#16: Re: 1.1 to 1.4 ? Author: MEGA, Location: Harrow, LondonPosted: Wed Aug 11, 2010 7:44 am ----
Rob2859 wrote:
Big_Rich180 wrote:
MEGA wrote:
The 1.1 or 1.4 -> 1.6 mod requires a few more things.
Exhaust Manifold from a 1.6 as the oil filter is in a different place
Injectors
Intake manifold as it is a different bore width
Custom induction or the induction from 1.6
The clutch is different.. You could use your 1.1 clutch, it is bolt pattern compatible - but it isn't designed for the abuse. I'd recommend getting a 1.6 clutch/flywheel
1.1 -> 1.4 is pretty simple however.
Wouldnt you get all that with a donor engine and box anyway?
most scrap yards sell the block on its own without the gearbox. if you could get a decent clutch for the 1.1 i would stick with the gearbox as the gear ratios are bound to be shorter.
Yes. I've used my old 1.1 gearbox as it is perfect for a track application. Maybe not quite wide enough to get me to max out the engine on a motorway but more than sufficient for the track.
Ideally I'd have a custom gearbox with even shorter gearing but a 6th gear.. But I suppose you can't have it all. Atleast not on a shoestring budget :)
#17: Re: 1.1 to 1.4 ? Author: NorthantsBen, Location: Raunds, NorthamptonshirePosted: Wed Aug 11, 2010 1:58 pm ----
Rob2859 wrote:
NorthantsBen wrote:
I could tell quite a bit of diffrence when driving my Mates OLDER 1.1 then getting In my 1.4,
Tho my 1.4 had trouble keeping up with jarreds (pugjh) NEWER 1.1
think the older ones only have single point injection thats why. unless thats just on the saxo engines
Nar was multipoint.
#18: Re: 1.1 to 1.4 ? Author: curt, Location: darwenPosted: Thu Aug 12, 2010 6:01 am ---- I was just asking because the 1.1 I have in now is shot and I can't find out what is put(?) and I was just going to stick the 1.4 in because I can get hold of a cheap one off a friend not too bothered about speed or anything. I just want my car working again, thanks for the comments.
Please can you refrain from using text talk, thanks. Seb
#19: Re: 1.1 to 1.4 ? Author: Rob2859, Location: HalifaxPosted: Thu Aug 12, 2010 6:44 am ----
curt wrote:
i woz just askin because the 1.1 i hav in now is F****d and i cant find out what is put and i woz just goin to stick the 1.4 in because i can i hold of a cheap off a friend not to assed about seed or ano thing like lol just want my car workin agen haha thanks for all the coments
thanks curt
in that case put a 1.4 in it. will cost no more as it is a straight swap pretty much.
#20: Re: 1.1 to 1.4 ? Author: MEGA, Location: Harrow, LondonPosted: Thu Aug 12, 2010 7:17 am ----
curt wrote:
I was just asking because the 1.1 I have in now is shot and I can't find out what is put(?) and I was just going to stick the 1.4 in because I can get hold of a cheap one off a friend not too bothered about speed or anything. I just want my car working again, thanks for the comments.
Please can you refrain from using text talk, thanks. Seb
I is jus finkin dat u should do dat den bro get a 1.4 and drop it in isn't it.
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17129
Online Now [149]:
Visitors: 148
Members: 0
Staff Online Now:
Page Views:
General
:)
