#1: How to free up the bolt which hold the rear seat belt buckle Author: Seabook, Posted: Fri Feb 11, 2011 10:55 am ---- That's the one which hold 2 seat belt buckle onto the floor.
Try to take the bolt out, now it got stuck half way through, it won't move at all (can't loosen it or tighten it lol)
any suggestion?
tried to use impact wrench or 1 metric breaker bar with 17mm socket still won't move Last edited by Seabook on Fri Feb 11, 2011 11:03 am; edited 1 time in total
#2: Re: How to free up the bolt which hold the rear seat belt buckle Author: MrZiggerz, Location: Milton KeynesPosted: Fri Feb 11, 2011 10:56 am ---- Impact driver should move it =/
#3: Re: How to free up the bolt which hold the rear seat belt buckle Author: Seabook, Posted: Fri Feb 11, 2011 10:58 am ---- tried. no luck. maybe mine is not powerful enough :\
#4: Re: How to free up the bolt which hold the rear seat belt buckle Author: dan_206, Location: Bury St EdmundsPosted: Fri Feb 11, 2011 11:00 am ---- WD40 leave it bit, tighten back up leave bit longer then loosen. Worked with mine.
#5: Re: How to free up the bolt which hold the rear seat belt buckle Author: Howey, Location: Kings LynnPosted: Fri Feb 11, 2011 11:02 am ---- Yeah some kind of penetrating fluid shoud do it
#6: Re: How to free up the bolt which hold the rear seat belt buckle Author: Cr4zYb0y, Location: SalisburyPosted: Fri Feb 11, 2011 11:04 am ----
Howey wrote:
penetrating fluid
Kinky
Yeah this worked for me a treat..
#7: Re: How to free up the bolt which hold the rear seat belt buckle Author: Howey, Location: Kings LynnPosted: Fri Feb 11, 2011 11:05 am ----
Cr4zYb0y wrote:
Howey wrote:
penetrating fluid
Kinky
Yeah this worked for me a treat..
Oh really Andy??
#8: Re: How to free up the bolt which hold the rear seat belt buckle Author: Cr4zYb0y, Location: SalisburyPosted: Fri Feb 11, 2011 11:10 am ----
Howey wrote:
Cr4zYb0y wrote:
Howey wrote:
penetrating fluid
Kinky
Yeah this worked for me a treat..
Oh really Andy??
It is the weekend
#9: Re: How to free up the bolt which hold the rear seat belt buckle Author: Howey, Location: Kings LynnPosted: Fri Feb 11, 2011 11:22 am ---- Almost!
#10: Re: How to free up the bolt which hold the rear seat belt bu Author: MrBSI, Location: What's it to you? ? ?Posted: Fri Feb 11, 2011 1:19 pm ---- Most likely covered in rust where the end of the bolt is exposed under the car, penetrating oil should help, dont go mad undoing the bolt, you dont want to snap it.
#11: Re: How to free up the bolt which hold the rear seat belt buckle Author: davieboy86, Location: Kent,Posted: Fri Feb 11, 2011 1:37 pm ---- I know that bolt, that damn bolt, ended up leaving it half screwed, it didn't poke through the seats at all when put back in.
#12: Re: How to free up the bolt which hold the rear seat belt buckle Author: Seabook, Posted: Fri Feb 11, 2011 5:26 pm ----
MrBSI wrote:
Most likely covered in rust where the end of the bolt is exposed under the car, penetrating oil should help, dont go mad undoing the bolt, you dont want to snap it.
i know
have taken the other one out. half of the bolt is covered with rust
will try again tmr
davieboy86 wrote:
I know that bolt, that damn bolt, ended up leaving it half screwed, it didn't poke through the seats at all when put back in.
i hate bolts
#13: Re: How to free up the bolt which hold the rear seat belt bu Author: MrBSI, Location: What's it to you? ? ?Posted: Sat Feb 12, 2011 5:48 am ---- To be fair Peugeot would most likely reckon that bolt would never be removed during the cars lifetime.
#14: Re: How to free up the bolt which hold the rear seat belt buckle Author: CD-B3, Location: Salisbury / New ForestPosted: Fri Aug 12, 2011 7:49 am ---- I realise this is old, but I put a short section of scaffolding pole on the end of the socket and it eventually came out!
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy