#1: todays work on the other halfs clio Author: rttam, Location: devonPosted: Sat Apr 10, 2010 7:27 am ---- been outside working since 7 this morn and did a fair few mods to my girlfriends clio
heres a few before pics it was already lowered and halos on a few weeks ago but just a good pic to show the wings bonnet as they were
today i did the following:
took off the williams bonnet and sprayed that the right colour
sprayed the bonnet badge gloss black
sprayed and fitted a smooth phase 2 grille
removed the scuttle panel and wipers and painted gloss black
painted up a pair of williams flared wings and fitted them
fitted smoked side repeaters to match the headlights
wired up the sub
removed the rattling heatshield
gave it a huge clean
i know the paint match isnt perfect but considering the original paint is quite faded and i sprayed the bonnet and wings by hand with spray cans i dont think its bad
i dont think it looks bad considering the car only cost £40 as a bog standard mot failure i got through work and all the mods have been e-bay baragains or birthday/xmas/valentines presents from me haha
#2: Re: todays work on the other halfs clio Author: E5GDM, Location: EssexPosted: Sat Apr 10, 2010 7:37 am ---- If that was original Williams bonnet, wings & colour, you should have sold it, must be worth a bit.
#3: Re: todays work on the other halfs clio Author: rttam, Location: devonPosted: Sat Apr 10, 2010 7:41 am ---- nah not really i bought the bonnet along with the stainless exhaust the phase 2 grill and a spoiler which i havnt fitted yet for £50 and iv just bought the wings as her birthday present they were £55 for the pair
#4: Re: todays work on the other halfs clio Author: E5GDM, Location: EssexPosted: Sat Apr 10, 2010 7:44 am ----
rttam wrote:
nah not really i bought the bonnet along with the stainless exhaust the phase 2 grill and a spoiler which i havnt fitted yet for £50 and iv just bought the wings as her birthday present they were £55 for the pair
In that case, top job mate, spice's it up lovely.
#5: Re: todays work on the other halfs clio Author: lofty, Location: Near ManchesterPosted: Sat Apr 10, 2010 7:49 am ---- Looks good.
Gloss black the bump strips and mirrors next. Get rid of nasty faded grey!!
#6: Re: todays work on the other halfs clio Author: tommy, Location: Harrogate - North YorksPosted: Sat Apr 10, 2010 8:26 am ---- You removed, prepped, sprayed and put the bonnet back on, in one day?!?
#7: Re: todays work on the other halfs clio Author: Anony-X, Location: NorwichPosted: Sat Apr 10, 2010 8:56 am ----
tommy wrote:
You removed, prepped, sprayed and put the bonnet back on, in one day?!?
this. Thats pretty damn impressive result out of cans anyway, but done in a day aswell? unbeleivably good.
#8: Re: todays work on the other halfs clio Author: RustyDLK, Location: Armagh - Northern IrelandPosted: Sat Apr 10, 2010 8:59 am ---- looks well . . . .for a non 206 lol
#9: Re: todays work on the other halfs clio Author: tommy, Location: Harrogate - North YorksPosted: Sat Apr 10, 2010 9:02 am ----
Anony-X wrote:
tommy wrote:
You removed, prepped, sprayed and put the bonnet back on, in one day?!?
this. Thats pretty damn impressive result out of cans anyway, but done in a day aswell? unbeleivably good.
How is that good?!
#10: Re: todays work on the other halfs clio Author: aaronrs600, Location: plymouthPosted: Sat Apr 10, 2010 11:59 am ---- are her tesco windscreen wipers the wrong way around? or im putting mine on the wrong way.
i put the "spoiler"/ curve facing forwards
#11: Re: todays work on the other halfs clio Author: rttam, Location: devonPosted: Sat Apr 10, 2010 12:09 pm ---- yep done in half a day actually
thanks guys shes over the moon with it too so im in the good books
and aaron they can only go one way its just the 206 wipers swipe the opposite way to clio
#12: Re: todays work on the other halfs clio Author: rttam, Location: devonPosted: Sun Apr 11, 2010 2:28 am ----
tommy wrote:
Anony-X wrote:
tommy wrote:
You removed, prepped, sprayed and put the bonnet back on, in one day?!?
this. Thats pretty damn impressive result out of cans anyway, but done in a day aswell? unbeleivably good.
