#16: Re: 406 brembos and fiat coupe brembos, are they the same?? Author: Ruffy_206, Location: BristolPosted: Tue Oct 12, 2010 9:59 am ---- im guessing but think its around 110.
#17: Re: 406 brembos and fiat coupe brembos, are they the same?? Author: Golfguy206, Location: PeterboroughPosted: Tue Oct 12, 2010 10:11 am ---- So, if i want to upgrade the brakes on my 2002 XSi (1.6 16v) I can swap them for the 406 V6 ones and they go straigh on?
What brake pads do I fit? (without sounding really stoopid im gunna guess the 406 V6 pads.)
#18: Re: 406 brembos and fiat coupe brembos, are they the same?? Author: st3v3n, Location: Liverpool Drives: 206 GTiPosted: Tue Oct 12, 2010 10:15 am ---- Guessing doesn't help anybody
#19: Re: 406 brembos and fiat coupe brembos, are they the same?? Author: Ruffy_206, Location: BristolPosted: Tue Oct 12, 2010 10:22 am ----
st3v3n wrote:
Guessing doesn't help anybody
ooo ok then MR no it all. chill out as i said its a guess i no it isnt close to the fiat ones. which by the sounds of it is the ones he is trying to fit.
#20: Re: 406 brembos and fiat coupe brembos, are they the same?? Author: Ruffy_206, Location: BristolPosted: Tue Oct 12, 2010 10:23 am ---- so what is the 85 or 86 or 87 or ??????????????????
#21: Re: 406 brembos and fiat coupe brembos, are they the same?? Author: meady, Location: basingstokePosted: Tue Oct 12, 2010 2:12 pm ---- what would you need then to get the fiat ones to fit as i wouldnt have a cluew what to look for ???
#22: Re: 406 brembos and fiat coupe brembos, are they the same?? Author: Ruffy_206, Location: BristolPosted: Tue Oct 12, 2010 2:18 pm ---- a bracket made up that will bolt onto the fiat ones and then onto the mounting points.
look on the white noise project thread the racer one he has got a bracket for his but think his are different brembos again but same princable
#23: Re: 406 brembos and fiat coupe brembos, are they the same?? Author: T_bandery, Location: East londonPosted: Tue Oct 12, 2010 2:21 pm ---- I wouldn't want to trust some company to make them for me, what if the bracket snaps when braking hard, is there any ready made available that have been tested?
#24: Re: 406 brembos and fiat coupe brembos, are they the same?? Author: Ruffy_206, Location: BristolPosted: Tue Oct 12, 2010 2:23 pm ---- nope its not something people make as far as im aware. if you want off the shelf jobs look at hi spec or simlar.
#25: Re: 406 brembos and fiat coupe brembos, are they the same?? Author: T_bandery, Location: East londonPosted: Tue Oct 12, 2010 2:32 pm ----
Ruffy_206 wrote:
nope its not something people make as far as im aware. if you want off the shelf jobs look at hi spec or simlar.
okay cool, thanks for the info
#26: Re: 406 brembos and fiat coupe brembos, are they the same?? Author: Seabook, Posted: Tue Oct 12, 2010 2:45 pm ---- or just get the 406 brembo lol
#27: Re: 406 brembos and fiat coupe brembos, are they the same?? Author: st3v3n, Location: Liverpool Drives: 206 GTiPosted: Tue Oct 12, 2010 3:10 pm ---- They are at 82mm centres. I was only saying that what's the point in guessing and being wrong? It doesn't help.
#28: Re: 406 brembos and fiat coupe brembos, are they the same?? Author: Uz, Location: No Man's LandPosted: Tue Oct 12, 2010 3:13 pm ----
Golfguy206 wrote:
So, if i want to upgrade the brakes on my 2002 XSi (1.6 16v) I can swap them for the 406 V6 ones and they go straigh on?
What brake pads do I fit? (without sounding really stoopid im gunna guess the 406 V6 pads.)
I'm fitting v6 brembos on my XSi with the 406 master cylinder (purely because I have a full v6 I can take appart and use whatever I need). I'd advise to use the bigger master cylinder as it'll help improve the feel of the brake and travel as well.
The pads you use are the same on all the brembo 4pots from different cars but the oem ones will be all the same, just depends if you want to use something better like tarox, red stuff etc.
I'm going to be running brembo max pads and c4 vts brembo max vented discs with mine.
#29: Re: 406 brembos and fiat coupe brembos, are they the same?? Author: Ruffy_206, Location: BristolPosted: Tue Oct 12, 2010 3:20 pm ----
st3v3n wrote:
They are at 82mm centres. I was only saying that what's the point in guessing and being wrong? It doesn't help.
becuase i was under the impression he had fiat ones which i no dont fit so just guessed the pug one i new it was smaller tho.
in my eyes ive helped the op more than you have. and arnt you ment to be a brembo specailist..............
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17132
Online Now [183]:
Visitors: 182
Members: 0
Staff Online Now:
Page Views:
General
