#1: 206 door lock problem ? :/ Author: 138Andy, Location: NottsPosted: Wed Aug 15, 2012 5:32 am ---- the driver side door locking thingy that pops up and down is sitting 2-3mm above the door card ? and im un sure if you can adjust this :/
#2: Re: 206 door lock problem ? :/ Author: MrBSI, Location: What's it to you? ? ?Posted: Wed Aug 15, 2012 5:39 am ---- Its just a plastic lump pushed in to a metal rod.
Try & push it back down BUT be careful & dont bend the rod out of shape!
#3: Re: 206 door lock problem ? :/ Author: 138Andy, Location: NottsPosted: Wed Aug 15, 2012 5:58 am ---- i know lol , i removed the door cards, im putting them back on now and it sits higher than it used to :/ , its not bent or anything :/ im not sure whats wrong with it lol pressing down locks it , but then even when its locked its sitting at the unlock position :/
#4: Re: 206 door lock problem ? :/ Author: MrBSI, Location: What's it to you? ? ?Posted: Wed Aug 15, 2012 6:01 am ----
138Andy wrote:
i know lol , i removed the door cards, im putting them back on now and it sits higher than it used to :/ , its not bent or anything :/ im not sure whats wrong with it lol pressing down locks it , but then even when its locked its sitting at the unlock position :/
Sounds like its catching on something after the door card has been moved, have another look
#5: Re: 206 door lock problem ? :/ Author: 138Andy, Location: NottsPosted: Wed Aug 15, 2012 6:50 am ---- the passenger sides the same o.O both just sitting over the door card :/ might bend it a little and shorten it down , or remove it all together and smooth the hole till i wrap over it
#6: Re: 206 door lock problem ? :/ Author: 138Andy, Location: NottsPosted: Wed Aug 15, 2012 10:26 am ---- Ok couldnt fix the problem so iv pulled it out and smoothed over it, will look s**t for a bit until i get some black & orange vinyl
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy