#1: Front Hub Nut ??mm Author: Mounty, Location: United KingdomPosted: Tue Oct 23, 2012 4:10 pm ---- Anyone know what sized socket I need to remove hub nut on GTi?
Cheers
#2: Re: Front Hub Nut ??mm Author: Addaz, Location: SuffolkPosted: Tue Oct 23, 2012 4:47 pm ---- Could be 32 or 35mm
#3: Re: Front Hub Nut ??mm Author: Mounty, Location: United KingdomPosted: Tue Oct 23, 2012 4:50 pm ---- Its not 32mm, bigger than that. 34mm been suggested on another thread....?
#4: Re: Front Hub Nut ??mm Author: Seabook, Posted: Tue Oct 23, 2012 5:37 pm ---- 35mm
or you could just measure it..... isn't that easier and quicker?
#5: Re: Front Hub Nut ??mm Author: Mounty, Location: United KingdomPosted: Tue Oct 30, 2012 5:10 pm ---- Measured it at 35mm - Bought a 35mm impact socket and used it with impact gun. Came straight off with the gun. Socket felt a little loose and still not sure its not a 34mm nut??
#6: Re: Front Hub Nut ??mm Author: Seabook, Posted: Tue Oct 30, 2012 5:16 pm ---- well if you measure it and it said 35 how can it be 34?
#7: Re: Front Hub Nut ??mm Author: Mounty, Location: United KingdomPosted: Tue Oct 30, 2012 5:25 pm ---- Job to measure with a tape as shaft thru centre of nut prevents you from getting tape close to nut for measuring. 35mm fits but a little play so now thinking it may be 34mm. Didn't matter in end as impact gun removed in 2 secs without having to strap up hub to stop it spinning
#8: Re: Front Hub Nut ??mm Author: DanT, Location: Torbay, EnglandPosted: Tue Oct 30, 2012 5:35 pm ---- Deffo a 35mm on my 180. 34 wasnt anywhere near fitting when i tried guessing first time lol.
#9: Re: Front Hub Nut ??mm Author: Seabook, Posted: Tue Oct 30, 2012 5:42 pm ---- it's all up to you whether you believe is 35mm or not
i use 35mm socket, Dan (above) agree with me, addaz (future master tech in pug dealership) also said 35mm, plus you did use 35mm socket to remove the nut
#10: Re: Front Hub Nut ??mm Author: Mounty, Location: United KingdomPosted: Tue Oct 30, 2012 5:53 pm ---- No axe to grind, 35mm worked for me as i said, but it wasn't a tight fit. Just sayin
#11: Re: Front Hub Nut ??mm Author: Seabook, Posted: Tue Oct 30, 2012 5:55 pm ---- not surprise, either of mine is tight fit.
since they are not reusable i wouldn't worry too much
#12: Re: Front Hub Nut ??mm Author: MrBSI, Location: What's it to you? ? ?Posted: Wed Oct 31, 2012 10:31 am ----
Seabook wrote:
addaz (future master tech in pug dealership)
Also means access to the Peugeot master tech forum
#13: Re: Front Hub Nut ??mm Author: Edward, Location: In the garagePosted: Wed Oct 31, 2012 1:28 pm ---- My Sealey socket is a 35mm..
#14: Re: Front Hub Nut ??mm Author: Addaz, Location: SuffolkPosted: Wed Oct 31, 2012 3:23 pm ----
MrBSI wrote:
Seabook wrote:
addaz (future master tech in pug dealership)
Also means access to the Peugeot master tech forum
Ahhh the site i cant access yet, one day
Thanks though mate, hopefully one day that will be the case
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17126
Online Now [51]:
Visitors: 50
Members: 0
Staff Online Now:
Page Views:
General
