#16: Re: Pug 306 XSi-6 Author: blade, Location: ManchesterPosted: Wed Dec 15, 2010 3:47 pm ---- well here are a few more of the pics what i got tonight
clean face of inlet (took me ages)
gasket in place
all pretty much back together
well, so far i have sorted the idling problem at long last soo happy about that, and with the removal of resonator i have noticed a slight increase in the induction noise and seems to pull abit better aswell, not sure if it has done anything with the bhp or not im not too sure on but will find out next time its on the rollers
#17: Re: Pug 306 XSi-6 Author: blade, Location: ManchesterPosted: Tue Jan 11, 2011 12:23 pm ---- thought i would get some pics up of how it looks atm, bit of a mess, needs a good clean, had a good opportunity to take some pics while at work today when a nice car parked behind, **pics taken with s***ty Iphone 4 cam**
and thought i would try HDR off the cam for the last pic
next load of pics will be of it clean
#18: Re: Pug 306 XSi-6 Author: Harry, Location: StaffordPosted: Tue Jan 11, 2011 12:34 pm ---- Like a lot, love 306s as well good job on what you've done keep it up
#19: Re: Pug 306 XSi-6 Author: kieron, Location: in the housePosted: Tue Jan 11, 2011 1:38 pm ---- looks good, i remember reading this project on pug306.net i was hooked did it hit 167bhp if i remember right?
#20: Re: Pug 306 XSi-6 Author: blade, Location: ManchesterPosted: Tue Jan 11, 2011 1:40 pm ---- erm, last rolling road it went on got 161.8bhp with 146lbft, and it was running too lean, but all that is sorted now, so should be around the 167bhp mark now hopefully, going to a rr meet next month
#21: Re: Pug 306 XSi-6 Author: kieron, Location: in the housePosted: Tue Jan 11, 2011 1:42 pm ---- the one with PSOOC or have pug306.net got one coming up?
#22: Re: Pug 306 XSi-6 Author: blade, Location: ManchesterPosted: Tue Jan 11, 2011 1:44 pm ---- nope will hopefully be with gti&rallye owners if not pug306.net are having one next month i think in the midlands
#23: Re: Pug 306 XSi-6 Author: kieron, Location: in the housePosted: Tue Jan 11, 2011 1:53 pm ---- that ok then if i still got mine ill pop along
it the basher guy still on there?
he was a right tool
#24: Re: Pug 306 XSi-6 Author: blade, Location: ManchesterPosted: Tue Jan 11, 2011 1:58 pm ---- yea hes still on there, and still very much a tool, i don go on there much now tho tbh, turned abit s**te,
#25: Re: Pug 306 XSi-6 Author: kieron, Location: in the housePosted: Tue Jan 11, 2011 2:02 pm ---- i still have a look now and then but have not posted for a while, this last time i went on was when the forum layout changed
#26: Re: Pug 306 XSi-6 Author: blade, Location: ManchesterPosted: Mon Jan 17, 2011 3:19 pm ---- well i was bored with the plane looking engine bay so thought i would freshen it up abit by spraying a few bits got these to start with but will be doing the cam covers then giving it a real good clean, heres from start to finish
all clean
sanded
primered and sanded
colour coat
ECU cover with final coat of colour
battery cover with 1st coat of lacquer
all done with rattle cans in the garden in the cold with halfords own sprays
will update it again once there fully dry and ive wet sanded and polished and there back in the engine bay
#27: Re: Pug 306 XSi-6 Author: blade, Location: ManchesterPosted: Tue Jan 18, 2011 2:10 pm ---- put back in the engine bay now, only probably is that the engine is minging, and they look silly being the only spotless things in there but here are the pics
once fully dried i will be taking off again and wetsanding so they are silky smooth and polish up so there shiney clean again
#28: Re: Pug 306 XSi-6 Author: blade, Location: ManchesterPosted: Wed Jan 19, 2011 5:56 pm ---- well, its been for a wash and wax and been to get some pics, its in desperate need of a good detail, but that can wait for another time
#29: Re: Pug 306 XSi-6 Author: blade, Location: ManchesterPosted: Thu Feb 03, 2011 12:17 pm ---- WetSand Time
Following on from spraying and letting the lacquer harden, i thought it was time to wetsand and polish these bits not finishd them yet, but did a quick tester last night, was wetsanded with 1200grit as i didnt have any finer, so here are the pics,
Half sanded half polished
heres some with a torch to show minor swirls (which will be gone)
was polished with my machine polisher, wasnt done properly was only testing as only passed once for about 1-2mins, but will get done propper once i get time
#30: Re: Pug 306 XSi-6 Author: Edward, Location: In the garagePosted: Thu Feb 03, 2011 2:17 pm ---- Why are you spending time painting plastic bits and making them pretty but not cleaning all the other engine bay parts?
It's like a woman rolling around in a muddy field and without having a wash she puts all her makeup on. A clean engine bay is much nicer than a grubby bay with some tarted up plastic parts.
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17129
Online Now [59]:
Visitors: 58
Members: 0
Staff Online Now:
Page Views:
General
soo happy about that, and with the removal of resonator i have noticed a slight increase in the induction noise and seems to pull abit better aswell, not sure if it has done anything with the bhp or not im not too sure on but will find out next time its on the rollers 
