|
Author
|
Message |
|
|
 Posted: Sat Dec 03, 2011 10:24 am |
|
|
|
|
Joined: Feb 11, 2010
Posts: 209
Trade Rating: +1
Location: Belfast
|
 |
went 2 move my passenger seat back and it wont move..pulled bar up and wont move at all..its as if there is something blocking the seat from moving in the runner..the seat is pushed up as far as it can go so pretty much u are sitting on the dash!! cant even take the front seat bolts out as seat is covering them
anyone else had this problem or no whats wrong??
cheers
| |  |
|
|
 |
|
|
|
|
|
|
Posted: Sat Dec 03, 2011 10:45 am |
|
|
|
|
Joined: Nov 13, 2011
Posts: 24
Trade Rating: 0
Location: UK
|
|
Is it 3 or 5 door?
If I remember right, the runners are independent linked by the release handle, so i dont think its something in the runner or the seat would "crab" (move slightly on one side as the seat flexes).
Your gonna have to get under the seat with a torch, possibly disconnect the release bar from each of the runners (held with spring clip i think)and try to manuallly operate the slides until the seat is far enough back to get to the bolts to take the seat out.
On 3 dr, there is a memory mechanism at the rear of either or both rails, have a look at that, it may have jammed.
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Sat Dec 03, 2011 10:50 am |
|
|
|
|
Joined: May 13, 2010
Posts: 603
Trade Rating: +37
Location: Dorchester, Dorset
|
|
get some wd40 on the main opperating parts first of all, pump the seat right up get underneath and try and see what exactly isnt releasing or is preventing it from moving!
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Sat Dec 03, 2011 11:47 am |
|
|
|
|
Joined: Apr 30, 2011
Posts: 1676
Trade Rating: +46
Location: durham
|
|
as above ...
| | |
|
|
|
|
|
WARNING: This User Has Had Bad Trade Feedback In The Past
|
|
|
|
|
|
|
Posted: Sat Dec 03, 2011 11:56 am |
|
|
|
|
Joined: Feb 11, 2010
Posts: 209
Trade Rating: +1
Location: Belfast
|
|
| DavidPCoates wrote: |
Is it 3 or 5 door?
If I remember right, the runners are independent linked by the release handle, so i dont think its something in the runner or the seat would "crab" (move slightly on one side as the seat flexes).
Your gonna have to get under the seat with a torch, possibly disconnect the release bar from each of the runners (held with spring clip i think)and try to manuallly operate the slides until the seat is far enough back to get to the bolts to take the seat out.
On 3 dr, there is a memory mechanism at the rear of either or both rails, have a look at that, it may have jammed. |
yea its a 3 door..so take the spring out and c what happens
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Sat Dec 03, 2011 12:15 pm |
|
|
|
|
Joined: Feb 07, 2010
Posts: 5575
Trade Rating: +33
Location: Moscow
|
|
First sit in the seat and rock back and forth, whilst lifting the bar. Repeat a few times. Mine likes to jam every now and then.
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Sat Dec 03, 2011 12:21 pm |
|
|
|
|
Joined: Feb 11, 2010
Posts: 209
Trade Rating: +1
Location: Belfast
|
|
| tomd0801754 wrote: |
| First sit in the seat and rock back and forth, whilst lifting the bar. Repeat a few times. Mine likes to jam every now and then. |
been doing that but nothing seems to happen
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Sat Dec 03, 2011 12:40 pm |
|
|
|
|
Joined: Feb 07, 2010
Posts: 13077
Trade Rating: +65
Location: England
|
|
Did you make sure the bolts were fully screwed in?
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Sat Dec 03, 2011 12:45 pm |
|
|
|
|
Joined: Feb 11, 2010
Posts: 209
Trade Rating: +1
Location: Belfast
|
|
| Lee wrote: |
| Did you make sure the bolts were fully screwed in? |
yea fully tightened
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Sat Dec 03, 2011 12:50 pm |
|
|
|
|
Joined: Feb 07, 2010
Posts: 2720
Trade Rating: +6
Location: UK
|
|
Check for a little metal thing in between the runners. I dont know what it does, but something to do with locking the seats in position, sometimes sticks.
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Sun Dec 04, 2011 11:25 am |
|
|
|
|
Joined: Feb 11, 2010
Posts: 209
Trade Rating: +1
Location: Belfast
|
|
| Steve206 wrote: |
| Check for a little metal thing in between the runners. I dont know what it does, but something to do with locking the seats in position, sometimes sticks. |
cant see the bit of metal it must b in the part of the runner thats under the seat
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Sun Dec 04, 2011 11:43 am |
|
|
|
|
Joined: Feb 07, 2010
Posts: 2874
Trade Rating: +4
Location: Chichester, Sussex
|
|
Use some brute force, Pug fixed mine FOC in ten minutes.
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Sun Dec 04, 2011 1:33 pm |
|
|
|
|
Joined: Oct 05, 2011
Posts: 672
Trade Rating: +2
Location: Notts
|
|
get under it with a screwdriver and lift the release up, same s**t happened on mine it locked up when i moved it all the way forward
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Sun Dec 04, 2011 1:36 pm |
|
|
|
|
Joined: Feb 11, 2010
Posts: 209
Trade Rating: +1
Location: Belfast
|
|
| burge564 wrote: |
| get under it with a screwdriver and lift the release up, same s**t happened on mine it locked up when i moved it all the way forward |
the bit in the runner?
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Sun Dec 04, 2011 1:36 pm |
|
|
|
|
Joined: Feb 11, 2010
Posts: 209
Trade Rating: +1
Location: Belfast
|
|
| Ali_H wrote: |
| Use some brute force, Pug fixed mine FOC in ten minutes. |
did they say what the problem was
| | |
|
|
|
|
|
|
|
|
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17130
Online Now [42]:
Visitors: 42
Members: 0
Staff Online Now:
Page Views:
General
Forums Home
Forum FAQ
Search
york 16,3
