#1: brake pedal goes to the floor Author: johnpidge, Posted: Sat Mar 21, 2015 5:27 am ---- Ok - I have had fun and games with my GTI 138 - now I have a spongy pedal that with a little force will go to the floor - it stops the car but in an emergency?????
I have changed discs all round - pads all round (including green stuff up front) - front hoses (were a bit rusty/crusty) and even the brake master cylinder - bled the whole system - oh and new nipples on the front callipers -
Still spongy pedal - and I can push it the floor
I cant seem to get the abs to kick in - although I am a little reluctant to try too hard for obvious reasons
What is causing this - the servo looks quite new and the old master cylinder wasnt leaking all over it
Have been trowing money/parts at it and still the pedal is rubbish - with this lot changed it should take my face off when i hit the pedal
Help
#2: Re: brake pedal goes to the floor Author: johnpidge, Posted: Sat Mar 21, 2015 5:28 am ---- And obviously checked for leaks and topped up etc after bleeding the system
No leaks anywhere
#3: Re: brake pedal goes to the floor Author: MrBSI, Location: What's it to you? ? ?Posted: Sat Mar 21, 2015 5:34 am ---- How was the brake bleeding carried out?
Pressure bleeding? Vacuum bleeding? or manual pedal pressing bleeding?
New discs & pads will result in a spongy pedal until there bedded in.
#4: Re: brake pedal goes to the floor Author: johnpidge, Posted: Sat Mar 21, 2015 5:45 am ---- Discs and pads were done two/three weeks ago and they were fine - more recently noticed the pedal was going long - we changed the pads to green stuff and bled them the first time - then it got worse. They still stop the car but do not insprire any confidence arghhhhhhhhh
#5: Re: brake pedal goes to the floor Author: MrBSI, Location: What's it to you? ? ?Posted: Sat Mar 21, 2015 6:19 am ---- Which method did you use to bleed the brakes?
#6: Re: brake pedal goes to the floor Author: johnpidge, Posted: Sat Mar 21, 2015 6:23 am ---- Sorry - used an Easybleed pressure bleeder
#7: Re: brake pedal goes to the floor Author: johnpidge, Posted: Sat Mar 21, 2015 6:23 am ---- would that make a difference??
#8: Re: brake pedal goes to the floor Author: johnpidge, Posted: Sat Mar 21, 2015 6:26 am ---- its the type you use the pressure off your tyre to operate - is that not good for a Peugeot - poxy french thingie????
#9: Re: brake pedal goes to the floor Author: johnpidge, Posted: Sat Mar 21, 2015 7:35 am ---- would this work better www.amazon.co.uk/Seale...eeding+kit
I asume air is getting behind with a pressure type system??????????
#10: Re: brake pedal goes to the floor Author: johnpidge, Posted: Sat Mar 21, 2015 10:40 am ---- Does the abs unit need bleeding?? how do you do that??
#11: Re: brake pedal goes to the floor Author: ukskater01, Location: sutton surrey/welwyn garden cityPosted: Sat Mar 21, 2015 2:32 pm ---- Did you bleed the master cylinder too?
#12: Re: brake pedal goes to the floor Author: johnpidge, Posted: Sat Mar 21, 2015 2:37 pm ---- Yes we bled the new master cylinder
#13: Re: brake pedal goes to the floor Author: MrBSI, Location: What's it to you? ? ?Posted: Sat Mar 21, 2015 2:40 pm ----
johnpidge wrote:
its the type you use the pressure off your tyre to operate - is that not good for a Peugeot - poxy french thingie????
Used these for years on cars & forklifts including my 2 x 206's both with ABS & never had any issues.
As long as you follow the instructions & watch the maximum recommended air pressure they work fine. About 20 PSI tops on the one I used the other week.
#14: Re: brake pedal goes to the floor Author: johnpidge, Posted: Sat Mar 21, 2015 3:02 pm ---- Would the vacuum type bleed unit work better??
#15: Re: brake pedal goes to the floor Author: johnpidge, Posted: Sat Mar 21, 2015 3:05 pm ---- Gotta be air in the system still
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17126
Online Now [79]:
Visitors: 78
Members: 0
Staff Online Now:
Page Views:
General
