#1: Wire Identification for 2006 KFW 1.4 8v TU3A Engine? Author: very_452001, Location: BirminghamPosted: Sat Jul 05, 2014 5:15 am ---- This wire I found disconnected under the hood at the top of the engine bay (passenger side):
I cant seem to find the socket in the same area where the wire is to plug it in...
What does this wire do?
Car seems to drive normally with no lights on dashboard
#2: Re: Wire Identification for 2006 KFW 1.4 8v TU3A Engine? Author: macca1411, Location: Westhoughton, LancashirePosted: Sat Jul 05, 2014 5:34 am ---- Think it's for the alarm. Guessing you don't have an alarm fitted otherwise it would go to the siren module. Last edited by macca1411 on Sat Jul 05, 2014 5:35 am; edited 1 time in total
#3: Re: Wire Identification for 2006 KFW 1.4 8v TU3A Engine? Author: Lecktorious, Location: ScotlandPosted: Sat Jul 05, 2014 5:35 am ---- If you can't find where it plugs into, it probably does nothing anyway and if it did, you would have known before now.
If you look elsewhere in the engine bay you will probably find a few more unused plugs too.
#4: Re: Wire Identification for 2006 KFW 1.4 8v TU3A Engine? Author: very_452001, Location: BirminghamPosted: Sat Jul 05, 2014 7:00 am ---- Why would Peugeot leave unused wires in the engine bay?
Lets say something goes wrong with the car and the hood is open and the driver pops the hood and the driver sees a disconnected wire. So the suspicious goes straight on that wire.
Or a dishonest mechanic at a garage can use this wire against you and say all sorts of crap.
#5: Re: Wire Identification for 2006 KFW 1.4 8v TU3A Engine? Author: macca1411, Location: Westhoughton, LancashirePosted: Sat Jul 05, 2014 7:03 am ---- Cheaper to build one loom for different models and optional extras, than building an individual loom for each car.
Plenty of manufacturers do it.
#6: Re: Wire Identification for 2006 KFW 1.4 8v TU3A Engine? Author: MrBSI, Location: What's it to you? ? ?Posted: Sat Jul 05, 2014 7:23 am ----
macca1411 wrote:
Cheaper to build one loom for different models and optional extras, than building an individual loom for each car.
Plenty of manufacturers do it.
Its the same in the forklift world to.
1 standard loom is just easier, saves on parts cost & space to.
#7: Re: Wire Identification for 2006 KFW 1.4 8v TU3A Engine? Author: Edward, Location: In the garagePosted: Sat Jul 05, 2014 1:09 pm ----
very_452001 wrote:
This wire I found disconnected under the hood
I didn't know the 206 was sold in the USA.
#8: Re: Wire Identification for 2006 KFW 1.4 8v TU3A Engine? Author: Andrew, Location: Black Country Ay IPosted: Sat Jul 05, 2014 4:32 pm ---- You'll find a few like this around the car. I also have the same engine code and even though it has manual wingmirrors, the connectors are there to attach electric ones
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy