Re: Wardie's White Fiesta ST Project Author: wardie_206, Location: Rayleigh, essexPosted: Sat Dec 10, 2011 1:25 pm ----
Lewis wrote:
nice car i think you should either have the wheels done white or get rid of the blue stripe as the blue and black dont go! Other than that, nice car
Thanks Buddy :D!
really pleased with her!
yea looking into getting rid of the blue stripe mate, the only thing that sort of stops me is i dont want it to look to much like the fiesta van if that makes sence lol.
#4: Re: Wardie's White Fiesta ST Project Author: kingdom200, Location: Leamington SpaPosted: Sat Dec 10, 2011 1:33 pm ---- it wont mate, trust me, it will look mint... also do the whole front bit gloss black, tint the windows and do the roof then you will have the st version of my gfs Ztec s
#5: Re: Wardie's White Fiesta ST Project Author: wardie_206, Location: Rayleigh, essexPosted: Sat Dec 10, 2011 1:37 pm ----
kingdom200 wrote:
it wont mate, trust me, it will look mint... also do the whole front bit gloss black, tint the windows and do the roof then you will have the st version of my gfs Ztec s
Thanks kingdom :)!
wow loving the MK7!! looks wicked mate!
when i done all the plastics it was only the front i couldnt get off lol! im gonna have a stab at it tomo and getting it done lol!
hows the megane mate??
#6: Re: Wardie's White Fiesta ST Project Author: Mattie-RS, Location: A Track near you ;)Posted: Sat Dec 10, 2011 1:55 pm ---- About Time
wardie_206 wrote:
4-1 Millteck mani and decat
Newman cams
remap, either dreamscience or custom
omex launch control system
possably cossie wheels
windows tinted
cossie inlet mani.
I'm liking this
#7: Re: Wardie's White Fiesta ST Project Author: wardie_206, Location: Rayleigh, essexPosted: Sat Dec 10, 2011 1:57 pm ----
Mattie-RS wrote:
About Time
wardie_206 wrote:
4-1 Millteck mani and decat
Newman cams
remap, either dreamscience or custom
omex launch control system
possably cossie wheels
windows tinted
cossie inlet mani.
I'm liking this
hahah lol, thanks mattie!!
just waiting for the pennies and then it will be done lol.
im still in thr process of selling the pug and thinking that when its sold might by a charger kit for the fiesta
then i might be able to keep up with yah lol!
#8: Re: Wardie's White Fiesta ST Project Author: Mattie-RS, Location: A Track near you ;)Posted: Sat Dec 10, 2011 2:02 pm ----
wardie_206 wrote:
Mattie-RS wrote:
About Time
wardie_206 wrote:
4-1 Millteck mani and decat
Newman cams
remap, either dreamscience or custom
omex launch control system
possably cossie wheels
windows tinted
cossie inlet mani.
I'm liking this
hahah lol, thanks mattie!!
just waiting for the pennies and then it will be done lol.
im still in thr process of selling the pug and thinking that when its sold might by a charger kit for the fiesta
then i might be able to keep up with yah lol!
haha maybe eh
will be one mean machine with a charger!!!
#9: Re: Wardie's White Fiesta ST Project Author: JordGJ, Location: Leeds / West MidlandsPosted: Sat Dec 10, 2011 2:25 pm ---- i know it's over done but if i had a mk6 it would definitely have to have cossie alloys!
and i'd take the blue stripe off too
nice car mate
#10: Re: Wardie's White Fiesta ST Project Author: wardie_206, Location: Rayleigh, essexPosted: Sat Dec 10, 2011 2:38 pm ----
Mattie-RS wrote:
wardie_206 wrote:
Mattie-RS wrote:
About Time
wardie_206 wrote:
4-1 Millteck mani and decat
Newman cams
remap, either dreamscience or custom
omex launch control system
possably cossie wheels
windows tinted
cossie inlet mani.
I'm liking this
hahah lol, thanks mattie!!
just waiting for the pennies and then it will be done lol.
im still in thr process of selling the pug and thinking that when its sold might by a charger kit for the fiesta
then i might be able to keep up with yah lol!
haha maybe eh
will be one mean machine with a charger!!!
Maybe ;)! Lol!
Yea mate I would love to charge it... Just the pennies lol!
How's the clio matey??
#11: Re: Wardie's White Fiesta ST Project Author: wardie_206, Location: Rayleigh, essexPosted: Sat Dec 10, 2011 2:41 pm ----
JordGJ wrote:
i know it's over done but if i had a mk6 it would definitely have to have cossie alloys!
and i'd take the blue stripe off too
nice car mate
Thanks jord mate!!
