#46: Re: SINFUL DESIGN GTi 180 Track Project Author: Seabook, Posted: Sun Jun 03, 2012 1:04 pm ----
Addaz wrote:
Arent you going to strip it a little more mate?
Good start though
stock hatch class require full interior present
#47: Re: SINFUL DESIGN GTi 180 Track Project Author: spike_202, Location: West midsPosted: Sun Jun 03, 2012 1:38 pm ---- I personally think it looks better with the rear carpeted
#48: Re: SINFUL DESIGN GTi 180 Track Project Author: SinfulDesignCom, Location: Ashford, KentPosted: Sun Jun 03, 2012 7:01 pm ---- I have gone too far to be stock hatch... I recalled the last meet I attended when some total f**kwit put 40psi into his tyres because.. and I quote "it was a dry day". Needless to say, he went into my friends AX GT. Not saying i'm not still tempted to get back into the game, but the question in my head was how I would feel should someone do something similar to this. I have got too attached to the bloody thing...
#49: Re: SINFUL DESIGN GTi 180 Track Project Author: SinfulDesignCom, Location: Ashford, KentPosted: Sun Jun 03, 2012 7:03 pm ---- Anyone know of any other manufacturer of adjustable drop links other than Whiteline? Not too bad at £130, but I am sure some of that is just for the name...
#50: Re: SINFUL DESIGN GTi 180 Track Project Author: Andy_, Location: Isle of ManPosted: Mon Jun 04, 2012 12:56 am ---- This is coming along nicely
#51: Re: SINFUL DESIGN GTi 180 Track Project Author: SinfulDesignCom, Location: Ashford, KentPosted: Mon Jun 04, 2012 8:06 am ----
Andy_ wrote:
This is coming along nicely
Cheers Andy... if time and money weren't such a problem...
#52: Re: SINFUL DESIGN GTi 180 Track Project Author: spike_202, Location: West midsPosted: Mon Jun 04, 2012 6:04 pm ---- Just a question on your harness Matt, is there any specific reason you went for the V shape at the rear of the car? Or would a single strap still be ok for road use? Regarding m.o.t ect
Also were does the side clips atatch to on the standard sub frame?
Just a question on your harness Matt, is there any specific reason you went for the V shape at the rear of the car? Or would a single strap still be ok for road use? Regarding m.o.t ect
Also were does the side clips atatch to on the standard sub frame?
Thanks rich
You cannot use a single strap at the back unless you weld in your own mounts. I am using the existing anchor points for the rear seat belts which are perfect for the split rear harness. If it was a single point it would have to pull to the left or to the right using one of the existing mounts which would fail both MOT and scruntineering. PLUS.. and more importantly, should the worst happen, the force holding you in would be biased towards the side that your strap is fitted and cause potential injury. I bought mine direct from Sabelt outlet. You need some different eye bolts as the thread on those supplied is wrong for Peugeot. I forget which, but they can be got from Tweeks...
#54: Re: SINFUL DESIGN GTi 180 Track Project Author: Seabook, Posted: Tue Jun 05, 2012 5:28 am ----
SinfulDesignCom wrote:
Anyone know of any other manufacturer of adjustable drop links other than Whiteline? Not too bad at £130, but I am sure some of that is just for the name...
thread rod+rose joint is the answer
just get the measure from the old drop link then here we go
Anyone know of any other manufacturer of adjustable drop links other than Whiteline? Not too bad at £130, but I am sure some of that is just for the name...
thread rod+rose joint is the answer
just get the measure from the old drop link then here we go
sometimes the simpliest of ideas are staring you right in the face...
Cheers seabook
#56: Re: SINFUL DESIGN GTi 180 Track Project Author: simpsonrc, Location: coventryPosted: Tue Jun 05, 2012 6:05 pm ---- I made my own rose jointed drop links like seabook said. I’ve got some pictures if you want.
I made my own rose jointed drop links like seabook said. I’ve got some pictures if you want.
Sure thing... would be good. I have got a bearings compnay on my doorstep here in Ashford, so I may pay them a visit tomorrow. Need to find some end threaded rods rather than a full threaded rod. The rose joints dont seem to be a problem.
Sure as hell not paying £130 anymore.. Sorry whiteline
I thought I had some of the separate components but I can’t find them
#59: Re: SINFUL DESIGN GTi 180 Track Project Author: SinfulDesignCom, Location: Ashford, KentPosted: Wed Jun 06, 2012 7:26 am ---- thats exactly the stuff....
thank you - am sure this will help searches in the future too
#60: Re: SINFUL DESIGN GTi 180 Track Project Author: spike_202, Location: West midsPosted: Wed Jun 06, 2012 8:10 am ---- Would these come under group N linkages?
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17126
Online Now [57]:
Visitors: 56
Members: 0
Staff Online Now:
Page Views:
General
[/img]
[/img]
[/img]
