#16: Re: Alarm Prob - help needed Author: cookiemonster, Location: In front of youPosted: Sun Dec 12, 2010 11:45 am ----
MrBSI wrote:
You tried spraying the bonnet sensor with some WD40?
Its the small black switch attached to the catch.
Check it also hasnt fallen off
just got home its dark now will take a look tomorrow - cheers
#17: Re: Alarm Prob - help needed Author: cookiemonster, Location: In front of youPosted: Tue Dec 14, 2010 4:56 pm ----
MrBSI wrote:
You tried spraying the bonnet sensor with some WD40?
Its the small black switch attached to the catch.
Check it also hasnt fallen off
i cant see a small black switch on catch to be honest
#18: Re: Alarm Prob - help needed Author: skard, Location: UK - NorthPosted: Tue Dec 14, 2010 5:18 pm ----
cookiemonster wrote:
i cant see a small black switch on catch to be honest
best pic i found in a quick search...
the top part is the plunger switched previously referred to.
when the bonnet latches shut it should push down on this.
thus, if it has fallen off or doesn't fully engage it won't activate the alarm.
#19: Re: Alarm Prob - help needed Author: wpday07, Location: WiltshirePosted: Tue Jun 21, 2011 3:18 pm ---- Hi, Did you fix the problem? I also have an alarm that wont function,
the Boot/Bonnet sensors are situated in the correct place
the wiring seems to be ok to the Textron control box (Pillars are connected)
Ive tried arming it with the windows down and running my hand across the sensors, nothing happens, not even the lights flash..
the only weird thing is when i lock and unlock the car i get a strange noise as if someone *excuse this* farted.
How can i get the blinkin thing to work...
anyones help much appreciated.
#20: Re: Alarm Prob - help needed Author: Lee, Location: EnglandPosted: Tue Jun 21, 2011 3:26 pm ---- Lock the car with the fob, then manually unlock it with the key
#21: Re: Alarm Prob - help needed Author: wpday07, Location: WiltshirePosted: Tue Jun 21, 2011 3:57 pm ---- hi, cheers for the quick reply, tried that, no luck :/ it just unlocks normally
#22: Re: Alarm Prob - help needed Author: Lee, Location: EnglandPosted: Tue Jun 21, 2011 3:59 pm ---- Your alarm isn't even activating then. Possibly a problem with the control unit
#23: Re: Alarm Prob - help needed Author: wpday07, Location: WiltshirePosted: Tue Jun 21, 2011 4:04 pm ---- ive taken the thing out, disconnected it, reconnected it, still nothing, the fuse is ok also, yeah you could be right, thank you.
now where to buy one.. haha
#24: Re: Alarm Prob - help needed Author: MrBSI, Location: What's it to you? ? ?Posted: Wed Jun 22, 2011 3:51 am ----
wpday07 wrote:
the only weird thing is when i lock and unlock the car i get a strange noise as if someone *excuse this* farted.
Your alarm is trying to tell you one of the doors / boot / bonnet isnt shut correctly & that means the system wont arm.
#25: Re: Alarm Prob - help needed Author: wpday07, Location: WiltshirePosted: Wed Jun 22, 2011 4:10 am ---- so the sensors are broken?
#26: Re: Alarm Prob - help needed Author: MrBSI, Location: What's it to you? ? ?Posted: Wed Jun 22, 2011 4:12 am ---- Your alarm is trying to tell you one of the doors / boot / bonnet isnt shut correctly.
You need to check which sensor is stopping the alarm system arming.
#27: Re: Alarm Prob - help needed Author: wpday07, Location: WiltshirePosted: Thu Jun 23, 2011 7:21 am ---- thank you
#28: Re: Alarm Prob - help needed Author: Ash, Location: Running from Ant and Lee and Adam...........Posted: Thu Jun 23, 2011 9:00 am ----
Lee wrote:
Are all the doors actually locking when you lock the car?
I've got a dicky drivers lock which doesn't always lock and that causes my alarm to not activate.
Now I know which door to try. Thanks Lee
#29: Re: Alarm Prob - help needed Author: wpday07, Location: WiltshirePosted: Fri Jun 24, 2011 6:25 am ---- it seems that all of the sensors are ok, its a 2003 model so it shows up if the door is open etc. It must be the control box.. :/
#30: Re: Alarm Prob - help needed Author: MrBSI, Location: What's it to you? ? ?Posted: Fri Jun 24, 2011 7:59 am ----
wpday07 wrote:
it seems that all of the sensors are ok, its a 2003 model so it shows up if the door is open etc. It must be the control box.. :/
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17130
Online Now [42]:
Visitors: 41
Members: 0
Staff Online Now:
Page Views:
General
