#1: help - fog light cleaning (inside) Author: colinn, Location: IpswichPosted: Thu Jan 27, 2011 7:24 am ---- any one any ideas on how to clean the inside glass surface of foglights? - see pic - lots of spots on inside of glass
#2: Re: help - fog light cleaning (inside) Author: meady, Location: basingstokePosted: Thu Jan 27, 2011 7:53 am ---- Take the lake them apart clean and put back together
#3: Re: help - fog light cleaning (inside) Author: CD-B3, Location: Salisbury / New ForestPosted: Thu Jan 27, 2011 7:55 am ---- You sure they're on the inside?
Mine were covered in tiny spots due to stones.
#4: Re: help - fog light cleaning (inside) Author: Mike, Posted: Thu Jan 27, 2011 7:56 am ---- Mine resembles a pond to be honest
#5: Re: help - fog light cleaning (inside) Author: ersturbo, Location: crawleyPosted: Thu Jan 27, 2011 8:16 am ---- Not 100% sure about fog lights on 206's but if they dont come apart remove the fog from the bumper take light bulb out get a coat hanger or something then thick bit of cloth on the end with meths or something and simply just poke away at it for a while cleaning it, i have to do this with my lights :/
Mike wrote:
Mine resembles a pond to be honest
Lol just drill a tiny 0.5mm hole at the bottom of your lens right underneath where you wont see it
#6: Re: help - fog light cleaning (inside) Author: Jody.V, Location: East GrinsteadPosted: Thu Jan 27, 2011 8:36 am ---- Stick the fogs in the oven for about 20 mins, then prise them apart, clean the insides and re-seal
#7: Re: help - fog light cleaning (inside) Author: Danny., Location: PeterboroughPosted: Thu Jan 27, 2011 8:46 am ---- Correct me if im wrong...
But there's a hole where the bulb goes in..
Get a hose on the end of it... And then leave it near a radiator to dry...
#8: Re: help - fog light cleaning (inside) Author: ersturbo, Location: crawleyPosted: Thu Jan 27, 2011 8:54 am ----
Danny. wrote:
Correct me if im wrong...
But there's a hole where the bulb goes in..
Get a hose on the end of it... And then leave it near a radiator to dry...
#9: Re: help - fog light cleaning (inside) Author: Jody.V, Location: East GrinsteadPosted: Thu Jan 27, 2011 9:18 am ---- That would be easier. But prise them apart and you can spray the inside whilst you're there, which looks awesome
#10: Re: help - fog light cleaning (inside) Author: Cr4zYb0y, Location: SalisburyPosted: Thu Jan 27, 2011 9:19 am ----
Jody.V wrote:
That would be easier. But prise them apart and you can spray the inside whilst you're there, which looks awesome
Good idea..!
#11: Re: help - fog light cleaning (inside) Author: Abzynthe, Posted: Thu Jan 27, 2011 9:32 am ----
Jody.V wrote:
That would be easier. But prise them apart and you can spray the inside whilst you're there, which looks awesome
Im right in the middle of doing that lol!
#12: Re: help - fog light cleaning (inside) Author: Jody.V, Location: East GrinsteadPosted: Thu Jan 27, 2011 9:38 am ----
Abzynthe wrote:
Im right in the middle of doing that lol!
Dude you're doing your car so fast, you're putting the rest of us to shame!
#13: Re: help - fog light cleaning (inside) Author: colinn, Location: IpswichPosted: Thu Jan 27, 2011 10:11 am ---- thanks for the all the suggestions folks - initially thought bake and crack was too much trouble but am now tempted by the spraying idea
#14: Re: help - fog light cleaning (inside) Author: mattievrs, Location: LeicesterPosted: Thu Jan 27, 2011 10:24 am ----
CD-vRS wrote:
You sure they're on the inside?
Mine were covered in tiny spots due to stones.
This
#15: Re: help - fog light cleaning (inside) Author: Abzynthe, Posted: Thu Jan 27, 2011 10:53 am ----
Jody.V wrote:
Abzynthe wrote:
Im right in the middle of doing that lol!
Dude you're doing your car so fast, you're putting the rest of us to shame!
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17129
Online Now [74]:
Visitors: 73
Members: 0
Staff Online Now:
Page Views:
General
Good idea..! 
