#1: 206 H4 To H7 Trouble shooting Author: Jamerz, Posted: Thu Oct 19, 2017 12:54 pm ---- I recently fitted H7 dual bulb headlamps as an upgrade from the H4 Single bulb. I plugged them into the H7 connectors that were thankfully fitted on my 52 plate before the face lift.
However when I put full beam on the dipped beam doesn't stay on, and visibility is poor. I was wondering if there is a fuse or relay that needs putting in or any wires need snipping and connecting to allow for both to come on at full beam?
#2: Re: 206 H4 To H7 Trouble shooting Author: southwestchap, Location: DevonPosted: Thu Oct 19, 2017 2:43 pm ---- in Peugeot planet you need to change the bulb type to twin (or something along those lines)
Had to do it on my 2002 HDi when fitting crystals.
#3: Re: 206 H4 To H7 Trouble shooting Author: Steve206, Location: UKPosted: Thu Oct 19, 2017 4:48 pm ---- Or change the light stalk to one from a multiplex car.
#4: Re: 206 H4 To H7 Trouble shooting Author: MrBSI, Location: What's it to you? ? ?Posted: Thu Oct 19, 2017 8:24 pm ----
Steve206 wrote:
Or change the light stalk to one from a multiplex car.
Stalks on multiplex are all the same, just a digital switch that sends a signal to the BSI unit.
BSI unit controls the headlight output.
It just needs BSI configuration set up changing from SINGLE OPTIC to DOUBLE OPTIC with Peugeot Planet / Diagbox.
#5: Re: 206 H4 To H7 Trouble shooting Author: Jamerz, Posted: Fri Oct 20, 2017 4:27 am ----
MrBSI wrote:
Steve206 wrote:
Or change the light stalk to one from a multiplex car.
Stalks on multiplex are all the same, just a digital switch that sends a signal to the BSI unit.
BSI unit controls the headlight output.
It just needs BSI configuration set up changing from SINGLE OPTIC to DOUBLE OPTIC with Peugeot Planet / Diagbox.
Lovely thanks for the reply, do you think that this could be done on one of those cheap ebay kits? or should I look for someone local that can do it for me?
#6: Re: 206 H4 To H7 Trouble shooting Author: Steve206, Location: UKPosted: Fri Oct 20, 2017 4:49 am ----
MrBSI wrote:
Steve206 wrote:
Or change the light stalk to one from a multiplex car.
Stalks on multiplex are all the same, just a digital switch that sends a signal to the BSI unit.
BSI unit controls the headlight output.
It just needs BSI configuration set up changing from SINGLE OPTIC to DOUBLE OPTIC with Peugeot Planet / Diagbox.
But if he's got a preplex car changing the stalk will work. Did on my old car.
#7: Re: 206 H4 To H7 Trouble shooting Author: MrBSI, Location: What's it to you? ? ?Posted: Fri Oct 20, 2017 6:35 am ---- Jamerz has a phase 1 multiplexed car so it needs the BSI config tweak to get the lights working correctly.
#8: Re: 206 H4 To H7 Trouble shooting Author: VorTechS, Location: Gloucestershire, UKPosted: Fri Oct 20, 2017 6:36 am ----
MrBSI wrote:
Steve206 wrote:
Or change the light stalk to one from a multiplex car.
Stalks on multiplex are all the same, just a digital switch that sends a signal to the BSI unit.
BSI unit controls the headlight output.
It just needs BSI configuration set up changing from SINGLE OPTIC to DOUBLE OPTIC with Peugeot Planet / Diagbox.
That option isn't available on all cars. Don't know if it's just missing for pre-plex or not. It's wasn't available for me anyway.
#9: Re: 206 H4 To H7 Trouble shooting Author: MrBSI, Location: What's it to you? ? ?Posted: Fri Oct 20, 2017 7:40 am ----
VorTechS wrote:
MrBSI wrote:
Steve206 wrote:
Or change the light stalk to one from a multiplex car.
Stalks on multiplex are all the same, just a digital switch that sends a signal to the BSI unit.
BSI unit controls the headlight output.
It just needs BSI configuration set up changing from SINGLE OPTIC to DOUBLE OPTIC with Peugeot Planet / Diagbox.
That option isn't available on all cars. Don't know if it's just missing for pre-plex or not. It's wasn't available for me anyway.
Pre plex wont have the option as the electrical system is different - pre plex you change the stalk.
I think a lot of people are getting confused between pre plex & multiplexed / phase 1 & phase 2.
#10: Re: 206 H4 To H7 Trouble shooting Author: VorTechS, Location: Gloucestershire, UKPosted: Fri Oct 20, 2017 8:43 am ----
MrBSI wrote:
I think a lot of people are getting confused between pre plex & multiplexed / phase 1 & phase 2.
Makes sense. I know there was a relay option touted a long time ago for pre-plex (I looked into it, but never got round to doing it), but I didn't know that pre-plex / multiplex stalks were inter-changable.
#11: Re: 206 H4 To H7 Trouble shooting Author: MrBSI, Location: What's it to you? ? ?Posted: Fri Oct 20, 2017 9:23 am ----
VorTechS wrote:
but I didn't know that pre-plex / multiplex stalks were inter-changable.
There not interchangeable.
Remember phase 1 cars came in both non plexed & multiplexed versions.
Phase 2 where all multiplexed.
#12: Re: 206 H4 To H7 Trouble shooting Author: gazza82, Location: South BucksPosted: Fri Oct 20, 2017 9:35 am ---- Not all the same either .. depends whether you have front fogs or not.
#13: Re: 206 H4 To H7 Trouble shooting Author: Steve206, Location: UKPosted: Fri Oct 20, 2017 11:07 am ---- I think my car may have been a crossover then. It came with h4 lights but I changed to crystals and changed the stalk
#14: Re: 206 H4 To H7 Trouble shooting Author: Jamerz, Posted: Fri Oct 20, 2017 11:19 am ----
MrBSI wrote:
Jamerz has a phase 1 multiplexed car so it needs the BSI config tweak to get the lights working correctly.
Thank you for telling me this, just trying to figure out how to tweak it, do you think a dealership would do it cheap? Or should I buy a Chinese PP2000 kit?
#15: Re: 206 H4 To H7 Trouble shooting Author: VorTechS, Location: Gloucestershire, UKPosted: Fri Oct 20, 2017 11:26 am ----
Jamerz wrote:
MrBSI wrote:
Jamerz has a phase 1 multiplexed car so it needs the BSI config tweak to get the lights working correctly.
Thank you for telling me this, just trying to figure out how to tweak it, do you think a dealership would do it cheap? Or should I buy a Chinese PP2000 kit?
There might be someone local to you who'd do it for you.
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17128
Online Now [263]:
Visitors: 262
Members: 0
Staff Online Now:
Page Views:
General
