#1: back bumper strip help Author: woodlight, Location: croydonPosted: Sat Feb 09, 2013 8:23 am ---- need a bit of help colour coded my car and the only parts i had left was front bumper and back bumper i got the strip of the front but i cant get the back one off i even try to remove the hole bumper still no luck any help??
Thanks
#2: Re: back bumper strip help Author: kobrakai1986, Location: Caerphilly/Hengoed/Ystrad MynachPosted: Sat Feb 09, 2013 8:40 am ---- There are 2 torx screws and some tabs attached to the strip that fit into the bumper. Bit of elbow grease and some pulling and it will come loose.
#3: Re: back bumper strip help Author: iainlovatt, Posted: Sat Feb 09, 2013 8:43 am ---- Remove the bumper. 3 screws and bolt either side inside the wheel arch. Then remove the strip.
#4: Re: back bumper strip help Author: woodlight, Location: croydonPosted: Sat Feb 09, 2013 9:05 am ---- imma have to go out there when the rain stop and give it some good old pulling till it comes out lol ;),, i tryed to remove the bumper but the bolts were tighter then a nuns c**t loool!
#5: Re: back bumper strip help Author: kobrakai1986, Location: Caerphilly/Hengoed/Ystrad MynachPosted: Sat Feb 09, 2013 9:24 am ---- I got my strip off with the bumper still attached to the car
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy