|
Author
|
Message |
|
|
 Posted: Sun Mar 25, 2012 10:44 am |
|
|
|
|
Joined: Jan 28, 2012
Posts: 88
Trade Rating: 0
Location: Derby
|
 |
Right, was a nice day today so had 5 minutes to whip ECU out and investigate the 'added wiring'. Unfortunatley I still cannot get a wire number off the red and beige wires that the added wires attach to but on opening the ECU they are soldered onto the centre plug on pins A4 and A2. Why the hell they didnt attach to the wires outside of the ecu is beyond me... Any one know what these are allocated to?
| |  |
|
|
 |
|
|
|
|
|
|
Posted: Sun Mar 25, 2012 10:58 am |
|
|
|
|
Joined: Feb 07, 2010
Posts: 2720
Trade Rating: +6
Location: UK
|
|
Lee might help you with what those pins are for, im guessing something aftermarket has been added sometime, now removed.
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Sun Mar 25, 2012 11:49 am |
|
|
|
|
Joined: Feb 08, 2010
Posts: 7045
Trade Rating: +5
Location: In the garage
|
|
Are there any wires or pins coming out of the ECU that aren't attached to anything?
| | |
|
|
|
|
 | |  |
| 2001 GTi 138, Bilstein Sprint dampers, H&R springs, 21mm Peugeot Sport torsion bars, 22mm rear ARB, Peugeot Sport Group A wishbones, 283mm discs, Goodridge stainless hoses, Maniflow 304 grade 4-2-1 2.5" manifold and system, 200 cell cat, Richard Longman head, 45mm Jenvey throttle bodies, 9.5mm TB spacers, 90mm air horns, Jenvey throttle linkage, Jenvey fuel rail, Aeromotive and Goodridge fuel fittings and braided hose, ITG sausage filter, Radtec custom radiator, Piper Ultimate Road cams, Piper vernier pulleys, Omex 600 ECU. Saxo electric PAS pump, Vibra Technics engine mounts. Samco coolant hoses, TTV steel flywheel, 4.76 final drive ratio, 307 CC 180 ratios. 2019 BMW 530i. 2017 Mercedes C300 convertible. | |
 | |  |
|
|
|
|
|
|
|
Posted: Sun Mar 25, 2012 12:19 pm |
|
|
|
|
Joined: Jan 28, 2012
Posts: 88
Trade Rating: 0
Location: Derby
|
|
no mate. its just those 2 which are non standard. They come off those pins and are drilled out the side of the ecu and then attach to a red wire and a beige wire that go with the rest of the ecu wires into the main loom
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Mon Mar 26, 2012 12:31 pm |
|
|
|
|
Joined: Feb 07, 2010
Posts: 13077
Trade Rating: +65
Location: England
|
|
Both are earth wires.
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Mon Mar 26, 2012 1:02 pm |
|
|
|
|
Joined: Jan 28, 2012
Posts: 88
Trade Rating: 0
Location: Derby
|
|
top man! I dont suppose you have a hdi wiring diagram and 3 plug ecu pin out available (everyone I found is single plug)? Id like to stip this non standard wiring out but I am still unsure what system it is tied into? Thanks so much for your help so far
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Mon Mar 26, 2012 1:04 pm |
|
|
|
|
Joined: Feb 07, 2010
Posts: 13077
Trade Rating: +65
Location: England
|
|
They'll both just go to a earthing point. It'll be to fix a a fault. If you take them off then the car might not start.
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Mon Mar 26, 2012 1:11 pm |
|
|
|
|
Joined: Jan 28, 2012
Posts: 88
Trade Rating: 0
Location: Derby
|
|
Fair enough, It just seems a really poor way of doing things! Thanks for your help and clarifying things
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Mon Mar 26, 2012 1:30 pm |
|
|
|
|
Joined: Feb 07, 2010
Posts: 13077
Trade Rating: +65
Location: England
|
|
It's better than tapping into existing wires. Direct contact with solder means a better connection.
Only downfall is that they should have wrapped some leccy tape around the wires on the exterior to keep them together and to protect them.
| | |
|
|
|
|
|
|
|
|
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17129
Online Now [146]:
Visitors: 145
Members: 0
Staff Online Now:
Page Views:
General
Forums Home
Forum FAQ
Search
