#1: Tomd0801754's WIP - Poppy 2.0HDi. Update on Page 8! Author: tomd0801754, Location: MoscowPosted: Wed Feb 10, 2010 2:38 pm ---- Ok. Decided that I shall redo this. 'because I am so cool!
Ok so I bought my baby - 2.0hdi - for £2200 in May '08 after deciding to go headbutting a '55 plate focus with a rover 214si... (Police verdict - 50/50)
She was bought standard and remained that way untill August 2009. Then I joined here.. Here is my first and last photo's of her like this..
First + second mod..
these stayed on for... not long.. They just didn't suit to be honest. Also side bump stips were done!
Front bump strip (and rear) done.. This photo is just back from the body shop after the front was covered hugely in stonechips!
Decided something was missing:
Oh, it's back again
with some:
Needed these I felt.. Black Zunsport grills all around!
Boredum called:
followed by some sexy looking things:
(well not right then)
(or then)
(or when I was trying to get the f***ers to work!)
This made up for it though!
Something was still missing though (apart from alloys)..
Then this arrived!
obv a short spray later:
andddddd........
voila!
Unfortuntely she failed her MOT.. due to a 2 and 1/2 inch hole halway down the center pipe.. so bye bye..
Once again, my knowledge of rear lights failed me..
*I think I have just sicked a little!*
So back off and back to the ole' phase 1's
Next I *cleverly* decided to drive Carlisle - Essex - Carlisle in a day.. was worth it though.. I picked up these bad boys..
Then came the decent rear lights!
And there she currently sat.. Untill January.
Hub caps go from:
to:
along with:
So from this:
to this:
in 6months
And I now also have some:
Colour coded handles
Gloss black Gti mirrors
and Red Calipers and Drums
I also currently have some newer photo's with alloys and other bits on just waiting for certain people to upload them! *Wagsy*
Much love! Last edited by tomd0801754 on Thu May 10, 2012 2:58 pm; edited 7 times in total
#2: Re: Tomd0801754's WIP Author: wagsy206, Location: Coatbridge, LanarkshirePosted: Wed Feb 10, 2010 2:43 pm ---- Tom, i uploaded my meet pictures lol. there in the scottish section.
ill post them in the meet pics section though
can i make love to you. i really want to.
#3: Re: Tomd0801754's WIP Author: tomd0801754, Location: MoscowPosted: Wed Feb 10, 2010 2:46 pm ---- To me or my car?
Either is fine!
#4: Re: Tomd0801754's WIP Author: navyraffles, Location: PlymouthPosted: Wed Feb 10, 2010 2:57 pm ---- awesome mate, amazing how much of a transformation she's made from standard! me personally, not quite so keen on the alloys as the rest of your mods; would maybe have chosen to get some black vortex's...
though i can't really say much as my beaut is still standard!
#5: Re: Tomd0801754's WIP Author: Mattie-RS, Location: A Track near you ;)Posted: Wed Feb 10, 2010 3:02 pm ---- Can i have your wheels
#6: Re: Tomd0801754's WIP Author: vanman_foci, Location: Barry, South WalesPosted: Wed Feb 10, 2010 3:03 pm ---- looks very nice. what a transformation. Sometimes u need to few set of light to get the right ones
#7: Re: Tomd0801754's WIP Author: M60SHW, Location: CarlislePosted: Wed Feb 10, 2010 3:14 pm ---- haha very nice bud havent seen you car latly think were gonna need a photo sesh haha you defo goin to the summer meet?
#9: Re: Tomd0801754's WIP Author: andyG, Location: Arbroath, ScotlandPosted: Thu Feb 11, 2010 7:19 pm ---- This looked really nice at the glasgow meet, good job
#10: Re: Tomd0801754's WIP Author: twed207, Location: borders, near carlisle.Posted: Thu Feb 11, 2010 7:25 pm ---- alloys really finish it off tom, is niiice!
#11: Re: Tomd0801754's WIP Author: Austin, Location: TelfordPosted: Fri Feb 12, 2010 5:01 am ---- Nice! love flamenco red, needs lowering and sports rear bumper to really finish it off.
