#1: the problems go on and on Author: DavidPCoates, Location: UKPosted: Fri Dec 30, 2011 9:00 am ---- after doing the head twice on my 206 it then ran awful, this was tested and found 2 injectors were faulty, changed and all ok.
BUT
Now the temperature gauge only moves up the dial a little, was told ah ha thats the thermostat, so for the great expence of £9 i got and fitted another, low and behold its still not moving!!!! Any ideas???
Dave
#2: Re: the problems go on and on Author: MrBSI, Location: What's it to you? ? ?Posted: Fri Dec 30, 2011 9:01 am ---- Coolant temp sensor working correctly?
#3: Re: the problems go on and on Author: DavidPCoates, Location: UKPosted: Fri Dec 30, 2011 9:03 am ---- how would i check it, and why would it break?
#4: Re: the problems go on and on Author: AshH, Location: BirminghamPosted: Fri Dec 30, 2011 9:07 am ----
DavidPCoates wrote:
how would i check it, and why would it break?
Because its French :/
#5: Re: the problems go on and on Author: MrBSI, Location: What's it to you? ? ?Posted: Fri Dec 30, 2011 9:08 am ---- Coolant temp sensor is a known failure point on the TU engines.
You should be able to check when the thermostat opens as the temp dial gets to just under 90 deg C, the top radiator hose should get hot as the coolant starts to pass through to flow in to the rad.
Where did the new thermostat come from?
Genuine Peugeot / Citroen thermostat just under £10, fitted it last week on my TU3
#6: Re: the problems go on and on Author: DavidPCoates, Location: UKPosted: Fri Dec 30, 2011 9:14 am ---- new thermostat, from gsf.
i guess there isnt anything else left, im assuming the new thermostat is ok, next guess would be switch.
#7: Re: the problems go on and on Author: Lee, Location: EnglandPosted: Fri Dec 30, 2011 9:16 am ---- Search for a post I made, I listed the ohms reading that the ECT should give out at different temps.
Also listed the voltage for the pin out of the ECU I think.
#8: Re: the problems go on and on Author: DavidPCoates, Location: UKPosted: Fri Dec 30, 2011 9:41 am ---- I am right it is the green connector on the top of the head, right hand side as you look at it.
Dave
#9: Re: the problems go on and on Author: MrBSI, Location: What's it to you? ? ?Posted: Fri Dec 30, 2011 9:46 am ----
DavidPCoates wrote:
I am right it is the green connector on the top of the head, right hand side as you look at it.
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy
Membership:
Latest: 
New Today: 0
New Yesterday: 1
Overall: 17127
Online Now [66]:
Visitors: 65
Members: 0
Staff Online Now:
Page Views:
General
