#46: Re: new 206 gti 138 owner Author: andy83, Location: stoke on trentPosted: Thu Oct 09, 2014 3:09 pm ---- There will defo be no de cat yet thats for sure
Psi tuning im only using for power runs they wont be doing my mapping my good mate mark at gt motorsport will be mapping it when the time comes to do so.
Inlet might have to be a job for early next year but im working on doing it before then
#47: Re: new 206 gti 138 owner Author: Project2062014, Location: CornwallPosted: Thu Oct 09, 2014 3:37 pm ---- Coolio will be good to see the results .8-)
#48: Re: new 206 gti 138 owner Author: andy83, Location: stoke on trentPosted: Thu Oct 09, 2014 3:48 pm ---- Of course ill try get a vid also. Will be a contrast of a day though starting with rr then off shopping all day for bits for our new house we move into on the 25th.
#49: Re: new 206 gti 138 owner Author: andy83, Location: stoke on trentPosted: Thu Oct 09, 2014 11:54 pm ---- going to be interesting to see what power is still in there after 107k, its had a good service so all is nice and fresh and i dont expect the panel filter and back box to have added anything.
iv just come from a 242bhp 229lb/ft 12 second 1/4 mile renault 5 gt turbo that was my money pit for years and before that a 189bhp thottle bodied mg zr, im not after any figure chasing with the 206 just improving on the restrictive parts of the engine and if it gains a bit of power along the way then happy days
#50: Re: new 206 gti 138 owner Author: Project2062014, Location: CornwallPosted: Fri Oct 10, 2014 6:29 pm ---- 134 bhp@ fly 107 @ wheel i bet it makes ish.
I ran mine on v-power .137.7 first run 100.000 miles just gone .
109 @ wheel .
Aint not gt5 turbs lol .
Pocket rocket ! Nice
#51: Re: new 206 gti 138 owner Author: andy83, Location: stoke on trentPosted: Fri Oct 10, 2014 10:24 pm ---- i would be more than happy if it made over 130 bhp 130 lb/ft, its always ran on 99 octane and iv made sure the wife only puts that in.
#52: Re: new 206 gti 138 owner Author: andy83, Location: stoke on trentPosted: Sat Oct 11, 2014 5:11 am ---- Just got back from psi tuning must say im chuffed that the car made 136bhp ill upload the graph tomorrow sometime. Now onto house item shopping
#53: Re: new 206 gti 138 owner Author: Project2062014, Location: CornwallPosted: Sat Oct 11, 2014 5:55 am ---- Nice results .
icv Gti-6 . Ive seen a icv for a gti-6(xu10) xsara vts .
It sits on the manifold . Its got a plastic housing and its a L shape with a inlet and out let for idle air .
Im sure you could use it & put a pipe into manifold or drill a hole like the gti6 1 ,fix it to the manifold .
could fix it anywhere and run a pipe to let air in to the manifold after the throttle body .
#54: Re: new 206 gti 138 owner Author: andy83, Location: stoke on trentPosted: Sat Oct 11, 2014 11:19 am ---- cheers pal
nice one for the heads up, iv already bought a gti6 icv
#55: Re: new 206 gti 138 owner Author: andy83, Location: stoke on trentPosted: Sat Oct 11, 2014 11:27 am ---- one of the vids
#56: Re: new 206 gti 138 owner Author: andy83, Location: stoke on trentPosted: Sat Oct 11, 2014 11:30 am ---- and another
#57: Re: new 206 gti 138 owner Author: andy83, Location: stoke on trentPosted: Sat Oct 11, 2014 11:02 pm ---- rr graph, curve looks how it feels to drive, very happy with it, love the low down torque and looks like a peak torque of around 147 lb/ft
#58: Re: new 206 gti 138 owner Author: Project2062014, Location: CornwallPosted: Sun Oct 12, 2014 9:17 am ---- 122 @ the wheel ? Only lose 14 bhp thou drivetrain ?
My results are poor if thats the case . 154@fly 121 @ wheel . 8-(
#59: Re: new 206 gti 138 owner Author: andy83, Location: stoke on trentPosted: Sun Oct 12, 2014 10:37 am ---- Im pretty sure thats engine power not whp
#60: Re: new 206 gti 138 owner Author: andy83, Location: stoke on trentPosted: Sun Oct 12, 2014 11:55 pm ---- for anyone interested psi tuning do custom remaps for the 206 gti all done on there rolling road, with before and after power plots for £250, the operator seemed very interested in mapping my car once it has the exhaust and inlet manifolds fitted
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy
Membership:
Latest: 
New Today: 1
New Yesterday: 1
Overall: 17128
Online Now [83]:
Visitors: 82
Members: 0
Staff Online Now:
Page Views:
General
