|
Author
|
Message |
|
|
 Posted: Thu Feb 28, 2013 7:21 am |
|
|
|
|
Joined: Feb 28, 2013
Posts: 16
Trade Rating: 0
|
 |
Hi
I had a smashed door and replaced it from a scrapper car, when i unplugged the door loom, i heard the other doors lock, I replaced everything, even used my original loom and now the key only locks and unlocks the new passenger door? boot and drivers door no response..
car is 55 plate 206.. any information would be appreciated, i've checked fuses, cant see any blown
| |  |
|
|
 |
|
|
|
|
|
|
Posted: Thu Feb 28, 2013 9:32 am |
|
|
|
|
Joined: Jul 22, 2012
Posts: 64
Trade Rating: 0
Location: CAERNARFON
|
|
is the interior light going on and off when the door is opened and closed
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Thu Feb 28, 2013 9:44 am |
|
|
|
|
Joined: Feb 28, 2013
Posts: 16
Trade Rating: 0
|
|
I havent checked, what would it be if it is?
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Thu Feb 28, 2013 10:14 am |
|
|
|
|
Joined: Jul 22, 2012
Posts: 64
Trade Rating: 0
Location: CAERNARFON
|
|
the interior light switch and lock motor are all one, I have simliar problem, checked light and light was not coming on when door was opened, changed combined lock/motor and all worked ok. If you do have to do it check wiring and plug type and there are a few different types out there.
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Thu Feb 28, 2013 10:44 am |
|
|
|
|
Joined: Feb 28, 2013
Posts: 16
Trade Rating: 0
|
|
Well, i changed the door and replace that used door loom with my original because all the fittings are the same
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Thu Feb 28, 2013 10:46 am |
|
|
|
|
Joined: Nov 27, 2010
Posts: 11520
Trade Rating: +10
Location: What's it to you? ? ?
|
|
Fit your original lock motor to the replacement door.
I get the feeling one of the lock motors is the wrong type for the car.
Mixing normal central locking & deadlocking motors together = odd faults with the central locking system.
| | |
|
|
|
|
 | |  |
| Toyota C-HR GR Sport 2.0 Hybrid with JBL & Alcantara packs. | |
 | |  |
|
|
|
|
|
|
|
Posted: Thu Feb 28, 2013 10:49 am |
|
|
|
|
Joined: Feb 28, 2013
Posts: 16
Trade Rating: 0
|
|
Right, i plugged my original in, didnt fit in in the door but left it dangling, problem still there
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Thu Feb 28, 2013 10:51 am |
|
|
|
|
Joined: Nov 27, 2010
Posts: 11520
Trade Rating: +10
Location: What's it to you? ? ?
|
|
| gsc1ugs wrote: |
| Right, i plugged my original in, didnt fit in in the door but left it dangling, problem still there |
Did you shut the catch part of the lock thats dangling so it thinks the door is shut before operating the central locking?
| | |
|
|
|
|
| | |
| Toyota C-HR GR Sport 2.0 Hybrid with JBL & Alcantara packs. | |
| | |
|
|
|
|
|
|
|
Posted: Thu Feb 28, 2013 11:20 am |
|
|
|
|
Joined: Feb 28, 2013
Posts: 16
Trade Rating: 0
|
|
Noni didnt, i'll try that thxs, so for now, check interior lihhts flashing and plug in orig lock and close latch, keep u posted
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Fri Mar 01, 2013 4:12 am |
|
|
|
|
Joined: Feb 28, 2013
Posts: 16
Trade Rating: 0
|
|
Ok, update
1St - the lights inside are not flashing, 2nd the original lock fitted and still other 2 doors do not respond.
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Fri Mar 01, 2013 4:15 am |
|
|
|
|
Joined: Feb 28, 2013
Posts: 16
Trade Rating: 0
|
|
Yes the interior light works has it should, light is on unlocked then when i click keyfob, locks the passenger door only and light fades off has it should, its just the drivers door and tailgate not responding since i changed the door
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Fri Mar 01, 2013 7:49 am |
|
|
|
|
Joined: Nov 27, 2010
Posts: 11520
Trade Rating: +10
Location: What's it to you? ? ?
|
|
Reboot the BSI unit, its odd this fault has only happened since you have replaced the door.
| | |
|
|
|
|
| | |
| Toyota C-HR GR Sport 2.0 Hybrid with JBL & Alcantara packs. | |
| | |
|
|
|
|
|
|
|
Posted: Fri Mar 01, 2013 8:33 am |
|
|
|
|
Joined: Feb 28, 2013
Posts: 16
Trade Rating: 0
|
|
How do i reboot the BSI?
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Fri Mar 01, 2013 12:44 pm |
|
|
|
|
Joined: Feb 28, 2013
Posts: 16
Trade Rating: 0
|
|
Is this it?
1. Start the car and then turn off the engine
2. Pop the bonnet and put the drivers window down and lock all the doors (from the outside)
3. Wait 3 minutes (the bsi needs time to shut down)
4. Take off the battery terminal and wait for 15-20 seconds, then re-attatch it.
5. Lean through the drivers window and turn on the side lights (DONT OPEN THE DOORS)
6. Put key in and turn the ignition on, but not the engine
7. Hold button on key for 10 seconds.
8. Turn ignition off and try the doors - they should now work
9. Turn the engine on and off so the bsi saves the changes
tried it, didnot work...
55 plate 206, open and shut keyfob just for clarification
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Sat Mar 02, 2013 2:50 am |
|
|
|
|
Joined: Feb 28, 2013
Posts: 16
Trade Rating: 0
|
|
Again for clarification, the key in the drivers side door, when manually locking does lock the passenger door aswell, but not the boot, i cant hear drivers door or boot lock operating
| | |
|
|
|
|
|
|
|
|
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17129
Online Now [343]:
Visitors: 342
Members: 0
Staff Online Now:
Page Views:
General
Forums Home
Forum FAQ
Search