#12: Re: Tomd0801754's WIP Author: GazRG, Location: Bournemouth/CardiffPosted: Sat Feb 13, 2010 6:31 pm ---- TRUE transformation! Love your car, the black-red colour scheme is simple but really works on your car. It does desperately need both lowering and a sports bumper though!
Awesome job mate.
#13: Re: Tomd0801754's WIP Author: coops180, Location: leicesterPosted: Sat Feb 13, 2010 6:41 pm ---- coming along nicely matey
#14: Re: Tomd0801754's WIP Author: tomd0801754, Location: MoscowPosted: Sat Feb 13, 2010 6:43 pm ---- Cheers buddy.. I need a photo day soon.. Hopefully before this Saturday! Get some decent pics with alloys and the likes on!
If anyone sees a bumper in a scrappy or somewhere in EKB give me a PM.
#15: Re: Tomd0801754's WIP Author: iainlovatt, Posted: Mon Mar 01, 2010 12:22 pm ---- car uis coming along very nicely!!
#16: Re: Tomd0801754's WIP Author: Devon-Derv, Location: Paignton, DevonPosted: Sat Mar 06, 2010 8:21 am ---- I love the red and black theme, the front end looks realy cool
#17: Re: Tomd0801754's WIP Author: Antix, Location: WorcesterPosted: Sat Mar 06, 2010 8:36 am ---- I approve TomD
Keep the thread updated with more mods!
#18: Re: Tomd0801754's WIP Author: tomd0801754, Location: MoscowPosted: Sun Mar 07, 2010 2:17 pm ----
#19: Re: Tomd0801754's WIP Author: tomd0801754, Location: MoscowPosted: Sun Mar 07, 2010 2:20 pm ---- Updated photo's above.
Soon to come:
Unique Cupra Splitter (206info sticker the front! )
Poss. lowered, depending on funds.
Intercooler.
Re-map.
Boost Gauge.
Sports Rear Bumper.
#20: Re: Tomd0801754's WIP Author: wagsy206, Location: Coatbridge, LanarkshirePosted: Sun Mar 07, 2010 2:26 pm ---- nice plans tom. cant wait to see the bad boy again............................ and the car of course
check my project page 3 woop!!!
#21: Re: Tomd0801754's WIP Author: rohinthe2oh, Location: Not of the hamPosted: Thu Mar 11, 2010 12:22 pm ---- i absolutely love this car!! lowering it on springs for the time being ftw
what does the de-cat sound like??
and have you got smoked fogs or are they just dark surrounds?
definitely going for the red and gloss black theme for my silver 206 after seeing this!
#22: Re: Tomd0801754's WIP Author: tomd0801754, Location: MoscowPosted: Thu Mar 11, 2010 12:31 pm ---- De-cat is lovely. Best £200 quid I have ever spent! (Its a full SS system)
Took the glass off and sprayed the insides black! :), then sealed them all back up!
#23: Re: Tomd0801754's WIP Author: tomd0801754, Location: MoscowPosted: Fri Apr 02, 2010 7:21 am ---- You said I did:
These turned up this week.. Fitting this week or next.
Got these parts for a grand total of £34.. A nice suprising bargain.
Boost gauge is soon on its way and will be fitted, but not wired into the system till the Intercooler.
Car also now has a gloss black centre console..
WITH...
An Ipod/iPhone dock.
#24: Re: Tomd0801754's WIP Author: pioneerSrt, Location: Poland / WalbrzychPosted: Fri Apr 02, 2010 8:31 am ---- As he painted front badge? at home because he wants to do the same
#25: Re: Tomd0801754's WIP Author: Bailey, Location: Finding Dr. RobotnikPosted: Fri Apr 02, 2010 8:51 am ---- Looking good mate.
#26: Re: Tomd0801754's WIP Author: Andy_VXR, Posted: Fri Apr 02, 2010 8:59 am ---- Need to do a rear disk conversion
#27: Re: Tomd0801754's WIP Author: tomd0801754, Location: MoscowPosted: Fri Apr 02, 2010 10:02 am ---- quote="pioneerSrt"]As he painted front badge? at home because he wants to do the same[/quote]
Yeah mate, I have. Simple to do.
