#16: Re: Project Semi-Smooth Author: Antix, Location: WorcesterPosted: Fri Oct 29, 2010 10:31 am ----
Dabamash wrote:
I own a 206 3.2Tdi GTi 6 Sport Zest.
Sport?
#17: Re: Project Semi-Smooth Author: Dabamash, Location: The car in frontPosted: Fri Oct 29, 2010 10:33 am ----
Antix wrote:
Dabamash wrote:
I own a 206 3.2Tdi GTi 6 Sport Zest.
Sport?
I like how that's the only thing you pull me up on rofl
#18: Re: Project Semi-Smooth Author: Dabamash, Location: The car in frontPosted: Fri Oct 29, 2010 10:34 am ----
Teebag wrote:
Dabamash wrote:
I own a 206 3.2Tdi GTi 6 Sport Zest.
doubt it daba.... you can probably type quicker than your car goes lol.
No, but I can walk quicker
#19: Re: Project Semi-Smooth Author: Teebag, Location: exhall, bedworth, coventryPosted: Fri Oct 29, 2010 10:38 am ----
Dabamash wrote:
Teebag wrote:
Dabamash wrote:
I own a 206 3.2Tdi GTi 6 Sport Zest.
doubt it daba.... you can probably type quicker than your car goes lol.
No, but I can walk quicker
ahhhh my mistake
#20: Re: Project Semi-Smooth Author: Ryan..., Location: ChesterfieldPosted: Sun Oct 31, 2010 4:30 pm ---- Updates:
Day 2
#21: Re: Project Semi-Smooth Author: glenpring, Location: KENTPosted: Tue Nov 02, 2010 3:32 am ---- whats that black sturff you filling the gap with???
#22: Re: Project Semi-Smooth Author: Teebag, Location: exhall, bedworth, coventryPosted: Tue Nov 02, 2010 3:46 am ---- why are you using tigerseal to fill the gap like that?
#23: Re: Project Semi-Smooth Author: JG220, Location: At my deskPosted: Tue Nov 02, 2010 5:04 am ---- Poor thing
#24: Re: Project Semi-Smooth Author: Ryan..., Location: ChesterfieldPosted: Tue Nov 02, 2010 5:40 am ---- Due to broken clips and to guarantee it will not move the underside and edges have been tigersealed. the excess will be sanded down then smoothing starts. on the rear bumper if we don't fill it out abit then then the filler will most certainly crack, plastic welding could deformed it and tigerseal is just as good as fiberglass for things like that.
#25: Re: Project Semi-Smooth Author: Teebag, Location: exhall, bedworth, coventryPosted: Tue Nov 02, 2010 6:00 am ----
Ryan... wrote:
Due to broken clips and to guarantee it will not move the underside and edges have been tigersealed. the excess will be sanded down then smoothing starts. on the rear bumper if we don't fill it out abit then then the filler will most certainly crack, plastic welding could deformed it and tigerseal is just as good as fiberglass for things like that.
i disagree that tigerseal is just as good as fibreglass for that.... tigerseal's primary job is as an adhesive not as a building compound, unlike fibreglass where its primary job is as a building compound....
if it was me doing the job i would have tigersealed the strips on the car and bumper and then fibreglassed the edges to get a smooth finish not try and get the tigerseal to do a job its not properly designed to do.... i know tigerseal can be sanded and can fill out a bit but it's not the way i'd recommend at all...
#26: Re: Project Semi-Smooth Author: Ryan..., Location: ChesterfieldPosted: Tue Nov 02, 2010 10:05 am ---- It seems to work brilliantly and filler 'sticks' to it better. One of them things that's not meant to do it but does
It's also even as it was applied with a finger.
#27: Re: Project Semi-Smooth Author: Teebag, Location: exhall, bedworth, coventryPosted: Tue Nov 02, 2010 10:14 am ----
Ryan... wrote:
It seems to work brilliantly and filler 'sticks' to it better. One of them things that's not meant to do it but does
It's also even as it was applied with a finger.
wont last tho mate. fibreglass would be even if applied properly aswell. the filler wont fully adhere as tigerseal contains slight amounts of silicone, this prevents all the moisture in the filler from escaping so cannot fully dry.
#28: Re: Project Semi-Smooth Author: ExoVyper, Location: Waiting for the tugboats to push me into port (Whitehaven)Posted: Tue Nov 02, 2010 10:17 am ---- crikey... thats all i can say :/
#29: Re: Project Semi-Smooth Author: Ali_H, Location: Chichester, SussexPosted: Tue Nov 02, 2010 11:16 am ----
Antix wrote:
Ryan... wrote:
its the 1.9td, car had the badges on when it was bought lol
1.9td?
Maybe it was on a badge on the back
#30: Re: Project Semi-Smooth Author: NorthantsBen, Location: Raunds, NorthamptonshirePosted: Tue Nov 02, 2010 11:21 am ----
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17130
Online Now [281]:
Visitors: 280
Members: 0
Staff Online Now:
Page Views:
General
lol.
