#1: cambelt snapped whilst turning over engine Author: batty1965, Posted: Thu Jan 17, 2013 11:16 am ---- [align=justify]could anybody help please newby to forum left car for two days due to bad icy weather when come to turn car over cambelt snapped so the hasn.t been run i was woundering if this would have bent my valves or would i get away with changing just water pump and cambelt car 206 1.4lx 1998 appreciate any advice possible thanks
#2: Re: cambelt snapped whilst turning over engine Author: Big_Rich180, Posted: Thu Jan 17, 2013 11:27 am ---- Get a garage or competent mechanic to look at it, it could have bent the valves but with out looking we wouldn't know.
#3: Re: cambelt snapped whilst turning over engine Author: Rob2859, Location: HalifaxPosted: Thu Jan 17, 2013 11:36 am ---- I thought the valves cleared on the TU engines?
#4: Re: cambelt snapped whilst turning over engine Author: Big_Rich180, Posted: Thu Jan 17, 2013 11:41 am ----
Rob2859 wrote:
I thought the valves cleared on the TU engines?
I did not know that.
#5: Re: cambelt snapped whilst turning over engine Author: Rob2859, Location: HalifaxPosted: Thu Jan 17, 2013 11:47 am ---- No 100% but I read it before. On the 1.1's anyway so I would have thought all the 8V's were the same.
#6: Re: cambelt snapped whilst turning over engine Author: kandlbarrett, Location: SwindonPosted: Thu Jan 17, 2013 11:50 am ---- I recommend that you contact KrisB either on this forum or on his website - he will probably know for certain rather than guess.
#7: Re: cambelt snapped whilst turning over engine Author: HDI90, Location: sunny stokePosted: Thu Jan 17, 2013 12:12 pm ----
Rob2859 wrote:
I thought the valves cleared on the TU engines?
The TU series is an interference engine
#8: Re: cambelt snapped whilst turning over engine Author: MrBSI, Location: What's it to you? ? ?Posted: Thu Jan 17, 2013 12:20 pm ----
HDI90 wrote:
Rob2859 wrote:
I thought the valves cleared on the TU engines?
The TU series is an interference engine
Correct, valves will be bent.
Compression test is called for first but it's 99.9% certain it's gonna be off with its head
Frozen water pump I'm guessing due to lack of antifreeze.
#9: Re: cambelt snapped whilst turning over engine Author: rttam, Location: devonPosted: Thu Jan 17, 2013 1:17 pm ----
MrBSI wrote:
HDI90 wrote:
Rob2859 wrote:
I thought the valves cleared on the TU engines?
The TU series is an interference engine
Correct, valves will be bent.
Compression test is called for first but it's 99.9% certain it's gonna be off with its head
Frozen water pump I'm guessing due to lack of antifreeze.
iv done quite a few tu jobs at work where the belts have snapped and they have all had bent valves
on the positive side it is a really easy engine to take the head off so shouldnt be mega expensive and if you do it yourself its not overly difficult
#10: Re: cambelt snapped whilst turning over engine Author: Rob2859, Location: HalifaxPosted: Thu Jan 17, 2013 1:21 pm ---- Well thats straightened it out anyway. I remember 2 years ago my cooling system froze up on Christmas morning and it overheated. Fortunately it thawed itself out
#11: Re: cambelt snapped whilst turning over engine Author: kandlbarrett, Location: SwindonPosted: Thu Jan 17, 2013 1:30 pm ----
Rob2859 wrote:
Well thats straightened it out anyway.
Not yet it hasn't; the valves will still be bent! (joke)
#12: Re: cambelt snapped whilst turning over engine Author: macca1411, Location: Westhoughton, LancashirePosted: Thu Jan 17, 2013 2:06 pm ---- You may get away with it if the engine was only being cranked on the starter.
You'll still have to take the head off to make sure though unless you can find a garage with an endoscope.
#13: Re: cambelt snapped whilst turning over engine Author: LeeThr, Location: North West WalesPosted: Thu Jan 17, 2013 2:10 pm ---- I have a complete 1.4 head for sale all valves intact etc, could be an easier option than replacing the valves in your head.
#14: Re: cambelt snapped whilst turning over engine Author: Mattie-RS, Location: A Track near you ;)Posted: Thu Jan 17, 2013 2:45 pm ----
macca1411 wrote:
You may get away with it if the engine was only being cranked on the starter.
You'll still have to take the head off to make sure though unless you can find a garage with an endoscope.
I bet he was still cranking it while it snapped so id say he sent the pistons into a couple of valves
#15: Re: cambelt snapped whilst turning over engine Author: MrBSI, Location: What's it to you? ? ?Posted: Thu Jan 17, 2013 5:46 pm ---- Some if not all the valves will be Donald Ducked.
Its extremely rare a TU gets away without any damage when the timing belt fails.
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy
Membership:
Latest: 
New Today: 0
New Yesterday: 1
Overall: 17122
Online Now [56]:
Visitors: 55
Members: 0
Staff Online Now:
Page Views:
General