Just sand the old one down with some 400 grit sand paper, smooth it with some 800/1200, then Primer, sand with 1200 grit sandpaper again, lightly! Then spray paint again, sanding each coat with 1200 grit sandpaper! then Laquer!
Andy_VXR wrote:
Need to do a rear disk conversion
Wanna tell me how? or even better come and do it
#28: Re: Tomd0801754's WIP Author: pioneerSrt, Location: Poland / WalbrzychPosted: Fri Apr 02, 2010 10:12 am ---- Seriously because I like it but spray or brush done.
And I request you describe how is it done?
#29: Re: Tomd0801754's WIP Author: tomd0801754, Location: MoscowPosted: Fri Apr 02, 2010 10:18 am ---- SPRAY! Using rattle cans, not proffesionally. But DO NOT brush anything on your car! Lol, it won't look nice!
Remove the badge from the car.
Just sand it down with some 400 grit sand paper (to remove the chrome finish), smooth it with some 800/1200. Then the finish will be beautiful.
Primer it and Lightly sand it with some 1200 grit sandpaper
The choose your colour and spray it. Sanding each coat with 1200 grit sandpaper!
Then laquer it to stop it from peeling.
#30: Re: Tomd0801754's WIP Author: Andy_206, Location: birminghamPosted: Fri Apr 02, 2010 10:22 am ---- loooks very nice !!
spesh with the alloys !!
archs and lowered and it would be booom ting
#31: Re: Tomd0801754's WIP Author: huzzy4, Location: brockenhurstPosted: Wed Apr 07, 2010 5:25 pm ---- how much was the exhaust system? personally i think the only thing left to do on your car is get the windows tinted and then it would be done
#32: Re: Tomd0801754's WIP Author: tomd0801754, Location: MoscowPosted: Wed Apr 07, 2010 5:29 pm ---- £200 ish.. For the full Stainless Steel Decat with new silencer/tailpipe etc.
Tints.. Dont think it would suit it tbh..
#33: Re: Tomd0801754's WIP Author: no_offences, Location: LeedsPosted: Wed Apr 07, 2010 5:38 pm ---- the first pic reminds me of my old lx when i first got it, you dont realise how s**t they look standard until you have modded the hell outta them lol nice car, my fav bit is the black sprayed fogs im pinching your idea now lol
#34: Re: Tomd0801754's WIP Author: no_offences, Location: LeedsPosted: Wed Apr 07, 2010 5:39 pm ---- and tintis would mate you have a red black theme going i think some rear tints would suit nicely
#35: Re: Tomd0801754's WIP Author: tomd0801754, Location: MoscowPosted: Wed Apr 07, 2010 5:40 pm ---- Yeah, I used to think it looked gorgeous untill I seen a start and current photo
Haha, I'm sure I got a how-to from here.. I think.. Meh, its all good to share!
#36: Re: Tomd0801754's WIP Author: huzzy4, Location: brockenhurstPosted: Wed Apr 07, 2010 5:41 pm ---- not to bad where from?
Only have shops in Carlisle and Workington/Whitehaven.
#38: Re: Tomd0801754's WIP Author: huzzy4, Location: brockenhurstPosted: Wed Apr 07, 2010 5:44 pm ---- was it custom made or is it just an aftermarket? Last edited by huzzy4 on Wed Apr 07, 2010 5:45 pm; edited 1 time in total
#40: Re: Tomd0801754's WIP Author: huzzy4, Location: brockenhurstPosted: Wed Apr 07, 2010 5:46 pm ---- how long did it take them to make it?
#41: Re: Tomd0801754's WIP Author: huzzy4, Location: brockenhurstPosted: Wed Apr 07, 2010 5:47 pm ---- sorry for the interagation i want a powerflow exhuast
#42: Re: Tomd0801754's WIP Author: tomd0801754, Location: MoscowPosted: Wed Apr 14, 2010 5:10 pm ---- Less than 2 hours! Think I dropped it at two and got a phonecall around 4 saying it was ready to pick up.
Less than 2 hours! Think I dropped it at two and got a phonecall around 4 saying it was ready to pick up.
should have said. I could give LongLife discount
Just noticed this.. meh, I got it custom made with Lifetime warranty. Will bear it in mind for future though!
#47: Re: Tomd0801754's WIP UPDATE: Pg 3 Author: haz_XSI, Location: Sheffield/Rotherham, South YorkshirePosted: Thu Apr 15, 2010 4:58 am ---- Looks good mate! i agree on the tints thought but its personal preference
#49: Re: Tomd0801754's WIP UPDATE: Pg 3+4 Author: tomd0801754, Location: MoscowPosted: Fri Apr 16, 2010 12:06 pm ---- So we started like this:
and now look like this:
Woop woop 1000 Views
#50: Re: Tomd0801754's WIP UPDATE: Pg 3+4 Author: andre206, Posted: Fri Apr 16, 2010 12:10 pm ---- where did you get all your red trim from? Really want some in green! Did you paint it? Nice looking car.
#51: Re: Tomd0801754's WIP UPDATE: Pg 3+4 Author: tomd0801754, Location: MoscowPosted: Fri Apr 16, 2010 12:12 pm ---- What do you mean by trim? Like the door rubstips and bumper rubstrips?
#52: Re: Tomd0801754's WIP UPDATE: Pg 3+4 Author: andre206, Posted: Fri Apr 16, 2010 12:15 pm ---- Yeh, all the door strips, the bumper blacks...
Thanks. Shame i've got metallic paint, not as easy to get right. May give it a go tho!
#55: Re: Tomd0801754's WIP UPDATE: Pg 3+4 Author: JordGJ, Location: Leeds / West MidlandsPosted: Fri Apr 16, 2010 12:25 pm ---- Looks great mate 100x better just lower it now!!
#56: Re: Tomd0801754's WIP UPDATE: Pg 3+4 Author: Andrew, Location: Black Country Ay IPosted: Fri Apr 16, 2010 12:32 pm ---- phase two rear lights win
better than any aftermarkets for the 206 in my opinion
#57: Re: Tomd0801754's WIP UPDATE: Pg 3+4 Author: BrEvY, Location: WiganPosted: Fri Apr 16, 2010 3:12 pm ---- looking good tom.. ph2 boot strip makes one hell of a difference.. best cheap simple mod any one can do in my eyes!!
Have you got a tinted fog light?? would it not look better with a standard one in??
#58: Re: Tomd0801754's WIP UPDATE: Pg 3+4 Author: coxyo6, Location: South WalesPosted: Fri Apr 16, 2010 3:51 pm ---- got to be said what a differents from when you 1st had it. and the paint looks so good for a y reg car! v impressive! i love it
#59: Re: Tomd0801754's WIP UPDATE: Pg 3+4 Author: Nimminz, Location: Durham, NE England, UKPosted: Sat Apr 17, 2010 1:24 am ---- looking good mate!
front end looks mean
#60: Re: Tomd0801754's WIP UPDATE: Pg 3+4 Author: tomd0801754, Location: MoscowPosted: Sun Apr 18, 2010 10:43 am ----
snow_n_low wrote:
Looks great mate 100x better just lower it now!!
Next Weekend hopefully!
Andrewxps wrote:
phase two rear lights win
better than any aftermarkets for the 206 in my opinion
Never agreed untill I put these on! I love them now.
BrEvY wrote:
looking good tom.. ph2 boot strip makes one hell of a difference.. best cheap simple mod any one can do in my eyes!!
Have you got a tinted fog light?? would it not look better with a standard one in??
Hehe, btw the Ph2 washer jets where a steal from the Scrappies in Newton, up near Haydock.
Yeah, I think it breaks up the red tone from the back.. However, I might swap them over and have a look when I can next be bothered!
coxyo6 wrote:
got to be said what a differents from when you 1st had it. and the paint looks so good for a y reg car! v impressive! i love it
The Paint was starting to fade when I first got it.. Esp the roof and tailgate. Much love has gone into it (and cleaning sessions! ) I gotta admit, I am also very impressed with the cond. of the paint. If it didn't have the plates on, I think many people would guess that it was newer than it is!
Nimminz wrote:
looking good mate!
front end looks mean
#61: Re: Tomd0801754's WIP UPDATE: Pg 3+4 Author: andyeuro206, Location: motherwellPosted: Sun Apr 18, 2010 10:46 am ---- looking good mate what a transformation you have done keep it up mate
#62: Re: Tomd0801754's WIP UPDATE: Pg 3+4 Author: C4RLO5, Location: CumbriaPosted: Sun Apr 18, 2010 12:01 pm ---- looks good mate, no doubt ill see it about
#63: Re: Tomd0801754's WIP UPDATE: Pg 3+4 Author: Austin, Location: TelfordPosted: Sun Apr 18, 2010 1:58 pm ---- Really like this mate, nice and subtle, not OTT. B)
Hehe, btw the Ph2 washer jets where a steal from the Scrappies in Newton, up near Haydock.
Yeah, I think it breaks up the red tone from the back.. However, I might swap them over and have a look when I can next be bothered!
AHH dam you lol!!!! what scrappies is this?? tel me more probably be nothing left for me but still id like to know where it is
And yeah you maybe right about the fog actualy.. might look to red with a standard one in
#65: Re: Tomd0801754's WIP UPDATE: Pg 3+4 Author: Anony-X, Location: NorwichPosted: Mon Apr 19, 2010 1:53 pm ---- custom plates and your could easily tell me that was an 05. Paints kept beautifully for the age, cant tell the difference between that and my KKN.
custom plates and your could easily tell me that was an 05. Paints kept beautifully for the age, cant tell the difference between that and my KKN.
Great Work, truley. Been done properly.
Just seen this.. I am blushing.. Haha, this is why I Mod, huge sense of acheivement at the moment.
#67: Re: Tomd0801754's WIP UPDATE: Pg 3+4 Author: C4RLO5, Location: CumbriaPosted: Fri Apr 30, 2010 9:59 am ---- seen the car last week on hardwich circus roundabout, looked good matey
#68: Re: Tomd0801754's WIP UPDATE: Pg 3+4 Author: NorthantsBen, Location: Raunds, NorthamptonshirePosted: Tue May 25, 2010 8:45 am ---- Any lowerd pics yet?
#69: Re: Tomd0801754's WIP UPDATE: Pg 3+4 Author: tomd0801754, Location: MoscowPosted: Sun Jun 06, 2010 4:21 pm ---- I do mate.. They shall be up tomorrow. However, I need to buy some spacers to lower the front a bit more. As the front is currently sitting a bit higher than the back, but the 'winder plate thing' catches the tyres if wound too low and will cause serious gauging and probs. a blow out.
She also now has wind deflectors and a K and N Filter. (Cheers Si )
Was hoping to have the intercooler done in a few weeks. But not looking likely.. As I am moving house and money is very tight.
#70: Re: Tomd0801754's WIP UPDATE: Pg 3+4 Author: M60SHW, Location: CarlislePosted: Sun Jun 06, 2010 4:29 pm ---- can vouch its an amazing red and the condition is staggering for its age even when driveing with and in it you would never know it was a y reg and i can tell you alot and a mean alot of time and money has gone into it ....(bloody students!) lmao
#71: Re: Tomd0801754's WIP UPDATE: Pg 3+4 Author: ExoVyper, Location: Waiting for the tugboats to push me into port (Whitehaven)Posted: Sun Jun 06, 2010 4:42 pm ----
tomd0801754 wrote:
I do mate.. They shall be up tomorrow. However, I need to buy some spacers to lower the front a bit more. As the front is currently sitting a bit higher than the back, but the 'winder plate thing' catches the tyres if wound too low and will cause serious gauging and probs. a blow out.
She also now has wind deflectors and a K and N Filter. (Cheers Si )
Was hoping to have the intercooler done in a few weeks. But not looking likely.. As I am moving house and money is very tight.
nice to see my bits are going to good use
#72: Re: Tomd0801754's WIP UPDATE: Pg 3+4 Author: tomd0801754, Location: MoscowPosted: Sun Jun 20, 2010 8:09 pm ---- Ok, so here are some of the photos of it Lowered (well mostly, the front still needs dropped a wee bit, awaiting spacers for this)... She also now has Wind Deflectors and a K&N Panel Filter.
The Arches are also now on.
Whats coming soon do I hear you ask?
Hopefully in the next month or two, I shall be able to afford the FMIC, piping and remap! The 2 406 pipes are sat here tormenting me everyday it goes on!
Cupra Splitter with 206info Sticker. (Then the body work is finished!! )
Then that may well be the finished Poppy.. Maybe. I have more ideas but affordability then comes into play.
#73: Re: Tomd0801754's WIP UPDATE: Pg 5 Author: tomd0801754, Location: MoscowPosted: Sun Jun 20, 2010 8:15 pm ---- Aug 09:
June 10:
#74: Re: Tomd0801754's WIP UPDATE: Pg 5 Author: rttam, Location: devonPosted: Mon Jun 21, 2010 12:15 pm ---- looks awesome mate one of my favourite 206's on here
#75: Re: Tomd0801754's WIP UPDATE: Pg 5 Author: [-Jebus-], Location: CarlislePosted: Mon Jun 21, 2010 12:19 pm ---- nice to see it with the arches on mate :D...
i'd buy this off you anyday like haha.. stupidly good condition for its age
#76: Re: Tomd0801754's WIP UPDATE: Pg 5 Author: JDave, Location: Airdrie, ScotlandPosted: Mon Jun 21, 2010 1:11 pm ---- Pleased to see the arches went on ok and they look perfect after all your trouble.
Car is looking great. Love what youv done with it.
#77: Re: Tomd0801754's WIP UPDATE: Pg 5 Author: tomd0801754, Location: MoscowPosted: Mon Aug 30, 2010 4:17 pm ---- Here are some nice new washing photo's.. However scroll down to see the new updates!
Mirror Shine!!
And the new update you ask? THE INTERCOOLER IS ON!
After 8 hours (well 6 after breaks), lots of swear words, cutting, sore fingers and some nervy moments witha grinder on the car... We have:
#79: Re: Tomd0801754's WIP. Special Update Page 6! :) Author: twed207, Location: borders, near carlisle.Posted: Mon Aug 30, 2010 4:30 pm ---- very good tomD!
when's the pipeing going in? lol. what size is the IC and where'd you get it from?
xx
#80: Re: Tomd0801754's WIP. Special Update Page 6! :) Author: tomd0801754, Location: MoscowPosted: Mon Aug 30, 2010 4:37 pm ---- Euro - Thanks mate!
Tweddles - Piping is more than likely gonna be 2 weeks yesterday due to not actually ordering that, the boost gauge, new horns, bleed valve or anything else yet! Hahaaaa. Intercooler was from Intercooler-King on the Bay of the E, cost £60 as I contacted him outside of ebay so he didnt pay any fees. Its 695x180x65 with 65mm outlets.
#81: Re: Tomd0801754's WIP. Special Update Page 6! :) Author: Danny., Location: PeterboroughPosted: Mon Aug 30, 2010 4:53 pm ---- Mate your car looks awesome!
Quick question where did you buy your paint and is there anyway i can tell what colour mine is Wanting to CC It.
#82: Re: Tomd0801754's WIP. Special Update Page 6! :) Author: tomd0801754, Location: MoscowPosted: Mon Aug 30, 2010 5:02 pm ---- Paint was bought from Halfords. And your colour code is inside your drivers door on a wee sticker under the door catch. Its always three letters.
#83: Re: Tomd0801754's WIP. Special Update Page 6! :) Author: Danny., Location: PeterboroughPosted: Mon Aug 30, 2010 5:04 pm ---- Deffo gunna have to check that tomorrow. Did you follow any Tutorials when CC or experience.
Thanks
#84: Re: Tomd0801754's WIP. Special Update Page 6! :) Author: tomd0801754, Location: MoscowPosted: Mon Aug 30, 2010 5:06 pm ---- The how-to's on here mate!
#85: Re: Tomd0801754's WIP. Special Update Page 6! :) Author: Danny., Location: PeterboroughPosted: Mon Aug 30, 2010 5:17 pm ---- Was just about to check those and fell across someones Mk2 Golf Project :L
#86: Re: Tomd0801754's WIP. Special Update Page 6! :) Author: AusScare, Location: Brisbane, AustraliaPosted: Mon Aug 30, 2010 9:01 pm ---- Car looks good, how much has it been lowered front and back?
#87: Re: Tomd0801754's WIP. Special Update Page 6! :) Author: davek, Location: SouthamptonPosted: Tue Aug 31, 2010 2:03 am ---- Nice Tom, very shiny! Love the coloured fan, nice touch.
#88: Re: Tomd0801754's WIP. Special Update Page 6! :) Author: jase123, Location: yorkshirePosted: Tue Aug 31, 2010 10:09 am ---- loooks amaxing mate, is your back box out of line just a bit tho? or is it the photo? anyhow amazing
#89: Re: Tomd0801754's WIP. Special Update Page 6! :) Author: tomd0801754, Location: MoscowPosted: Tue Aug 31, 2010 10:11 am ---- AusScare- Front and Back, not a clue! Haha, Was meant to be 40 however back looks a little lower.
Davek- Thanks, was about to get a black one then this came up on auction on eBay.
Also, its booked in for a remap at Leeds RS on the 7th October! Hopefully piping and everything else will be done by then.
#90: Re: Tomd0801754's WIP. Special Update Page 6! :) Author: twed207, Location: borders, near carlisle.Posted: Tue Aug 31, 2010 10:32 am ---- did you get the TDOC discount tom?
#91: Re: Tomd0801754's WIP. Special Update Page 6! :) Author: tomd0801754, Location: MoscowPosted: Tue Aug 31, 2010 11:05 am ---- Indeed I did Twed! Did you?
#92: Re: Tomd0801754's WIP. Special Update Page 6! :) Author: twed207, Location: borders, near carlisle.Posted: Tue Aug 31, 2010 11:06 am ---- yup!
need to speak to you btw. when you next on MSN?
#93: Re: Tomd0801754's WIP. Special Update Page 6! :) Author: NorthantsBen, Location: Raunds, NorthamptonshirePosted: Tue Aug 31, 2010 11:16 am ---- looks smart
i like it
keep up the good work
#94: Re: Tomd0801754's WIP. Special Update Page 6! :) Author: Kencoboy, Location: Pembrokeshire, WalesPosted: Wed Sep 01, 2010 8:27 am ---- Looking good tom
#95: Re: Tomd0801754's WIP. Special Update Page 6! :) Author: Lecktorious, Location: ScotlandPosted: Wed Sep 01, 2010 10:59 am ---- You have a handbrake cable that need sorting
#96: Re: Tomd0801754's WIP. Special Update Page 6! :) Author: tomd0801754, Location: MoscowPosted: Wed Sep 01, 2010 11:03 am ---- How the HELL did you spot that?!
Just been and sorted it now, cheers!
#97: Re: Tomd0801754's WIP. Special Update Page 6! :) Author: Lecktorious, Location: ScotlandPosted: Wed Sep 01, 2010 11:09 am ----
tomd0801754 wrote:
How the HELL did you spot that?!
Just been and sorted it now, cheers!
I have an eye for detail
Glad it's sorted
#98: Re: Tomd0801754's WIP. Special Update Page 6! :) Author: tomd0801754, Location: MoscowPosted: Wed Sep 01, 2010 11:11 am ----
G. wrote:
tomd0801754 wrote:
How the HELL did you spot that?!
Just been and sorted it now, cheers!
I have an eye for detail
Glad it's sorted
It had just come out of its clip. Cheers G.
#99: Re: Tomd0801754's WIP. Special Update Page 6! :) Author: Baz206, Location: InvernessPosted: Wed Sep 01, 2010 11:16 am ---- Where did you get the ipod dock from matey ,
ps Car looking well schweet !!!
#100: Re: Tomd0801754's WIP. Special Update Page 6! :) Author: tomd0801754, Location: MoscowPosted: Wed Sep 01, 2010 11:29 am ---- Made it fella!
#101: Re: Tomd0801754's WIP. Special Update Page 6! :) Author: tomd0801754, Location: MoscowPosted: Sun Feb 27, 2011 9:02 am ---- Well, I haven't updated this for a while, however...there shall be some new photo's coming this week at somepoint.. To give you a taster, this is part of a clay bar from cleaning JUST the drivers side door, UNDER the bumpstrip, so not even the whole door....
