#1: A bit of help Author: Mikey2uk, Location: StevenagePosted: Tue Jan 11, 2011 6:28 am ---- Hi
Can someone tell me the difference betweent these to part numbers
6429S1
6429P0
They are for the drivers wiper arm which I need to replace.
Thanks
#2: Re: A bit of help Author: T_bandery, Location: East londonPosted: Tue Jan 11, 2011 6:34 am ---- One says S1 at the end and the other says P0... i think
#3: Re: A bit of help Author: Lee, Location: EnglandPosted: Tue Jan 11, 2011 6:34 am ---- Without checking, if they are both listed on the same thing eg drivers right arm.
Then one is for a 22" blade and the other is a 26" blade.
You want the latest/biggest RPO/DAM number as that will be 22"
#4: Re: A bit of help Author: Mikey2uk, Location: StevenagePosted: Tue Jan 11, 2011 6:37 am ---- So Iv got to go for 6429S1 then?
#5: Re: A bit of help Author: Lee, Location: EnglandPosted: Tue Jan 11, 2011 6:38 am ---- Yeah.
Just checked and thats the part number you want [SINCE RPO No. 08470]
#6: Re: A bit of help Author: Mikey2uk, Location: StevenagePosted: Tue Jan 11, 2011 6:39 am ---- You got a price Lee?
#7: Re: A bit of help Author: Lee, Location: EnglandPosted: Tue Jan 11, 2011 6:41 am ---- Comes up at £62.02 including VAT
#8: Re: A bit of help Author: Mikey2uk, Location: StevenagePosted: Tue Jan 11, 2011 6:43 am ---- Thanks Lee. fingers crossed that solves the problem
#9: Re: A bit of help Author: Lee, Location: EnglandPosted: Tue Jan 11, 2011 6:44 am ---- What's the problem?
#10: Re: A bit of help Author: Mikey2uk, Location: StevenagePosted: Tue Jan 11, 2011 6:48 am ---- I had it last year and it has come back.
Right in my eye line where the hook is on the blade, about 2 inchs up from the base of the screen in a curve it misses the screen. I have tried the trick of putting a cable tie on the spring to pull it tighter, worked for a bit but not now. It has become dangerous to drive in the rain as the screen is not clearing right where that is.
Been told the arm has gone.
#11: Re: A bit of help Author: Lee, Location: EnglandPosted: Tue Jan 11, 2011 6:54 am ---- Yeah it probably is the arm thats gone then. Unless the wiper blades you are running are too big so they aren't going flush to the screen.
#12: Re: A bit of help Author: Mikey2uk, Location: StevenagePosted: Tue Jan 11, 2011 6:56 am ---- Iv got the Bosch Aeros 21" and they have been fine, I have even swapped the blades over and it still happens
#13: Re: A bit of help Author: Lee, Location: EnglandPosted: Tue Jan 11, 2011 6:57 am ---- Must be the arm then like you said.
#14: Re: A bit of help Author: Mikey2uk, Location: StevenagePosted: Tue Jan 11, 2011 6:59 am ---- Cant see it being anything else to be honest
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17130
Online Now [366]:
Visitors: 365
Members: 0
Staff Online Now:
Page Views:
General
