#31: Re: Macs rally 206 project Author: Marky234, Location: ShrewsburyPosted: Mon Sep 13, 2010 12:12 pm ---- polycarb is what i meant its just easier to say perspex lol
#32: Re: Macs rally 206 project Author: macj, Location: EssexPosted: Mon Sep 13, 2010 12:57 pm ---- Todays update.... fitted the fuel sampling valve today.... still waiting for the tank guard to arrive and then thats it ready for logbooking
#33: Re: Macs rally 206 project Author: spud_owen, Location: ashby de la zouchPosted: Tue Sep 14, 2010 5:31 am ---- did the structiner pic up on any other bits with your car? i dont really understand the fuel sampling value, will i need one on mine you reckon, mines competely standard, standard tank, engine etc!
#35: Re: Macs rally 206 project Author: macj, Location: EssexPosted: Tue Sep 14, 2010 6:15 am ---- Nice one mate
#36: Re: Macs rally 206 project Author: Danw_VVT, Location: Herts/LondonPosted: Tue Sep 14, 2010 6:17 am ---- no probs wanted to see it on track to put all the talk on here into action
did the structiner pic up on any other bits with your car? i dont really understand the fuel sampling value, will i need one on mine you reckon, mines competely standard, standard tank, engine etc!
If you go down the fuel injection route you need to provide a fuel sample point. It consists of a dry-break coupling and a 300mm hose to take a sample. You will need a tank guard, mudflaps, fire extinguisher system, roll cage, safety cutout.... the list is extensive but I can list it all on here if you want or you can read the blue book and I will answer any questions it may highlight.
I have a few issues left now to complete before I can get the scrut back to log book... Tank guard (not arrived yet) and picture for logbook...easy
no probs wanted to see it on track to put all the talk on here into action
Hope to have a load to post up next week after Castle Coombe rally stages this weekend
#39: Re: Macs rally 206 project Author: spud_owen, Location: ashby de la zouchPosted: Wed Sep 15, 2010 3:34 am ----
macj wrote:
spud_owen wrote:
did the structiner pic up on any other bits with your car? i dont really understand the fuel sampling value, will i need one on mine you reckon, mines competely standard, standard tank, engine etc!
If you go down the fuel injection route you need to provide a fuel sample point. It consists of a dry-break coupling and a 300mm hose to take a sample. You will need a tank guard, mudflaps, fire extinguisher system, roll cage, safety cutout.... the list is extensive but I can list it all on here if you want or you can read the blue book and I will answer any questions it may highlight.
I have a few issues left now to complete before I can get the scrut back to log book... Tank guard (not arrived yet) and picture for logbook...easy
Yes mate i know all that! was just wondering about the fuel break, I was refering to your post in the british rally forum, and all the un certainty about the rear spoiler, how did you get on seeing as its not a genuine pug part?
#40: Re: Macs rally 206 project Author: macj, Location: EssexPosted: Wed Sep 15, 2010 1:20 pm ---- Todays update. Fitted heat shield and rose jointed drop links on the front ARB.... then promptly broke one on the test drive home from the workshop..... back to the drawing board.....
#41: Re: Macs rally 206 project Author: macj, Location: EssexPosted: Sat Sep 18, 2010 3:45 pm ---- Had a great day at Castle Combe today... the pug was on song and again beat some serious cars... subaru who??? Spent most of the day on the tarmac with good results and then took to the rougher stuff and blew the 1st to second gear syncro on the first run thru the special stage.... not to bad to stop the runs though. Thanks to Ape for coming but I am sorry I didnt have time for a proper natter
went out on the tarmac later for two more runs using just 3rd, 4th and 5th, Still ate the subaru.... Last run of the day saw a brief tussle with a Civic typeR which sadly ended in him trying too hard to catch me and him rolling.... Hope the crew are ok
Final thought... very pleased with the little car and bring on the proper stuff
#42: Re: Macs rally 206 project Author: Ape, Location: Clipping the Apex!Posted: Sat Sep 18, 2010 4:41 pm ---- It was a great day, loads to see and watch, took around 700 photo's in the end! It was a busy day for both of us matey so no worries about being stretched for time. I've got a few pics of you on the main circuit which I'll post up soon, couldn't get any of you on the stage as they'd blocked off public access
#43: Re: Macs rally 206 project Author: macj, Location: EssexPosted: Sun Sep 19, 2010 2:17 am ---- It wasnt the easiest photo opportunity I have seen on stages... but hey it was fun. Looks like you will be editing all weekend now
click on the image... takes a minute for the slideshow to load properly Last edited by macj on Sun Nov 28, 2010 4:27 am; edited 2 times in total
#44: Re: Macs rally 206 project Author: imjeeves, Location: Glasgow / WellingPosted: Sun Sep 19, 2010 5:04 am ---- Where abouts did you get your tank guards from mate?? Car is coming along nicely i see!!!
#45: Re: Macs rally 206 project Author: macj, Location: EssexPosted: Sun Sep 19, 2010 5:20 am ----
imjeeves wrote:
Where abouts did you get your tank guards from mate?? Car is coming along nicely i see!!!
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17130
Online Now [408]:
Visitors: 407
Members: 0
Staff Online Now:
Page Views:
General
