#1: Caliper slider pin stiff when bolt is tight Author: liam1988, Location: CornwallPosted: Thu Jun 04, 2015 2:19 pm ---- Hey guys, I thought I would change my caliper because it failed on a binded brake, When changing the caliper and putting the new caliper on I noticed that the old caliper slider pins were stiff as hell when the bolts into them are fully tight, but if I slightly loosen them they go back and forth as they should. The pins are all lubed up fine and not corroded. Anyone else have this problem? I thought maybe they could be slightly bent?
#2: Re: Caliper slider pin stiff when bolt is tight Author: Edward, Location: In the garagePosted: Thu Jun 04, 2015 3:27 pm ---- One of mine is like this so it's slightly harder to spin one wheel than the other. I can only assume it's slightly bent. A new slider might fix it.
#3: Re: Caliper slider pin stiff when bolt is tight Author: Timon2210, Location: PalestinePosted: Fri Jun 05, 2015 3:06 am ---- Everytime you replace the brake pads,the pins need to be cleaned and use silicone grease to lubricate it,and this will make the move smoother and easier
#4: Re: Caliper slider pin stiff when bolt is tight Author: liam1988, Location: CornwallPosted: Fri Jun 05, 2015 6:37 am ---- Thanks for the reply guys, ordered a new set of slider pins for the caliper.... praying this solves it..
Liam
#5: Re: Caliper slider pin stiff when bolt is tight Author: Edward, Location: In the garagePosted: Fri Jun 05, 2015 6:53 am ---- Mine are spotless with fresh grease and they are still stiff once tight.
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy
Membership:
Latest: 
New Today: 0
New Yesterday: 1
Overall: 17125
Online Now [49]:
Visitors: 48
Members: 0
Staff Online Now:
Page Views:
General
and easier 
