#1: euro 206 build progress *SHELL PAINTED* PAGE 2 Author: andyeuro206, Location: motherwellPosted: Tue Feb 09, 2010 1:46 pm ---- hi there i thought i would start one of these up to show you guys my project what it has come form and what it looks like at the moment to what i want it to look like
so back in november 2008 with little money to replace my little saxo i cam across this a peugeot 206 1.4 lx which had seen better days the amount of rust mainly at the frount end was unreal so after comeing across a bonnet and some cheep and nasty alloys this is what it looked like.
i was going to have the bonnet painted and leave it like that but i got bored and decided to change it so next came the badgeless grill and smooth bonnet and another set of cheap and nasty wheels.
so after that haveing not decided to go euro as of yet i go some black lexarse lights , black fog light and a bi plane spoiler sorry about the crap photos here
so round about this time i joined a 206 forum and leared so much about 206's what kind of parts where avalible and that so my next buy was a set of phase 2 rear lights
and a pic of them fitted on the car
and them some phase 2 headlights
i have never fitted these to my car as of yet
so my next buy for the car was a roland garros interior which looks like this
so my next buy for this was some new wheels so after many hours of hunting ebay i got bored and ended up with these
they are peugeot 205 1.6 gti speedlines
at the same time i bought some cheep ass coilovers
so after fitting the coilovers and the wheels i decided it was about time to start my euro plans so i removed the bump strips on the side and smooth them off and this is what it looked like
so after seing this as you can tell the back is way to high so i had the torsion bar took down 60 mm and it now looks like this
so after haveing the garros interior in my car i noticed i didnt go with any of the gray door cards or that so i decided change was in order so i went and got some black door cards and fitted them
i am hopeing to get them re-trimed like these ones. theses are the ones that came with the interior but unfortunatly only fit 5 dr model of a 206
so now i have came to the stage of which i am at just now i have totally removed the frount end which i am repaceing with two front sports wings and a smoothed of frount bumper from a gti 180 also finishing off the smothing because as to date i have onli done the one side
so anyways thats it for now i hope ou enjoyed reading if you got this far and i will update it as much as possible
andyPAGE 2 Last edited by andyeuro206 on Tue May 18, 2010 1:29 pm; edited 6 times in total
#2: Re: euro 206 build progress Author: Ellis1612, Location: St.NeotsPosted: Tue Feb 09, 2010 1:49 pm ---- Looking good mate....Can see the potential in your project Keep it up
#3: Re: euro 206 build progress Author: PugJH, Location: NorthantsPosted: Tue Feb 09, 2010 1:54 pm ---- Hope your taking that spoiler off, else it won't be euro imo.
Could smooth on some kinda lip like spoiler make it look standard. might look good
You keeping the car the same colour?
The front bumper needs the recess smoothing, but i'd do what the other old boy did, and get a sport one and smooth that and the fogs out, altho i like the above from Rage's car.
#4: Re: euro 206 build progress Author: andyG, Location: Arbroath, ScotlandPosted: Tue Feb 09, 2010 2:26 pm ---- Andy, im still waiting for a reply from the transport museum, i dont think they want anything to do woth us.lol.
is taking shape gradually though
#5: Re: euro 206 build progress Author: Martynmofo, Location: York!Posted: Tue Feb 09, 2010 2:34 pm ---- That is looking realy good man!
some smidt th line's would look uber nice on your pug! www.potn.co.uk/waterma...25x425.jpg this is what id have if i euro'd my 206!
#6: Re: euro 206 build progress Author: andyeuro206, Location: motherwellPosted: Tue Feb 09, 2010 2:53 pm ---- i would love a set of rims like that but i am unemployed i shall be for the forseable future
#7: Re: euro 206 build progress Author: coopskin, Location: Hull, East YorkshirePosted: Wed Feb 10, 2010 11:33 am ---- you after an adapter from H4 to H7?
i think i have one at home
#8: Re: euro 206 build progress Author: paddy, Location: NewcastlePosted: Wed Feb 10, 2010 12:58 pm ---- 14" 1.6 205 gti speedlines are they what are on the car in the pics, if so, do they could as alloy wheels?
#9: Re: euro 206 build progress Author: Nimminz, Location: Durham, NE England, UKPosted: Sun Feb 21, 2010 10:09 am ---- yeah they do count as alloys i think. The 1.9 GTis i have are deffo.
car looks dead good, nice inspiration too
#10: Re: euro 206 build progress **PHOTO UPDATES** Author: andyeuro206, Location: motherwellPosted: Thu Mar 11, 2010 4:41 pm ---- picture update for anyone who is interested on how this is comeing along
#11: Re: euro 206 build progress **PHOTO UPDATES** Author: andyeuro206, Location: motherwellPosted: Fri Apr 02, 2010 4:00 pm ---- well since i last updated this i have rebuilt the o/s/r whell arch heres how it stands now
a lot more to follow these where the only pics i got tonight as the electircs in my guarage when pete tong will post up more when i sort out my little problem Last edited by andyeuro206 on Tue May 18, 2010 1:30 pm; edited 2 times in total
#12: Re: euro 206 build progress **PHOTO UPDATES** Author: andyeuro206, Location: motherwellPosted: Wed Apr 07, 2010 8:03 am ---- another little teaser of some pics more to follow as soon as i can be botherd to wal the 10 feet to tae some lol enjoy
its takeing shape very nicely what do you lot think comments welcome Last edited by andyeuro206 on Tue May 18, 2010 1:30 pm; edited 1 time in total
#13: Re: euro 206 build progress **PHOTO UPDATES** Author: sam-c, Location: Uni: Kent Home: ScunthorpePosted: Wed Apr 07, 2010 8:11 am ---- isit just me or can you see wehre the bump strip used to be? i do like the idea of smoothing these out though. are you smoothing over the door handles?
#14: Re: euro 206 build progress ***NEW PICS*** Author: andyeuro206, Location: motherwellPosted: Wed Apr 07, 2010 8:13 am ---- it sticks out like a sore thumb but after the paint is all on you will hardly notice it well atleast hope lol
#15: Re: euro 206 build progress ***NEW PICS*** Author: sam-c, Location: Uni: Kent Home: ScunthorpePosted: Wed Apr 07, 2010 8:22 am ---- hmm i always thought it would be quite easy to do but clearly not hope it looks alright though
#16: Re: euro 206 build progress *ShEeL pAiNtEd* page 2 Author: andyeuro206, Location: motherwellPosted: Wed Apr 07, 2010 8:28 am ---- it aint a easy task some off the lads off the site have seen this in person and you really cant nootice it inthem pics there is about 5 layers of high build primer so that wount be helping it much haha Last edited by andyeuro206 on Sun Apr 18, 2010 10:15 am; edited 3 times in total
#17: Re: euro 206 build progress ***NEW PICS*** Author: Brian, Location: VVT Land, FifePosted: Wed Apr 07, 2010 9:55 am ---- Could you not make the indent of where the side strips used to be more apparent? I think it looks nice - breaks up the panel a bit having the wee indentation.
Generally though - the bodywork is looking much better
#18: Re: euro 206 build progress ***NEW PICS*** Author: andyeuro206, Location: motherwellPosted: Sat Apr 17, 2010 1:12 pm ---- small update for you so on most of the pictures you see of my car you will notice that it is always the passengers side i dont know why this is and i have left it to late to get a pic of the drivers side all built up with out paint
so heres another pic of the passenger side
here we have a picture of the smooth roof in primer
here we have a picture of of the smooth doors off the car
and here is the shell from all diffrent angles
in that pic you will see the man who is resposible for all the body work and paint
so as i have wrote this up the shell has been painted i will get some pics of this tommorow
as well as the doors as they are being done tommorow aswell
hope yopu enjoy reading this
andy Last edited by andyeuro206 on Tue May 18, 2010 1:31 pm; edited 1 time in total
#19: Re: euro 206 build progress ***NEW PICS*** Author: Mitch, Location: ScotlandPosted: Sat Apr 17, 2010 4:29 pm ---- Looking good so far mate!
#20: Re: euro 206 build progress ***NEW PICS*** Author: SamanthRobyn, Location: sheffieldPosted: Sun Apr 18, 2010 5:18 am ---- im praying youve welded everything and not just fibreglasse and filled
#21: Re: euro 206 build progress ***NEW PICS*** Author: Zetec-s, Location: GlasgowPosted: Sun Apr 18, 2010 6:11 am ---- loving this project must see it in flesh
#22: Re: euro 206 build progress ***NEW PICS*** Author: andyeuro206, Location: motherwellPosted: Sun Apr 18, 2010 10:14 am ---- right folks as promised i have got some pictures of a painted sheel for you today
these arent the best as they where took oan my fone and the sun was being a a******e
but you can get the a idea of what its going to look like
next up are the doors and tailgate
hope you are enjoying the veiwing as much as i am enjoy watching my dream car come to life
thanks andy Last edited by andyeuro206 on Tue May 18, 2010 1:31 pm; edited 1 time in total
#23: Re: euro 206 build progress *SHELL PAINTED* PAGE 2 Author: Cr4zYb0y, Location: SalisburyPosted: Sun Apr 18, 2010 10:19 am ---- Is it me or can i slighty see where the bumpstrips were..?
