#1: Hazard light with central locking switch Author: RocknRolla_zg, Location: CroatiaPosted: Sun Oct 01, 2017 11:33 am ---- Hi, is it possible to fit and replace regular hazard light switch button with central locking and hazard light. Does it need pp for activation of locking ? Plus is there option for side lights to activate when you open door? Phase 2 model 2004
Thanks
#2: Re: Hazard light with central locking switch Author: gpvecchi, Location: ItalyPosted: Sun Oct 01, 2017 4:17 pm ---- Yes, you have to connect the button to the speedo (1 wire), update BSI and enable a couple of functions.
#3: Re: Hazard light with central locking switch Author: RocknRolla_zg, Location: CroatiaPosted: Mon Oct 02, 2017 12:35 pm ---- Thank you for the info vecchi.
#4: Re: Hazard light with central locking switch Author: gazza82, Location: South BucksPosted: Mon Oct 02, 2017 1:28 pm ---- Don't think that will operate the side-lights with the doors though ... just the hazards/central locking
#5: Re: Hazard light with central locking switch Author: MrBSI, Location: What's it to you? ? ?Posted: Mon Oct 02, 2017 2:09 pm ---- Older BSI software versions used to automatically activate the follow me home headlamp function if the light sensor ( if fitted ) detected it was dark.
Peugeot changed the feature due to complaints in the newer BSI software requiring the driver to operate the headlamp stalk every time they wished to trigger the follow me home headlamps.
Turn the ignition OFF & pull the headlamp stalk towards you ( as to flash the headlamps ) & the dipped beam will come on & stay on for 30 seconds.
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17111
Online Now [16]:
Visitors: 15
Members: 0
Staff Online Now:
Page Views:
General