Yea I've been offered some cossie alloys in graphite grey... I'm just hoping I can get the money together for them
And yea buddy looking to get those stripes off lol!
Thanks for comments
#12: Re: Wardie's White Fiesta ST Project Author: Mattie-RS, Location: A Track near you ;)Posted: Sat Dec 10, 2011 2:49 pm ----
Clio is alright, not been used atm!!
I've been putting pics on FB of any updates!
#13: Re: Wardie's White Fiesta ST Project Author: E5GDM, Location: EssexPosted: Sat Dec 10, 2011 4:02 pm ---- I'm not normally one for stripes, but I'd keep the ST ones.
#14: Re: Wardie's White Fiesta ST Project Author: Timon2210, Location: PalestinePosted: Sat Dec 10, 2011 4:21 pm ---- nice car,great job so far
#15: Re: Wardie's White Fiesta ST Project Author: Bilco9, Location: Who's askingPosted: Sat Dec 10, 2011 4:39 pm ----
kingdom200 wrote:
it wont mate, trust me, it will look mint... also do the whole front bit gloss black, tint the windows and do the roof then you will have the st version of my gfs Ztec s
Theirs a guy around my area with one of them. they look awesome! just a shame they're not very fast!!!
#16: Re: Wardie's White Fiesta ST Project Author: ExoVyper, Location: Waiting for the tugboats to push me into port (Whitehaven)Posted: Sat Dec 10, 2011 5:24 pm ---- i thought launch control systems are only really for turbo'd cars?
#17: Re: Wardie's White Fiesta ST Project Author: Rich196, Posted: Sat Dec 10, 2011 6:18 pm ----
ExoVyper wrote:
i thought launch control systems are only really for turbo'd cars?
No sure you need anymore launch control on 150bhp than your foot. Its not exactly gonna set the world spinning backwards.
#18: Re: Wardie's White Fiesta ST Project Author: jayz206gti, Location: TamworthPosted: Sat Dec 10, 2011 6:42 pm ---- I wouldnt waste your time with launch control! I had two ST's and spent alot on my red one. Had full Miltek including 4-1 manifold, cossie inlet, piper cams, magnicores and a performance panel filter. Combine this with hours of mapping and it achieved 193, 188, 189 on 3 sepperate rollers. Was a giggle to drive until it rained. Then the thing was pretty useless until i changed the tyres. All the work was done by Pumabuild.
#19: Re: Wardie's White Fiesta ST Project Author: wardie_206, Location: Rayleigh, essexPosted: Sun Dec 11, 2011 5:21 am ---- Thanks for all the comments guys!!
Definetly looking into getting those stripes off like you have all suggested :)!
With relation to the launch control system, I want it more for the rev limiter system that it has... The ST u get to the limiter and the car just dies sort of thing so that's really y I'm looking into it. :)!
#20: Re: Wardie's White Fiesta ST Project Author: jayz206gti, Location: TamworthPosted: Sun Dec 11, 2011 7:38 am ---- The brick wall of a limiter is removed with the re-map, mine was on both cars mate so its a needless purchase.
#21: Re: Wardie's White Fiesta ST Project Author: wardie_206, Location: Rayleigh, essexPosted: Sun Dec 11, 2011 8:51 am ---- Hahaha lmao! Brick wall limiter!! That brilliant lol! So true mate...
Oh is it?? I didn't realise that! Thanks for the mate! What map did you use on yours out of interest buddy??
#22: Re: Wardie's White Fiesta ST Project Author: jayz206gti, Location: TamworthPosted: Sun Dec 11, 2011 9:24 am ---- It was the good old Bluefin that was used back then, dont know if theirs better software out now bcause that was over 5 years ago now.
#23: Re: Wardie's White Fiesta ST Project Author: NorthantsBen, Location: Raunds, NorthamptonshirePosted: Sun Dec 11, 2011 9:46 am ---- quite like these cars, next door has one, love the white badges you put on,
and still got your center caps, i hear people geting stolen all the time skegness carpark is bad for center cap missing apparently
#24: Re: Wardie's White Fiesta ST Project Author: Rich196, Posted: Sun Dec 11, 2011 11:37 am ---- you shouldn't ever really get to the limiter so its still a bit pointless
#25: Re: Wardie's White Fiesta ST Project Author: shell-vt, Location: durhamPosted: Sun Dec 11, 2011 1:37 pm ---- rot box racing at its best ....
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17121
Online Now [503]:
Visitors: 502
Members: 0
Staff Online Now:
Page Views:
General
i think you should either have the wheels done white or get rid of the blue stripe as the blue and black dont go! Other than that, nice car 
skegness carpark is bad for center cap missing apparently 