#24: Re: euro 206 build progress *SHELL PAINTED* PAGE 2 Author: andyeuro206, Location: motherwellPosted: Sun Apr 18, 2010 10:27 am ---- yes you can but it brakes up the car so it dosent look like a bubble
plus to toatly get rid of them tou looking a a s**t load of filler
#25: Re: euro 206 build progress *SHELL PAINTED* PAGE 2 Author: Zetec-s, Location: GlasgowPosted: Sun Apr 18, 2010 1:19 pm ---- me likes:D
#27: Re: euro 206 build progress ***NEW PICS*** Author: andyeuro206, Location: motherwellPosted: Sun Apr 18, 2010 3:17 pm ----
SamanthRobyn wrote:
im praying youve welded everything and not just fibreglasse and filled
it is a mixture of both
i welded some small plases in and then buitl up the shape with a number of layers of fiberglass and body filler
#28: Re: euro 206 build progress *SHELL PAINTED* PAGE 2 Author: SamanthRobyn, Location: sheffieldPosted: Sun Apr 18, 2010 3:20 pm ---- o dear i can see this cracking lol personaly experience bf's car did this
why didnt u weld the bump strips they may crack
#29: Re: euro 206 build progress *SHELL PAINTED* PAGE 2 Author: andyeuro206, Location: motherwellPosted: Sun Apr 18, 2010 3:23 pm ---- becuse weleding them would lookk p**s you would never get the same affect i have one side filled for 6 months and its never cracked
#30: Re: euro 206 build progress *SHELL PAINTED* PAGE 2 Author: Mitch, Location: ScotlandPosted: Mon Apr 19, 2010 2:37 pm ---- Nice Andy, ill pop round and see it some time
#31: Re: euro 206 build progress *SHELL PAINTED* PAGE 2 Author: Aaronrussell1990, Location: Medway townsPosted: Mon Apr 19, 2010 2:42 pm ---- i like it not keen on the exhaust though mate looks like its going to be a sick car though.
#32: Re: euro 206 build progress *SHELL PAINTED* PAGE 2 Author: andyeuro206, Location: motherwellPosted: Mon Apr 19, 2010 2:54 pm ---- thats one fine exhaust i have on that to mate
ask an of the scottish members is a bad boy lol
but its like marmite you ether love it or hate it lol
#33: Re: euro 206 build progress *SHELL PAINTED* PAGE 2 Author: Mitch, Location: ScotlandPosted: Mon Apr 19, 2010 3:02 pm ---- Lets just say.... you can hear him from a fair distance away
#34: Re: euro 206 build progress *SHELL PAINTED* PAGE 2 Author: andyeuro206, Location: motherwellPosted: Mon Apr 19, 2010 3:03 pm ---- thanks for clearing that up mitch haha
#37: Re: euro 206 build progress *SHELL PAINTED* PAGE 2 Author: Zetec-s, Location: GlasgowPosted: Mon Apr 19, 2010 3:08 pm ---- mine used to b the same miss the wee red 1 lol out fighting with neighbours over it
#38: Re: euro 206 build progress *SHELL PAINTED* PAGE 2 Author: andyeuro206, Location: motherwellPosted: Mon Apr 19, 2010 3:10 pm ---- ooh the neighbours love me aswell suprised i dont actully have a asbo over it lol
#39: Re: euro 206 build progress *SHELL PAINTED* PAGE 2 Author: Nitrox121, Location: LancasterPosted: Mon Apr 19, 2010 3:12 pm ---- Looking good mate.any reason why you didnt go for a colour change?
#40: Re: euro 206 build progress *SHELL PAINTED* PAGE 2 Author: andyeuro206, Location: motherwellPosted: Mon Apr 19, 2010 3:14 pm ---- well i was planing to do it red but then i bought the roland garros interior for it
so it wouldnt match and a dont have the heart to part with my lovely seats so it sayed the same
looks like you have your work cut out with your project aswell
i thought i was the only one crazy enuff to do that amoutn of work on a car lol
#43: Re: euro 206 build progress *SHELL PAINTED* PAGE 2 Author: customized206, Location: EDINBURGHPosted: Mon Apr 19, 2010 3:28 pm ---- Tell me about it ....all my mates are big time v.dubbers i get the p**s ripted out me every day for modding a 206 lol
#44: Re: euro 206 build progress *SHELL PAINTED* PAGE 2 Author: andyeuro206, Location: motherwellPosted: Mon Apr 19, 2010 3:32 pm ---- haha well i dont have that problem as most of my mates are still into aww the chavvy mods and i cant save them from there ways
but on the other hand they are gonna make maine look better haha
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy
Membership:
Latest: 
New Today: 0
New Yesterday: 1
Overall: 17128
Online Now [62]:
Visitors: 61
Members: 0
Staff Online Now:
Page Views:
General
Keep it up
can hear him a good 4/5 min b4 u see him lol
miss the wee red 1 lol out fighting with neighbours over it 
