#1: BSI Reset & Battery Clip Issue Author: 206driver, Location: CoventryPosted: Fri Dec 10, 2010 1:03 pm ---- Can someone please explain how to do a bsi reset? The search function on this site is tricky - I can never find what im looking for!
I have a 206 X reg (2000)
Over the past few months the + connecter of my battery just comes off and the car doesn't show any signs of life... obviously. I just put it straight back on, dont reset anything and drive off.. but was told i should do this bsi reset!
#2: Re: BSI Reset & Battery Clip Issue Author: Lee, Location: EnglandPosted: Fri Dec 10, 2010 1:05 pm ---- Disconnect the negative on the battery, then the positive.
Leave for a few minutes
Reconnect the positive, then the negative
#3: Re: BSI Reset & Battery Clip Issue Author: panason1c, Location: SomersetPosted: Fri Dec 10, 2010 2:10 pm ---- Here is the FULL procedure.......
Put the driver's window down, lift the bonnet and ensure all equipment is switched off.
Ensure all doors are closed and remove key from the ignition.
Wait for 3 minutes, disconnect the vehicle battery and wait 15 seconds.
Reconnect the vehicle battery, wait a further 10 seconds (do not open doors.).
Switch on the side lights through the driver's window.
Switch on the ignition and check system's functionality.
Hold lock button on key down for 10 seconds.
Remove key open & close door test central locking system.
Put the driver's window down, lift the bonnet and ensure all equipment is switched off.
Ensure all doors are closed and remove key from the ignition.
Wait for 3 minutes, disconnect the vehicle battery and wait 15 seconds.
Reconnect the vehicle battery, wait a further 10 seconds (do not open doors.).
Switch on the side lights through the driver's window.
Switch on the ignition and check system's functionality.
Hold lock button on key down for 10 seconds.
Remove key open & close door test central locking system.
Start the engine and complete the system's check.
It's not mux
#5: Re: BSI Reset & Battery Clip Issue Author: panason1c, Location: SomersetPosted: Fri Dec 10, 2010 2:31 pm ---- Ah, sorry, my mistake!, i thought the full reset applied to all bsi equipped vehicles.
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17131
Online Now [152]:
Visitors: 152
Members: 0
Staff Online Now:
Page Views:
General