How is that good?!
no its not perfect but its pretty damn good considering the rest of the paint is pretty poor as the cars nearly 20 years old and the other half is only an apprentice chef so cant afford hundreds of pounds to pay a bodyshop to do
#13: Re: todays work on the other halfs clio Author: -SDC-, Location: DevonPosted: Sun Apr 11, 2010 4:14 am ----
tommy wrote:
You removed, prepped, sprayed and put the bonnet back on, in one day?!?
Nearly every bodyshop in the world (unless there epic prep work to be done, dent removal, filler fibre glassing ect) should be able to prep and spray in a day.
You should never go more then two hours after spraying the base to spraying the laqure, however im going to presume that this was 2K paint so there was no need to laqure anyway.
The only thing that takes more then a day is you should leave paint for 12 hours before flatting back, however if you us UV heaters you should be able to get this down to about 4 hours.
#14: Re: todays work on the other halfs clio Author: rttam, Location: devonPosted: Sun Apr 11, 2010 9:46 am ----
-SDC- wrote:
tommy wrote:
You removed, prepped, sprayed and put the bonnet back on, in one day?!?
Nearly every bodyshop in the world (unless there epic prep work to be done, dent removal, filler fibre glassing ect) should be able to prep and spray in a day.
You should never go more then two hours after spraying the base to spraying the laqure, however im going to presume that this was 2K paint so there was no need to laqure anyway.
The only thing that takes more then a day is you should leave paint for 12 hours before flatting back, however if you us UV heaters you should be able to get this down to about 4 hours.
cheers some useful tips there for future use as iv just got a cheap 206 im fixing up that needs some body work:D
#15: Re: todays work on the other halfs clio Author: -SDC-, Location: DevonPosted: Sun Apr 11, 2010 11:13 am ----
rttam wrote:
-SDC- wrote:
tommy wrote:
You removed, prepped, sprayed and put the bonnet back on, in one day?!?
Nearly every bodyshop in the world (unless there epic prep work to be done, dent removal, filler fibre glassing ect) should be able to prep and spray in a day.
You should never go more then two hours after spraying the base to spraying the laqure, however im going to presume that this was 2K paint so there was no need to laqure anyway.
The only thing that takes more then a day is you should leave paint for 12 hours before flatting back, however if you us UV heaters you should be able to get this down to about 4 hours.
cheers some useful tips there for future use as iv just got a cheap 206 im fixing up that needs some body work:D
Your welcome Matt, feel free to pop me a PM whilst your doing that for any more tips.
Remeber if its just a panel your respraying, dont bother priming it, scotch the surface up (scotch pad like what your parents will use in the kitchen). Rattle cans are only about 15% paint to put on a couple of coats within 15 mins of each other.
#16: Re: todays work on the other halfs clio Author: aaronrs600, Location: plymouthPosted: Sun Apr 11, 2010 11:27 am ----
rttam wrote:
yep done in half a day actually
thanks guys shes over the moon with it too so im in the good books
and aaron they can only go one way its just the 206 wipers swipe the opposite way to clio
they can go the other way around... the bit the wiper arm attaches pulls sideways and u can turn it around.
had any issues with them that way up ?
#17: Re: todays work on the other halfs clio Author: rttam, Location: devonPosted: Sun Apr 11, 2010 1:09 pm ---- no but now i know they do ill switch them around lol
btw noticed your in plymouth thats where my girlfriend lives and im quite often down there driving around what 206 have you got il keep an eye out for you
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17126
Online Now [49]:
Visitors: 48
Members: 0
Staff Online Now:
Page Views:
General
lol
the bit the wiper arm attaches pulls sideways and u can turn it around. 