However, since last updated the FMIC is fully plumbed in and a brand new turbo has been fitted.. Due to a bit of a mishap with the last one.
She needs a fair wack of TLC atm as a bad few months has meant her getting neglected. She needs:
A new front badge spraying
New spoiler,
Respray on the front bumper (poss)
Fan wiring up
Respray of the morettes
HIDS and rewiring of the morettes as having an issue with the drivers side full beam
Re-map to get the full power potential out of her.
However.. Watch this space for new photo's later this week.
#102: Re: Tomd0801754's WIP. Special Update Page 6! :) Author: Quarmbo, Location: Bristol & LeicesterPosted: Tue Mar 15, 2011 8:19 am ---- Anymore updates? About time you took it to RStuning don't you think?!
#103: Re: Tomd0801754's WIP. Special Update Page 6! :) Author: Dillon, Location: KentPosted: Tue Mar 15, 2011 8:36 am ----
Quarmbo wrote:
Anymore updates? About time you took it to RStuning don't you think?!
#104: Re: Tomd0801754's WIP. Special Update Page 6! :) Author: tomd0801754, Location: MoscowPosted: Fri Mar 18, 2011 12:42 pm ---- Unfortunately Sam (and Dillion) personal issues, University work and a lack of money has held it up. I was £50 away from having the money for a re-map and my laptop decided it wanted to try some Rosé wine, setting me back another £200.
I am hoping to be able to take her for a quick photoshoot either tomorrow or Sunday.. however just waiting for a few weeks before anything is sorted or new things bought.
#105: Re: Tomd0801754's WIP. Special Update Page 6! :) Author: Harry, Location: StaffordPosted: Fri Mar 18, 2011 1:27 pm ---- I've always been jealous Tom, it's so purrrty
#106: Re: Tomd0801754's WIP. Special Update Page 6! :) Author: tomd0801754, Location: MoscowPosted: Sat Jul 09, 2011 12:23 pm ---- A few tiny updates....
Many more to come in the next few days Actually about 4 mini updates to come over the next week IIRC, plus a phtoshoot and detail to come
This is to be installed in the upcoming day ot two
#110: Re: Tomd0801754's WIP. Update on Page 7! :) Author: Callum206, Location: West SussexPosted: Fri Jul 22, 2011 10:39 am ---- Love this car so much
#111: Re: Tomd0801754's WIP. Update on Page 7! :) Author: marc206, Location: Bourne, LincsPosted: Fri Oct 14, 2011 11:46 am ---- Thinking of getting my morettes painted to black instead of red as i like the look of yours Which paint did you use?
#112: Re: Tomd0801754's WIP. Update on Page 7! :) Author: DMA24, Location: LlantrisantPosted: Fri Oct 14, 2011 11:50 am ---- Stunning car!
#113: Re: Tomd0801754's WIP. Update on Page 7! :) Author: twitch169, Location: lincolnPosted: Fri Dec 30, 2011 9:58 am ---- I love this car mine is simlar just want some morret lights black roof and spoiler and gloss black side strips and bumper bits
#114: Re: Tomd0801754's WIP. Update on Page 7! :) Author: Robbence, Location: LowestoftPosted: Mon Jan 09, 2012 7:09 am ---- How much is it lowered front and back? ive got 40mm on front and back and the back is fine but the fronts so high!
#115: Re: Tomd0801754's WIP. Update on Page 7! :) Author: seanbmx, Location: farlington, portsmouthPosted: Mon Jan 09, 2012 1:07 pm ---- looking good, loving the red grab handles
#116: Re: Tomd0801754's WIP. Update on Page 7! :) Author: tomd0801754, Location: MoscowPosted: Thu May 10, 2012 2:57 pm ---- Well.. it has been a while since I have updated this...
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17139
Online Now [511]:
Visitors: 511
Members: 0
Staff Online Now:
Page Views:
General
'because I am so cool! 
haha you defo goin to the summer meet?
Mirror Shine!! 
