#1: Smoked/Black Side Repeaters/Indictors Author: A18NHH, Location: MiddlesbroughPosted: Wed Nov 03, 2010 4:05 pm ---- Hi,
i'm looking to change my white/clear indicators on my Moonstone GTi to black ones.
How do the indicators stay on the car? are they stuck? clipped?
Can anyone reccomend my any blck indicators - is it worth paying for the ecosse ones or are eBay ones just as good? Will they stay on the car equally as well and not fall off
Thanks in advance guys
#2: Re: Smoked/Black Side Repeaters/Indictors Author: 2Oh!6, Location: GloucesterPosted: Wed Nov 03, 2010 4:07 pm ---- It's just like a clip attatched to the indicator, have to push it in and the indicator pops out. To get mine I just got a knife and slid it behind and it popped out, you could scratch some paint off this way though probably a better way to do it.
#3: Re: Smoked/Black Side Repeaters/Indictors Author: A18NHH, Location: MiddlesbroughPosted: Wed Nov 03, 2010 4:09 pm ---- thanks for that - least i know now - i'll just have to be very careful then
#4: Re: Smoked/Black Side Repeaters/Indictors Author: 2Oh!6, Location: GloucesterPosted: Wed Nov 03, 2010 4:11 pm ---- www.google.co.uk/imgre...99&bih=775
Then you just gotta push in the little part on the left so it unclips from the wing.
#5: Re: Smoked/Black Side Repeaters/Indictors Author: A18NHH, Location: MiddlesbroughPosted: Wed Nov 03, 2010 4:14 pm ---- so which ones did you buy?
#6: Re: Smoked/Black Side Repeaters/Indictors Author: 2Oh!6, Location: GloucesterPosted: Wed Nov 03, 2010 4:15 pm ---- Mine were just cheap ones, 9/10 the ones on ebay are just standard pug ones anyway just someone has put tint film over them.
#7: Re: Smoked/Black Side Repeaters/Indictors Author: Mikey2uk, Location: StevenagePosted: Wed Nov 03, 2010 4:18 pm ---- Dont buy just get some tint spray I did mine and they look good
#8: Re: Smoked/Black Side Repeaters/Indictors Author: A18NHH, Location: MiddlesbroughPosted: Wed Nov 03, 2010 4:21 pm ---- any photo's?
#9: Re: Smoked/Black Side Repeaters/Indictors Author: rttam, Location: devonPosted: Wed Nov 03, 2010 4:25 pm ---- mine cost about £15 from "blacks of stitchell" (they have an ebay shop)
just pop straight in need to swap the bulb holders from the original pug ones though good quality too
#10: Re: Smoked/Black Side Repeaters/Indictors Author: Mikey2uk, Location: StevenagePosted: Wed Nov 03, 2010 4:25 pm ----
A18NHH wrote:
any photo's?
There should be some in my Attacked by a Dodo thread mate
#11: Re: Smoked/Black Side Repeaters/Indictors Author: Harry, Location: StaffordPosted: Wed Nov 03, 2010 5:08 pm ---- Tint spray is definately the way to go with side repeaters
#12: Re: Smoked/Black Side Repeaters/Indictors Author: glenpring, Location: KENTPosted: Thu Nov 04, 2010 3:02 am ---- i put some flyeyes on mine
#13: Re: Smoked/Black Side Repeaters/Indictors Author: Danny., Location: PeterboroughPosted: Thu Nov 04, 2010 3:27 am ---- If you use a knife or screw driver.
Get a bit of clothe to protect paint where the screwdriver or knife will hit the car.
#14: Re: Smoked/Black Side Repeaters/Indictors Author: NorthantsBen, Location: Raunds, NorthamptonshirePosted: Thu Nov 04, 2010 3:34 am ---- I used to get a long screw driver to push the clip in from the back off the wing, going in from the gap in the wing when the door is open.
#15: Re: Smoked/Black Side Repeaters/Indictors Author: Jordan_xsi, Location: IpswichPosted: Thu Nov 04, 2010 4:06 am ---- i just pusgd mine in and wiggled it abit and out they popped. i got mine from ebay for like £12, quality is pretty good tbh never had any problems with them!
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17134
Online Now [597]:
Visitors: 596
Members: 0
Staff Online Now:
Page Views:
General
