#1: How to respray all the facias :) Author: force666, Location: BrightonPosted: Mon Dec 20, 2010 12:18 pm ---- After hours of searching through this site i thought it was about time i make my own topic as me and quite a few other people i know want to cut out all the waffle and just help eachother style our purs. So far my problem is i want to know how to remove most of the inside fascias and air vents in my 206 so i can respray them. Any pictures would really help!
#2: Re: How to respray all the facias :) Author: Antknee, Location: ManchesterPosted: Mon Dec 20, 2010 12:29 pm ---- Dead easy,
1st the MFD surround just pulls up and off, unclip the hazard button connector and put to one side
2nd unsrew the 2 screws which will now be revealed (use torx key), pull off the trim, gently so you dont break it, pull it towards you working from top to bottom
side vents just pull off if you lever them out with a flat screwdriver/butter knife or something
paint away!
#3: Re: How to respray all the facias :) Author: Mrs_Howey, Location: WorthingPosted: Mon Dec 20, 2010 12:32 pm ---- It's a T25 torx if i remember correctly,
#4: Re: How to respray all the facias :) Author: force666, Location: BrightonPosted: Tue Dec 21, 2010 2:59 am ---- Sweet! I was beginning to get muddled with how to take the centre panel off. How do you take the dashboard air vents off near the doors?
#5: Re: How to respray all the facias :) Author: force666, Location: BrightonPosted: Tue Dec 21, 2010 3:11 am ---- I will sort some pictures of how to Last edited by force666 on Tue Dec 21, 2010 3:25 am; edited 1 time in total
#6: Re: How to respray all the facias :) Author: Jordan_xsi, Location: IpswichPosted: Tue Dec 21, 2010 3:14 am ----
force666 wrote:
Sweet! I was beginning to get muddled with how to take the centre panel off. How do you take the dashboard air vents off near the doors?
Prise them out with a flat blade, dead easy!
#7: Re: How to respray all the facias :) Author: force666, Location: BrightonPosted: Tue Dec 21, 2010 3:23 am ---- Here is a few Progress pictures, to show how to do it step by step
#8: Re: How to respray all the facias :) Author: curly, Location: brightonPosted: Tue Dec 21, 2010 5:57 am ---- good to see the force finaly on here now,,
you tell me what guides u want doing, ill do them
#9: Re: How to respray all the facias :) Author: force666, Location: BrightonPosted: Tue Dec 21, 2010 8:17 am ---- No doubt bro, the force is strong, but down some on the XS. Thinking use this to hook up the internal Black to White?
#10: Re: How to respray all the facias :) Author: curly, Location: brightonPosted: Tue Dec 21, 2010 11:15 am ---- u get the paint, sandpaper and primer, n il give u a hand
#11: Re: How to respray all the facias :) Author: force666, Location: BrightonPosted: Wed Dec 22, 2010 3:27 am ---- Is that what i need? Damn.... Lucky ive got bare tons of all three
#12: Re: How to respray all the facias :) Author: Icetto, Location: Cape TownPosted: Wed Dec 22, 2010 3:52 am ---- Wrap them in carbon perhaps unless you have other plan already.
Anybody have a guide to changing the orange lights in the display console?
#13: Re: How to respray all the facias :) Author: Jordan_xsi, Location: IpswichPosted: Wed Dec 22, 2010 3:57 am ----
Icetto wrote:
Wrap them in carbon perhaps unless you have other plan already.
Anybody have a guide to changing the orange lights in the display console?
As for carbon wrapping your better off just buying it from a 180 as thats carbon anyway.
And yeh there is a guide for that in the how to section
#14: Re: How to respray all the facias :) Author: Icetto, Location: Cape TownPosted: Wed Dec 22, 2010 4:16 am ---- Cool. I'll have a look there. Eager to change my ugly orange lights
I forgot you UK guys so lucky. Can just take a 180 section. Here in SA 180s are so scarce
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy