#1: 206 rear beam Author: Leegsi, Location: Near PortsmouthPosted: Mon Apr 29, 2013 8:08 am ---- Just noticed I have quite a bit of play in the rear beam.
Are all the beams the same from model to model and not engine based.
Ie if I have drums and ABS I just need to fit a Drum and ABS rear beam from any 206?
Also can the bearings be replaced and if they can is there a guide as the guide on here has no pictures.
#2: Re: 206 rear beam Author: nellyhaggis, Location: SheffieldPosted: Mon Apr 29, 2013 12:03 pm ---- There is a guide on here somewhere.
The bearings are about 40 for the beam but getting the old arms off is the tricky bit.
#3: Re: 206 rear beam Author: MrBSI, Location: What's it to you? ? ?Posted: Mon Apr 29, 2013 12:03 pm ---- Sounds like this beam is already beyond just a set of bearings
#4: Re: 206 rear beam Author: ukskater01, Location: sutton surrey/welwyn garden cityPosted: Mon Apr 29, 2013 2:38 pm ---- Listen to mr bsi! I had play in my o/s/r wheel, it was wobbling so bad it was touching the body. I stupidly had it repair and within a year it happened again! By the time you have play it normally means the beam has worn out. I had to replace my axle with a recon in the end. I just wish I'd replace mine in the first place!
#5: Re: 206 rear beam Author: Edward, Location: In the garagePosted: Mon Apr 29, 2013 3:26 pm ---- Put it this way. Bearing in good condition and there's no movement in the rear axle. Imagine what the axle must be like on a car with movement in the trailing arms.
#6: Re: 206 rear beam Author: Leegsi, Location: Near PortsmouthPosted: Mon Apr 29, 2013 3:49 pm ---- Wheres the cheapest place to buy one?
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17128
Online Now [121]:
Visitors: 120
Members: 0
Staff Online Now:
Page Views:
General
