|
Author
|
Message |
|
|
 Posted: Wed Dec 14, 2011 2:29 am |
|
|
|
|
Joined: Aug 08, 2010
Posts: 41
Trade Rating: 0
Location: Suffolk
|
 |
Hi all,
I wonder if anyone can help.
My 1.9d will not start this morning. It cranks away and fuel is being pumped through - I can smell it.
My main suspicion is the glow plugs aren't turning on. The light on the dashboard has never turned on! Even when it was below 0 outside.
I tried scanning the ecu with a pug scantool but it said the obd port was dead.
I've read around on the net and there were a few threads about the ECU multi function relay dying and taking out the rev counter (which doesn't work), the glow plug relay drive and the obd port power feed. All sounds likely. I've bought one, but can't fit it as I can't find it on the car. In fact, I can't even find an ECU.
Any ideas?
Thanks,
Glen.
| |  |
|
|
 |
|
|
|
|
|
|
Posted: Wed Dec 14, 2011 2:36 am |
|
|
|
|
Joined: Feb 07, 2010
Posts: 5575
Trade Rating: +33
Location: Moscow
|
|
Does it turn over?
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Wed Dec 14, 2011 2:43 am |
|
|
|
|
Joined: Dec 16, 2010
Posts: 1533
Trade Rating: +10
Location: UK
|
|
| wurlyvalve wrote: |
| It cranks away. |
| | |
|
|
|
|
 | |  |
| Please Dont take any of my posts as written fact. They are simply my opinion and although to the best of my knowledge true, the information within them may well be incorrect.
Any work you undertake as a result of my posts is done so at your own risk  | |
 | |  |
|
|
|
|
|
|
|
Posted: Wed Dec 14, 2011 2:47 am |
|
|
|
|
Joined: Aug 08, 2010
Posts: 41
Trade Rating: 0
Location: Suffolk
|
|
lol. The starter is spinning the crank fine.
It looks like I have fuel pressure - I think this because the fuel lines to the injectors are weeping fuel. So I'm not (yet) thinking it is the fuel imobiliser issue.
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Wed Dec 14, 2011 3:13 am |
|
|
|
|
Joined: Feb 07, 2010
Posts: 5575
Trade Rating: +33
Location: Moscow
|
|
| MrrNoName wrote: |
| wurlyvalve wrote: |
| It cranks away. |
|
Shush you. 
Does it crack consistently or die off (ie definately not just a firing battery).
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Wed Dec 14, 2011 3:22 am |
|
|
|
|
Joined: Aug 08, 2010
Posts: 41
Trade Rating: 0
Location: Suffolk
|
|
Yep, sits there at 150rpm ish on the starter. Can sit there for minutes - should I wish to flatten battery. Doesn't slow down or even try to fire.
Glen.
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Wed Dec 14, 2011 3:30 am |
|
|
|
|
Joined: Aug 08, 2011
Posts: 40
Trade Rating: 0
Location: lincs
|
|
hi, as it's cranking it could be that the chip reader on steering lock cylinder isn't reading the chip
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Wed Dec 14, 2011 4:13 am |
|
|
|
|
Joined: Feb 07, 2010
Posts: 13077
Trade Rating: +65
Location: England
|
|
Immo is on the fuel pump on this old car.
Fuel relay is a big brown thing with about 15 pins.
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Wed Dec 14, 2011 4:13 am |
|
|
|
|
Joined: Aug 08, 2010
Posts: 41
Trade Rating: 0
Location: Suffolk
|
|
So the stop solenoid imobiliser system has given up? Any tips for testing this? There is fuel leaking out of the injector pipes which I thought would suggest that the stop solenoid is working. I'm probably wrong though.
Glen.
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Wed Dec 14, 2011 6:46 am |
|
|
|
|
Joined: Aug 08, 2010
Posts: 41
Trade Rating: 0
Location: Suffolk
|
|
Definetly the glow plug control/relay. I've got the engine running by putting a jump start lead across from the VBatt + to the glow plug line (after disconnecting the original feed). Starts straight away!
So, I bought a new multi function ecu relay. But where does it go? According to the haynes manual it is under the ecu. According to the haynes manual the ecu is on the right hand side of the engine bay. I can find a steel plate but it does not have an ecu that I recognise. It has a small black box. There is no multi function relay underneath it.
Glen.
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Wed Dec 14, 2011 7:28 am |
|
|
|
|
Joined: Sep 21, 2011
Posts: 317
Trade Rating: 0
Location: UK
|
|
| wurlyvalve wrote: |
Definetly the glow plug control/relay. I've got the engine running by putting a jump start lead across from the VBatt + to the glow plug line (after disconnecting the original feed). Starts straight away!
|
That's odd, a diesel should start, albeit reluctantly, after a lot of turning over if the glowplugs have gone, even in this weather:
| wurlyvalve wrote: |
Yep, sits there at 150rpm ish on the starter. Can sit there for minutes - should I wish to flatten battery. Doesn't slow down or even try to fire.
Glen. |
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Wed Dec 14, 2011 7:31 am |
|
|
|
|
Joined: Aug 08, 2010
Posts: 41
Trade Rating: 0
Location: Suffolk
|
|
It won't. I can crank for ever, then one touch of the feed to the batt and up she starts. My friends Citreon (xud9) was exactly the same (even in the summer).
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Wed Dec 14, 2011 7:35 am |
|
|
|
|
Joined: Sep 21, 2011
Posts: 317
Trade Rating: 0
Location: UK
|
|
OK no worries.
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Wed Dec 14, 2011 8:05 am |
|
|
|
|
Joined: Feb 07, 2010
Posts: 13077
Trade Rating: +65
Location: England
|
|
|
|
|
|
|
|
|
|
|
Posted: Wed Dec 14, 2011 8:27 am |
|
|
|
|
Joined: Aug 08, 2010
Posts: 41
Trade Rating: 0
Location: Suffolk
|
|
Ace, thankyou. Will check it out in a bit. A picture paints a thousand words When haynes said rhs I was looking drivers side, doh.
| | |
|
|
|
|
|
|
|
|
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17130
Online Now [102]:
Visitors: 101
Members: 0
Staff Online Now:
Page Views:
General
Forums Home
Forum FAQ
Search
